|
| 1 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) |
| 2 | Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) |
| 3 | S & F 165x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,complete all as specified and directed. |
| 4 | S & F 105x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, lock strike plate, etc.,complete all as specified and directed. |
| 5 | M&L for cement concrete 1:3:6, type-C-0 (12.5mm graded stone aggrgate) as in filling in steel frame/roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed. |
| 6 | Refixing of Shutters of any description but exc 1 sq. m and n exc 2 sq. m each all as specified and as directed. |
| 7 | S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, factory made commercial type on both sides. |
| 8 | S & F 35 mm thick Second class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. |
| 9 | S&F 25 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides including with necessary fittings all as specified and as directed. |
| 10 | S & F Solid PVC Moulded Door Frame of size 100mmx45 mm made out of 5mm wood grain colour PVC Sheet reinforced with MS Square etc. |
| 11 | Supplying and fixing in Factory made solid PVC Moulded Door shutter 28 to 30 mm thick (style) with 2,4,or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. |
| 12 | S&F anodised aluminium frame for doors, windows, ventiletors with one or more rebates including joining cleat for fixing etc complete all as specified in cl power coating above aluminium section.(minimum thickness of poweder coating 50 micron). |
| 13 | S&F for anodised window/ventiletor shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle 1 no complete all as specified incl power coating of any colour (thick ness of powder coating not less than 50 micron). |
| 14 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165 |
| 15 | S & F 4 mm thick Sheet glass, ordinary quality and glazing with necessary aluminium beads in squares not exceeding 0.5 Sq. M in each pane all as specified and directed. |
| 16 | S & F 4 mm thick Sheet glass, ordinary quality in square exc 0.50sqm each pane glazed aluminium fitting with necessary fitting all as specified and directed. |
| 17 | S & F 4 mm thick frosted glass, ordinary quality in square n exc 0.50sqm each pane aluminium beads with necessary fitting all as specified and directed. |
| 18 | Supplyand fixed SS wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple complete all as specified and directed. |
| 19 | S&F in repair 18/19 mm thick pre-laminated particle boards exterior grade prelaminated both sides with decoratative choice lamination fixed in alum frame work as specified and as required. |
| 20 | S & F 100 mm long medium weight, cold rolled mild steel Butt hinges and fixed. |
| 21 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised. |
| 22 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section |
| 23 | S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy. |
| 24 | Supply fix in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified. |
| 25 | S&F in repairs 10 Ltrs. Capacity PVC flusing cistern low level slimline or equivalen make / model with all accessories. |
| 26 | Supply & Fix in repairs Vitreous china Curtis Set 610x350x710 P Trap Snow White two Piece Hall Hung EWC With B1020105 Twin Flush plastic cistern and B1510101 Carina Seat Cover Including flush pipe and fittings 'P' or 'S' traps. |
| 27 | S&F in repairs vitreous China squatting pan , ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (Excluding flushingcistern and flush pipe). |
| 28 | S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 450 x 300 mm size including cutting for and pinning ends of brackets or erecting stand including pedestal all as specified and as directed. |
| 29 | S & F for cromimum plated helth faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 mtr long Easy Flex tube in chrome finish complete all as directed |
| 30 | PVC connection 15 mm bore 450 mm long |
| 31 | S&F in repairs brass cromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges. |
| 32 | Supply and fix 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers incl taking down old one. |
| 33 | S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar of dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm. |
| 34 | S&F kitchen plate rack made of stainless steel sheet not less than 0.63mm thick of over all size 1050mm X 750mm X 250mm complete all as specified and as directed. |
| 35 | Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises. |
| 36 | Glazed ceramic white tiles in vertical surfaces 300x600X7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 . |
| 37 | M&L Non - skid white Ceramic tiles (square/ rectangular) area of each tile 300X300X8 mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes. |
| 38 | M&L Non - skid white Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile 600x600mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes. |
| 39 | M& L for Granite of any type 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl 20 mm thick screed bed 1:6 CM in floors in cluding demolition all as specified and directed. |
| 40 | M& L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl 20 mm thick screed bed 1:6 CM in floors in cluding demolition all as specified and directed. |
| 41 | M& L for Kota stone slab flooring of 20-25 mm thick over cement screed jointed with grey cement slurry mixed with pigment to match the shade of slab including grinding and polishing complete incl 20 mm thick screed bed 1:6 CM in floors. |
| 42 | M& L for Kota stone slab of 20-25 mm thick in riser,of steps, skirting, dado over cement screed jointed with grey cement slurry mixed with pigment to match the shade of slab including grinding and polishing complete incl 10 mm thick screed bed 1:4 CM in floors. |
| 43 | M&L for 75 mm thick cement concrete as in plinth protection type C-1 1:3:6 (using 20mm graded aggregate) finishing concrete surface even and smooth with using extra cement complete all as specified and directed. |
| 44 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 45 | M&L for Pre-cast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in landing, cover slabs (for manhole covers, drains , shelvess etc) set in CM 1:6 including demolition complete all as specified. |
| 46 | M & L for TMT reinforcement 10 mm dia and over cut to length bent to shape including cranking, hooking etc binding with mild steel wire not less than 0.90 mm dia (annealed) all as directed complete. |
| 47 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets. |
| 48 | S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with hangers 3 mm thick GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats if required made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and as directed. |
| 49 | M & L for 4m thick Non Asbestos designed Cement E board incl two coats of distempering in one side as approved by GE of size fixed in ceiling as specified and directed. |
| 50 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. |
| 51 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish complete all as specified and as directed. |
| 52 | M&L Brick work with sub class 'B' bricks straight of curved on plan exc 6m mean radius built in CM 1:6 including flush pointing with same mortar as the work proceed complete as specified. |
| 53 | M&L for 15 mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement |
| 54 | M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth. |
| 55 | M&L rendering 5mm thick of cement plaster 1:3 on concrete surfaces of ceiling finished even and smooth(without using extra cement.). |
| 56 | Supply only Integral water proofing compound |
| 57 | Roughening / complete Removing existing treatment incl pcc pedding of roof surfaces by picking, sweeping clean and washing down with water to remove dust etc., |
| 58 | M&L for brushing neat cement slurry with 03 Kg of cement per Sqm. |
| 59 | M&L for screed bed 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 . (Internal water proof compound measured seperately) |
| 60 | M&L 25 mm thick cement concrete PCC Type B0 1:2:4 using 12.5 mm graded aggregate. |
| 61 | M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including coating the surface with water based bituminous primer blow bitumen of 85/25 or 90/15 at 1.2 Kg/Sqm both at bottom and top of the membrance and finally finished with one coat of bitumenous aluminium primer at 100 gm per sqm complete all as specified. |
| 62 | Taking down rain water pipes inculding all fittings any size and pattern |
| 63 | S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls. |
| 64 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls. |
| 65 | S & F 110 mm bore PVC (SWR) bends of any radius. |
| 66 | S & F 75 mm bore PVC (SWR) bends of any radius. |
| 67 | S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door |
| 68 | S & F 75 mm bore PVC (SWR) Vent Cowl |
| 69 | M&L 75 mm bore for cast iron Nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) |
| 70 | Supply & fix 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed. |
| 71 | Supply & fix 40 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed. |
| 72 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store |
| 73 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store |
| 74 | Taking up or down 25 or 32 mm bore steel tubing and connections, including cleaning for Refixing or removal to store |
| 75 | Supply and laying 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 76 | Supply and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 77 | Supply and laying 32 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 78 | S & F in repairs 15mm bore angular/ concealed stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 79 | S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 80 | S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 81 | S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union |
| 82 | M&L for Rebuilding the section of damaged RCC elements to its original size or as per consultants recommendation in thickness of 40-100mm by providing and casting with ready to use non shrink, cementitious free flow micro-concrete SikaRep Microcrete-4 or equivalent having compressive strength > 60 N/mm2 (28 days) according to ASTM C 1107-99 including providing and fixing of watertight foam faced finish shuttering of minimum 18mm thickness and supporting formwork, all lead lift, mixing, placing, de-shuttering, levelling the surface by grinding off cementitious slurry or cementitious joints differences if any to satisfaction of Engineer-in-charge and curing. |
| 83 | Preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of Red Oxide, zinc chorme and applying two coat of synthetic enamel paint. |
| 84 | Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of synthetic enamel paint. |
| 85 | Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth , not otherwise described appling one coat of pink primer over applying two coat of synthetic enamel paint. |
| 86 | Preparation of old painted wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint. |
| 87 | Material & Labour for preparation of new wall surface appling Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface all as specified and as directed. |
| 88 | M & L for Complete removal of old surface for preparation of old wall Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface all as specified and as directed. |
| 89 | M&L for preparation of new plastered surfaces of walls and applying over and including 1mm thick wall care putty one primer coat and two coats of acrylic distemper including plastered surface to prepara-tory to distempering complete all as specified and directed. |
| 90 | M&L for complete removal of old surfaces of walls and applying over and including 1mm thick wall care putty one primer coat and two coats of acrylic distemper on plastered/putty surface to prepara-tory to distempering complete all as specified and directed. |
| 91 | Preparing new surfaces of ceilings by brooming down or by steel wire brushing and applying three coats of white wash. |
| 92 | M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete. |
| 93 | Dismantling water tanks and removing to store exc 500 & not exc 1000 ltrs |
| 94 | S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed. |
| 95 | M&L For 100 mm thick PCC Type C-2 1:3:6 using (40 mm graded aggregate) as in sub base all as specified and directed. |
| 96 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete |
| 97 | Taking down carefully existing unserviceable copper/ aluminium point wiring (light,fan , call bell, two way, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators, bell push,call bell,bracket light fittings and making good to the disturbed surface complete all as directed by Engr-in-Charge. |
| 98 | Taking down the existing unservicable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified by Engr-in- Charge. |
| 99 | Taking down carefully unsv aluminium submain wiring of any type /location including conduit /casing and earth wire and making good the distributed surface of walls /ceiling matching with existing finishes all as directed by Engr-in-Charge. |
| 100 | Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles all as specified and directed. Please Enable Macros to View BoQ information |
| 101 | Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles all as specified and directed. Please Enable Macros to View BoQ information |
