|
| 1 | Financial Bid Admin/RC/ 03/2026-AIIMS.JDH RATE CONTRACT FOR SUPPLY OF ORTHOPEDICS IMPLANTS ON CONSIGNMENT BASIS : Part-II AT AIIMS JODHPUR Tender Inviting Authority All India Institute of Medical Sciences, Jodhpur Name of the Firm: Address: Contact No.: E-Mail of Firms: |
| 2 | 2.0 Item Code Item Name Specification / Make/ Model /Size / Length / Holes/ Diameter Name of Quoted Company/Brand Make/ Model Price / Unit(Excl. GST) MRP |
| 3 | Latarjet procedure Preferably USFDA / European CE for all implants Wedged profile plate for latarjet procedure Screw, cannulated, fully threaded, titanium, 4mm diameter, length 30- 40 mm Guide wire, for 4 mm screws, 1.35 mm Å~ 150 mm, with trocar tip K-wire, for 4 mm screws, 1.4 mm Å~ 300 mm Screwdriver, T15 hexalobe, cannulated, for 4 mm screws Screw, cannulated, partially threaded, titanium, 4.5 mm Å~ 30 - 40 mm Guide wire, for 4.5 mm screws, 1.57 mm Å~ 17.78 cm, with trocar tip Guide wire, for 4.5 mm screws, 1.57 mm Å~ 304.8 mm, with trocar tip Handle, for 4.5 mm screws, 3.5 mm hex, 178 mm Screw, cannulated, partially threaded, titanium, 3.75 mm Å~ 30- 40 mm High-Strength Suture With UHMWPE Core and UHMWPE and Polyester Sleeve # 0 suture., 95-100 cm, with tapered needle, 22.2 mm . Circle # 0 suture., 95-100 cm, with diamond point needle, 22.2 mm . Circle # 0 suture., 95-100 cm, # 1 suture., 95-100 cm, # 1 suture., 95-100 cm,, white / black, # 2 suture., 95-100 cm, with tapered needle, 26.5 mm . Circle # 2 suture., 95-100 cm, blue, white / black, # 2 suture., 95-100 cm, , with reverse cutting needle, 36.6 mm . Circle # 2 suture., 95-100 cm, with 2 tapered needles, 26.5 mm . Circle # 2 suture., 95-100 cm, with tapered needle, 36.6 mm . Circle # 2 Suture With Loop and Single Suture Tail for Cinch Stitches suture Loop With Free Sliding Needle no. 0,2. Polyester Sleeve With Radiopaque Blue Marker to Protect Fingers During Knot-Tying |
| 4 | Arthroscopic Latarjet Screws system: Preferably USFDA / European CE for all implants 1. The system should allow to work arthroscopically or mini-open and is designed to provide reliability, consistency, and ease of use.2. Should be made up of titanium of 4.5mm (Dia) lag with top hat & flat screw head.3. Should have 1.7mm cannulation.4. Distal tip of screw should have cutting flutes with non-threaded proximal body to sit within coracoid for bone compression.5. The size should range from 30 to 38mm in increment of 2mm.6. The system should have complete instrumentation provided along with the implants |
| 5 | Arthroscopic bone block fixation with button system: Preferably USFDA / European CE for all implants 1. The system should allow to work arthroscopically or mini-open and is designed to provide reliability, consistency, and ease of use.2. The system should have complete instrumentation provided along with the implants |
| 6 | Pediatric DHS/DCS System |
| 7 | DHS Plates, standard barrel (38 mm barrel) Holes 2 to 20 Shaft Length(mm) 46-333. Barrel Angles 1300 – 1500 (with 50 gradual increment) |
| 8 | DHS Plates, short barrel (25 mm barrel Holes 2 to 6 Shaft Length(mm) 46-110 Barrel Angle. 1300 – 1500 (with 50 gradual increment) |
| 9 | DCS Plates Holes 6 to 22 Shaft Length(mm) 114-370 Barrel Angle. 95.0 |
| 10 | Lag Screws Shaft diameter 8 mm Thread length 22 mm Pitch 3.0 mm Diameter of cannulation 2.7 mm Length (mm) 50-145 Thread diameter 12.7mm; 14 mm |
| 11 | E. Compression Screw |
| 12 | F. Universal Locking Trochanter Stabilization Plate |
| 13 | G. Trochanter Stabilization Plate |
| 14 | LCP Paediatric Hip Plate System (2.7; 3.5 mm & 5.0 mm) – for Proximal Femoral Osteotomies A. Profiles (mm) B. Angles (degree) a. 2.7 100, 110, & 130 b. 3.5 & 5.0 100.0 110.0 120.0 130.0 140.0 150.0 Note: Paediatric Condylar Plate (900, 3.5/5.0 mm, 3/5/7 Holes) |
| 15 | Adolescent Femoral IM Nail • Cannulated• Diameter (mm) – 8.2/9.0/10.0• Lengths (mm) - 240 through 400 in 20 mm increments • Proximal Locking – 1200 antegrade locking; Two recon locking holes; one static and one dynamic transverse locking holes.• Distal Locking – Two transverse locking holes• Cross section – Helical Fluted• Recon Screws – 5.0 mm (50 -125 mm with 5 mm increments); partially threaded; 3.2 core diameter. • Locking Screws – 4.0 mm (18 -80 mm with 2 mm increments); 3.3 core diameter• End Caps – cannulated; 0/5/10/15 mm extension. |
| 16 | UMEX • K – wires – 0.8 – 2.5 mm• Knurled Rods – Straight (2/2.5 mm; 75/100/150/200 mm)/ Bent (L/Z shaped; 2.5/3.0/4.0 mm)• JESS Distractors: Single Hole (50/75 mm); Double Hole (75/100/150/200/250/300 mm); Fish mouth (150/200/250/300 mm); Swivel (100/150/200/250/300 mm)• Hinges/ LInk Joints - Small, Medium, Large• Clamps – Alpha (2/3 mm)/ Beta (3/4 mm)• Traction Stirrups • C-D Units – (25/36/50 mm)• Central Sleeve - (25/36/50 mm) |
| 17 | JESS Fixator |
| 18 | Paediatric Ilizarov • Composite Half Ring (80/90/100/110/120 mm Int. Dia.)• Composite Foot Ring (80/100 mm Int. Dia.)• Composite ¾ Ring (90/100/110/120 mm Int. Dia.)• Threaded Rod (40/60/80/100/120/150/200 mm Length)• Threaded Rod – Slotted (40/60 mm Length)• Ilizarov Wires (1.0/1.2/1.5 mm Dia.) (250/300 mm Length)• Olive Wires (1.0/1.2/1.5 mm Dia.) (250/300 mm Length) • Wire Fixation Bolt (Cannulated/ Slotted)• Wire Fixation Buckle • Post – Male (2/3/4 Holes)• Post – Female (2/3/4 Holes)• Hinges – Male • Hinges – Female • Universal Joint• Connection Bolts (10/16 mm Length)• Connection Nuts (M5 – Standard/ Nylon Nut/ Triangular Nut)• Bushings• Plates – Standard/ Twisted 900• Plate Adaptor (20/30 mm Length)• Washers - Standard (1.0 mm/1.5 mm/ Slotted)/ Conical Coupler• Blocks for Half Pins – (1/2 Hole)• Telescopic Rod (40/60/80 mm Length)• Oblique Support • Wrench – Box/ Combination (8 mm)• Wire Tensioner |
| 19 | Pediatric Rail System (Pitkar) • Rail (150/200/250 mm Length)• Clamps – Central/ End/ Swivel • CD Unit • Half Pins |
| 20 | Bone Staples (Smith & Nephew)• Table Fixation Staples• Osteotomy Fixation Staples• Regular Fixation Staples• Krakow HTO Staples |
| 21 | Epiphysiodesis Eight Plate 12/16/20 mm |
| 22 | PRECISE Nail System |
| 23 | Tomofix Osteotomy System |
| 24 | A. MHTP (Medial High Tibial Plate) Dimensions Standard(mm) Small(mm) Anatomical(mm) Length 115 112 112 Width 16mm 14mm 14 mm Thickness 3 mm 3.2 mm 3.2 mm Gap (Prox. Holes) 11 mm 9 mm 9 mmRadius (Prox. Part) 38 mm 30 mm 30 mmSagittal Angle (Prox. Screws) 100 caudally 110 caudally 100 caudally Length |
| 25 | B. LHTP (Lateral High Tibial Plate) |
| 26 | C. LDFP (Lateral Distal FemurPlate) |
| 27 | D. MDFP (Medial Distal Femur Plate) Note: Tomofix Osteotomy Chisels (10/15/20/25 mm); Titanium Spacer (5.0 X 2.0 mm); Bone Spreader; Osteotomy Gap Measuring Device. |
| 28 | Small Fragment LCP System Profile |
| 29 | A. Cortex Screws 3.5 mm |
| 30 | B. Locking Screws |
| 31 | C. Cancellous Bone Screws 4.0 mm; Solid; Partially Threaded 4.0 mm; Cannulated; Short Threads |
| 32 | D. 3.5 mm LCP Plates |
| 33 | E. 3.5 mm LCP T- Plates |
| 34 | F. 3.5 mm LCP T- Plates |
| 35 | G. 3.5 mm LCP T- Plates |
| 36 | H. 3.5 mm LCP T- Plates |
| 37 | I. LCP 1/3rd Tubular Plates with Collar |
| 38 | J. 3.5 mm LCP Reconstruction Plates |
| 39 | K. 3.5 mm LCP Proximal Humerus Plates |
| 40 | titanium Elastic Nailing System Diameter (mm) |
| 41 | A. Nails 2.0 (Green) 2.5(Pink) 3.0(Gold) 3.5(Blue) 4.0(Purple) |
| 42 | B. End Camps 3.0, 3.5, 4.0 (Green) Stainless Steel Elastic Nailing System is also available in same configuration without any colour coding. |
| 43 | Distal femur resection by MegaC system Product Qt 2.0 Solid joint component for distal femur replacement small right 1.0 3.0 Solid joint component for distal femur replacement medium right 1.0 4.0 Solid joint component for distal femur replacement large right 1.0 3,5,7,9 Solid joint component for distal femur replacement small right 1.0 3.0 Solid joint component for distal femur replacement medium right 1.0 3.0 Solid joint component for distal femur replacement large right 1.0 3.0 Stem segments ( 20mm,30mm,40mm,60mm) 1 each Cemented/uncemented megaC stem ( 100mm, 130mm, 160mm) 1 each Support ring 1.0 centraliser ( 12mm, 14mm,16mm) 2 each |
| 44 | Proximal Tibia resection Proximal tibial replacement joint component small right 1.0 Proximal tibial replacement joint component medium right 1.0 Proximal tibial replacement joint component large right 1.0 Proximal tibial replacement joint component small left 1.0 Proximal tibial replacement joint component medium left 1.0 Proximal tibial replacement joint component large left 1.0 support ring 1.0 Cemented/uncemented megaC stem ( 100mm, 130mm, 160mm) 1 each Stem segments ( 20mm,30mm,40mm,60mm) 1 each centraliser ( 12mm, 14mm,16mm) 2 each |
| 45 | Proximal femur replacement MegaC neck segment short/long 1 each coupling short/long 1 each proximal spacers 10mm & 20mm 1 each Stem segments ( 20mm,30mm,40mm,60mm) 1 each support ring 1.0 Cemented/uncemented megaC stem ( 100mm, 130mm, 160mm) 1 each expanson bolt short/long 1 each centraliser ( 12mm, 14mm,16mm) 1 each |
| 46 | Diaphysial spacer Coupling for diaphysial spacer 1.0 support ring 1.0 Stem segments ( 20mm,30mm,40mm,60mm) Cemented/uncemented megaC stem ( 100mm, 130mm, 160mm) centraliser ( 12mm, 14mm,16mm) Reverse Shoulder arthroplasty Company quoting for any part should have complete system The implant should have good 10 year survivoship data All the implants Should have preferably ODEP(Orthopaedic Data Evaluation Panel) Rating minimum of 10A* |
| 47 | Humeral Stem- Inlay Design Short Humeral Stems Should have Distal 5mm-12mm (Dia.) Short Humeral Stems Should have 56mm -77mm (Length) Long Humeral Stems Should have Distal 6mm,8mm,10mm,12mm (Dia.) Long Humeral Stems Should have 89mm -116mm (Length) Extra Long Humeral Stems Should have Distal 7mm,9mm (Dia.) Extra Long Humeral Stems Should have 150mm (Length) Humeral Stems should have Metaphysis 32mm,34mm,38mm,42mm (Dia.) Humeral Stems should have Metaphysis coating of Ti Plasma Spray Reverse Neck Shaft Angle should have options of 135 degree and 145 degree Humeral Stem should have an option of +9mm spacers |
| 48 | Shoulder arthroplasty: Humeral Stem- Onlay Design Short Humeral Stems Should have Distal 5mm-12mm (Dia.) Short Humeral Stems Should have 56mm -77mm (Length) Long Humeral Stems Should have Distal 6mm,8mm,10mm,12mm (Dia.) Long Humeral Stems Should have 89mm -116mm (Length) Extra Long Humeral Stems Should have Distal 7mm,9mm (Dia.) Extra Long Humeral Stems Should have 150mm (Length) Humeral Stems should have Metaphysis 32mm,34mm,38mm,42mm (Dia.) Humeral Stems should have Metaphysis coating of Ti Plasma Spray Reverse Neck Shaft Angle should have options of 135 degree and 145 degree Humeral Stem should have an option of +9mm spacers |
| 49 | Shoulder arthroplasty: Humeral Stem- Midlay Design Short Humeral Stems Should have Distal 5mm-12mm (Dia.) Short Humeral Stems Should have 56mm -77mm (Length) Long Humeral Stems Should have Distal 6mm,8mm,10mm,12mm (Dia.) Long Humeral Stems Should have 89mm -116mm (Length) Extra Long Humeral Stems Should have Distal 7mm,9mm (Dia.) Extra Long Humeral Stems Should have 150mm (Length) Humeral Stems should have Metaphysis 32mm,34mm,38mm,42mm (Dia.) Humeral Stems should have Metaphysis coating of Ti Plasma Spray Reverse Neck Shaft Angle should have options of 135 degree and 145 degree Humeral Stem should have an option of +9mm spacers |
| 50 | Shoulder arthroplasty : Reverse Insert/Liner/Poly- Reverse Inserts should have different sizes-Symmetric,Symmetric Retentive or Constraint Symmetric, 10 degree/Asymmetric and 10 degree Retentive/Asymmetric Retentive or Constraint Asymmetric. Reverse Inserts should have 33mm,36mm,39mm,42mm (Dia.) Reverse Inserts should have an offset option of +3mm,+6mm |
| 51 | Shoulder arthroplasty Glenoid:For RSA Baseplate- Glenoid Baseplate should have 25mm,29mm (Dia.), Material -Ti, Fixation Technology - Adaptis Porous Ti Glenoid Baseplate Backside Geometry should be Flat: Standard/Lateralized, Curved: Augment Wedge Glenoid Baseplate should have Lateralization option of +3mm,+6mm Glenoid Baseplate should have Augment option Glenoid Augment Baseplate should be Half Wedge 35degree,Full Wedge 15degree |
| 52 | Shoulder arthroplasty : Press-Fit Post Glenod Baseplate should have Central Fixation option with Press-Fit Post of Short Length 7mm,Long Length 15mm |
| 53 | Glenoid Baseplate Central Screw: Glenoid Baseplate should have Central Fixation option with Screw: 25mm,30mm,35mm,40mm (Length) and 6.5mm,9.5mm (Dia.) |
| 54 | Glenoid Baseplate Peripheral Screw: Glenoid Baseplate Peripheral Screw should have 5mm (Dia.), 14mm-54mm (Length) Glenoid Baseplate should have Peripheral Screw Fixation option with 2 locking,2 compression or 3 locking,1 compression |
| 55 | Glenosphere- Material: CoCr Glenosphere should have 33mm,36mm,39mm,42mm (Dia.) Glenosphere should have eccentric offset option: +2mm,+3mm,+4mm (size independent) Glensophere should have Lateralization of +3mm Glenosphere should have Morse Taper + locking washer/screw attachment with Baseplate |
| 56 | Hemi Shoulder |
| 57 | Fracture Stem Reverse Morse Taper provides the ability to move between a hemi, total, or reverse shoulder arthroplasty without removing a well-fixed Comprehensive Fracture Stem Anatomic 45 degree neck angle provides ample room under the collar for tuberosity reconstruction Contoured suture holes provide for significant reduction in suture wear. Six diameters available: 4, 6, 8, 10, 12, and 14mm Designed for cemented or uncemented applications |
| 58 | Humeral Head - Different variable sizes available in 38mm, 42mm, and 46mm |
| 59 | Taper Adaptor |
| 60 | Total Shoulder |
| 61 | Humeral Stems 45°/135° anatomic neck-shaft angle PPS Porous Plasma Spray coating proximally to enhance biologic fixation Reverse Morse taper allows for increased access to the glenoid and conversion to the Comprehensive Reverse Shoulder Uncemented or cemented use Available in Micro, Mini and Revision lengths |
| 62 | Hybrid Glenoid Non-conforming diameter of curvature provides the ability to use any size head with any size glenoid Three outer pegs for cemented fixation Two central peg options 1. Regenerex® Porous Titanium Construct for biologic fixation 2. Polyethylene compression fit for cemented use IV. Small, Medium and Large glenoid base sizes |
| 63 | Humeral Head Infinite offset options between 0.5 and 4.5 Allows for accurate reproduction of natural anatomy 17 Head Sizes, ranging from 38 to 58 mm in diameter and 18 – 27 mm in height |
| 64 | Taper Adaptor REGULAR 4\\" HUM C/M 6\\" XSMALL HUM C/M REGULAR 6\\" HUM C/M 4\\" XSMALL HUM C/M SMALL 6\\" HUM C/M HUMERAL ASSY 6 IN SML |
| 65 | Elbow Replacement: All the implants Should have ODEP(Orthopaedic Data Evaluation Panel) Rating minimum of 10A* All implants Should be preferably USFDA Approved |
| 66 | Humeral Stems I. Twelve Humeral Stems – 4”, 6”, and 8” lengths in extra-small, small, and regular sizes II. Triangular to match canal landscape maximizing stability by minimizing rotation III. Proximal humeral flange permits insertion of bone graft anteriorly to enhance thickening of bone stock where maximum stress occurs, reducing posterior displacement and torsional forces and helping protect bone/cement/implant interface IV. Tivanium Ti-6Al-4V Alloy for durable, lightweight construction |
| 67 | Ulnar Stems I. Twelve Ulnar Stems – regular and long lengths in extra-small, small, and regular sizes II. Plasma spray coating provides enhanced cement fixation; implant intended to be used with bone cement for both immediate and long-term fixation III. Quadrangular to match canal landscape, to help minimize intramedullary rotation in the ulna |
| 68 | Absorbale calcium sulphate antibiotic beads 5cc |
| 69 | Absorbale calcium sulphate antibiotic beads 10cc |
| 70 | Knee moulds |
| 71 | Hip Moulds |
| 72 | Shoulder moulds |
| 73 | artificial bone graft |
| 74 | Cement Gun Disposable |
| 75 | BIPOLAR - MODULAR - CEMENTED AND UNCEMENTEDa |
| 76 | LINER ASSY 38MM OD X 22MM ID |
| 77 | LINER ASSY 39MM OD X 22MM ID |
| 78 | LINER ASSY 40/41OD X 22ID |
| 79 | LINER ASSY 42/43OD X 22ID |
| 80 | LINER ASSY 44/45/46OD X 28ID |
| 81 | LINER ASSY 47/48/49OD X 28ID |
| 82 | LINER ASSY 50/51/52OD X 28ID |
| 83 | LINER ASSY 53/54/55OD X 28ID |
| 84 | BIPOLAR METAL SHELL 38 MM OD |
| 85 | BIPOLAR METAL SHELL 39 MM OD |
| 86 | BIPOLAR METAL SHELL 40 MM OD |
| 87 | BIPOLAR METAL SHELL 41 MM OD |
| 88 | BIPOLAR METAL SHELL 42 MM OD |
| 89 | BIPOLAR METAL SHELL 43 MM OD |
| 90 | BIPOLAR METAL SHELL 44 MM OD |
| 91 | BIPOLAR METAL SHELL 45 MM OD |
| 92 | BIPOLAR METAL SHELL 46 MM OD |
| 93 | BIPOLAR METAL SHELL 47 MM OD |
| 94 | BIPOLAR METAL SHELL 48 MM OD |
| 95 | BIPOLAR METAL SHELL 49 MM OD |
| 96 | BIPOLAR METAL SHELL 50 MM OD |
| 97 | BIPOLAR METAL SHELL 51 MM OD |
| 98 | BIPOLAR METAL SHELL 52 MM OD |
| 99 | BIPOLAR METAL SHELL 53 MM OD |
| 100 | BIPOLAR METAL SHELL 54 MM OD |
| 101 | BIPOLAR METAL SHELL 55 MM OD |
| 102 | Cemented Total Hip System |
| 103 | Cemented Femoral Stem (titanium alloy, Double Tapered)- 12/14 Taper, Collarless, reduced lateral shoulder taper, wedge type with an option of having same instrument can be used for cemented and uncemented Stem with various sizes. No centralizer rquired in application, Good Survivour data over 15 years. |
| 104 | Metal Modular Head 28mm (12/14 Taper) made up of COCR with at least 4 variable Neck Length |
| 105 | Cemented Cup made up of highly crossed linked polyethylene various sizes , 28,32,36 mm head ( 32 mm head starts with sz 45 OD cup) |
| 106 | Bone Cement - 2 packets - 40 Gm ( Need different packet For cup and stem fixation ) |
| 107 | Cement Restrictor |
| 108 | Cancellous Bone Screw 6.5 mm dia and various sizes 20-50 mm |
| 109 | Uncemented hip stem : Good Survivor data over 15 years. Provided with complete instrumentation |
| 110 | Uncemented cup : Good Survivor data over 15 years. Provided with complete instrumentation |
| 111 | Revision hip stem including all long stem sizes, all modular stem sizes. Good Survivor data over 15 years. Provided with complete instrumentation |
| 112 | Revision acetabular cup : Including and not limited to, multihole cup, cages, revision cups. Good Survivor data over 15 years. Provided with complete instrumentation |
| 113 | Acetabular wire mesh for revision |
| 114 | Total Knee Replacement (All Poly Primary Knee ) |
| 115 | Posterior stabilized HI-FLEX Femoral Component made up of highly polished CoCr alloy , size ranges from 2 to 8 with 1 mm increments, lugs for further add to stability. Good Survivour data over 10 years. |
| 116 | APT Tibia Base and Tibial Insert containg an Antioxident material corvernox in making. good locking mechanism and verious size option , size ranges from 5 to 14 with 1 mm increments and congruent with femur design,with specifific centraly insert locking mechanism. APT tibiavarious sizes ranges from 2 to 8mm, 1 mm incements.Can accommodate +/- 1 size as per the size of the Femoral component. Poly tibia should have micro lock Chamfers for better cement fixation . |
| 117 | Patellar Button with all sizes 29, 32, 35, 38 mm with different option like medialized dome or anatomic patella and should have an antioxidant covernox |
| 118 | Total Knee Replacement metal backed (Primary Knee) |
| 119 | Revision total knee replacement system with all the options of constraint from partial to complete. |
| 120 | Unicondylar knee replacement: mobile bearing |
| 121 | Unicondylar knee replacement: Fixed bearing Item Code Product Name Specification |
| 122 | Anterior cervical locking plate- |
| 123 | Anterior Cervical interbody fusion device with screw- |
| 124 | Anterior Cervical interbody fusion cage- |
| 125 | Odontoid screw - |
| 126 | Cervical Round/Over mesh cage - |
| 127 | Thoracolumbar Vertebral body Replacement Mesh cage - |
| 128 | Sublaminar Titanium cable system- |
| 129 | DISC PROSTHESIS FOR CERVICAL SPINE- |
| 130 | PLIF/ TLIF Cage- |
| 131 | Olif Cage- |
| 132 | Polyaxial/Monoaxial pedicle screw system - |
| 133 | Pedicle screw system with cobalt chrome Multiaxial Head - |
| 134 | Percutaneous pedicle screw fixation system- |
| 135 | Demineralized bone Metrix Bone (DBM)- |
| 136 | BMP- GRAFT- |
| 137 | Synthetic Granules Bone Graft- |
| 138 | Bone Cement- |
| 139 | Lateral mass & Occipitocervical Module- |
| 140 | Expandable Corpectomy cage- |
| 141 | Kyphoplasty & vertebroplasty kit- |
| 142 | Compact Hand System 2.7 MM LCP 2.7 MM LCP WITH RIGHT 2 HOLE HEAD 2.7 MM LCP WITH LEFT 2 HOLE HEAD 2.7 MM LCP, OBLIQUE WITH RIGHT 2 HOLE HEAD 2.7 MM LCP, OBLIQUE WITH LEFT 2 HOLE HEAD 2.7 MM LCP CONDYLER PLATE 2.7 MM LCP ADAPTION PLATE 2.7 MM LCP T PLATE 2 HOLE HEAD 2.4 MM LCP 2.4 MM LCP CONDYLER PLATE 2.4 MM LCP ADAPTION PLATE 2.4 MM LCP T PLATE 2 HOLE HEAD 2.4 MM LCP T PLATE 3 HOLE HEAD 2.4 MM LCP Y PLATE 3 HOLE HEAD 2 MM LCP 2 MM LCP CONDYLER PLATE 2 MM LCP ADAPTION PLATE 2 MM LCP T PLATE 2 HOLE HEAD 2 MM LCP T PLATE 3 HOLE HEAD 2 MM LCP Y PLATE 3 HOLE HEAD MINI H PLATE SCREWS 2 MM CORTEX SCREWS 2.4 MM CORTEX SCREWS 2.7 MM CORTEX SCREWS 2 MM LOCKING SCREWS 2.4 MM LOCKING SCREWS 2.7 MM LOCKING SCREWS LCP Plate 1.5, straight LOCKING Plate 1.5, straight LOCKING T Plate 1.5, 3 HOLE HEAD LOCKING Tn Plate 1.5, 4 HOLE HEAD Locking Y-Plate 1.5, 3 HOLE HEAD Locking Condylar Plate 1.5, 2 HOLE HEAD Locking Strut Plate 1.5 Plates, with Preassembled Short Drill Sleeves LCP Plate 1.5, straight LOCKING Plate 1.5, straight LOCKING T Plate 1.5, 3 HOLE HEAD LOCKING Tn Plate 1.5, 4 HOLE HEAD Locking Y-Plate 1.5, 3 HOLE HEAD Locking Condylar Plate 1.5, 2 HOLE HEAD Locking Strut Plate 1.5 Adaption Plate 1.3, straight T-Adaption Plate 1.3, 3 HOLE HEAD T-Adaption Plate 1.3, 4 HOLE HEAD V-Adaption Plate 1.3, 3 HOLE HEAD Strut Plate 1.3 |
| 143 | lower limb |
| 144 | A.Distal femur LCP 4.5mm Holes 5,7,9,11,13 Length(mm) 156196236276316.0 5.0mm Locking Screws, self drilling/self tapping(mm) 18,26,40,55,65,75,85 5.0mm Periprosthetic Locking Screws,self tapping(mm) 8,10,12,14,18 4.5mm cortical screws (self tapping/non self tapping) 14 to 72(2mm increase), 76,80 to 100(5mm increase) |
| 145 | B.Proximal lateral tibia LCP 4.5mm (hockey) Holes 5,7,9,11,13 Length(mm) 140180260300.0 5.0mm Locking Screws, self drilling/self tapping(mm) 18,26,40,55,65,75,85 5.0mm Periprosthetic Locking Screws,self tapping(mm) 8,10,12,14,18 4.5mm cortical screws (self tapping/non self tapping) 14 to 72(2mm increase), 76,80 to 100(5mm increase) |
| 146 | C.Proximal lateral tibia LCP 4.5mm (L shape) Holes 4, 6, 8, 10, 12, 14 Length(mm) 140180260300.0 5.0mm Locking Screws, self drilling/self tapping(mm) 14 to 48(2mm increase), 50 to 90(5mm increase) 5.0mm Cannulated Locking Screws (mm) 25 to 145 (5mm increase) 4.5mm cortical screws (self tapping/non self tapping) 14 to 70(2mm increase) |
| 147 | D. Proximal lateral tibia LCP 3.5mm (raft) Holes 4, 6, 8, 10, 12, 14,16 Length(mm) 8.11071331591852e+19 |
| 148 | E. Proximal medial tibia LCP 3.5mm Holes 4, 6, 8, 10, 12, 14,16,18,20 Length(mm) 93,,119,145,171,197,223,249,275,301 |
| 149 | F. Proximal tibia postero-medial /posterior LCP 3.5mm Holes 1,2,4,6,8,10 Length(mm) 69,79,105,131,157,183 G. Distal tibia medial LCP 3.5mm(low profile) Holes 4, 6, 8, 10, 12, 14 Length(mm) 116,,142,168,194,220,,246 |
| 150 | H. Diatal tibia antero-lateral LCP 3.5mm Holes 5,7,9,11,13,15,17,19,21 Length(mm) 80,,106,132,158,,184,210,236,,262,288 |
| 151 | I. Diatal fibula lateral LCP 2.7mm / 3.5mm Holes 3,4,5,6,7,9,11 Length(mm) 73,86,99,,112,,125,151,177 |
| 152 | J. Diatal fibula postero-lateral LCP 2.7mm / 3.5mm Holes 3,4,5,6,7,9,11 Length(mm) 77,,90,103,116,129,,155,181 |
| 153 | K. Small LCP screw box 3.5mm 3.5mm Locking Screws, self tapping(mm) 10 to 60 mm(2mm increase);65 to95m(5mm increase) 3.5mm cortical screws (self tapping/non self tapping) 10 to 50mm(2mm increase);55 to 110mm(5mm increase) 2.7mm cortical screw 10 to 38mm(2mm increase);40to 55mm(5mm increase) 4mm cancellous screw fully thtreaded 10 to 28mm(2mm(increase); 30 to 100mm(5mm increase) 4mm cancellous screw partially thtreaded 10 to 28mm(2mm(increase); 30 to 100mm(5mm increase) 4mm cannulated cancellous screws 10 to 72(2mm increase) |
| 154 | L. Variable angle locking anterior patella plates 2.7mm Small Core, 3-hole, 6-hole Standard Core, 3-hole, 6-hole |
| 155 | L. Variable angle locking calcaneal plates 2.7mm Small 58.0 Medium 64.0 Large 70.0 |
| 156 | Periprosthetic femur |
| 157 | A. Periprosthetic proximal fermur plate Holes 9,12,15,18,21 Length(mm) 245,,285,,324,363,,401 |
| 158 | B. Periprosthetic distal femur plate Holes 9,12,15,18,21 Length(mm) 238,,278,,317,355,393 |
| 159 | C. Periprosthetic distal femur plate Holes 9,12,15,18,21 Length(mm) 238,,278,,317,355,393 |
| 160 | D. Periprosthetic fermur shaft plate Holes 10,12,,14 Length(mm) 210,249,,289 |
| 161 | E. Periprosthetic trochanter plate Peri prosthetic fracture plate for humerus all sizes |
| 162 | F. Screws 5 mm unicorical 10 to 20 mm(2mm increase) 5mm 22 to 48 mm(2mm increase) 50 to 100(5mm increase) 5mm cancellous 50 to 100mm(5mm increase) 4mm 20 to 48 mm(2mm increase) 50 to 65(5mm increase) 4mm deep thread 20 to 48 mm(2mm increase) 50 to 65(5mm increase) 3.5mm locking 12 to 60(2mm increase ) 3.5mm cortical 12 to 38(2mm increase ); 40 to 60mm (5mm increase) 5 mm cortical 30 to 60 mm( 2mm increase) |
| 163 | upper limb |
| 164 | A. Proximal humerus LCP 3.5mm(PHILOS) HolesLength(mm) 3,4,5,6,7,8,10,11,12,13106,124,142,60,178,196,214,,232,250,268,,286 |
| 165 | B. Distal humerus posterolateral LCP with lateral support 3.5mm Holes 3,5,7,9,14 Length(mm) 65,,90,116,142,208 |
| 166 | C. Distal humerus posterolateral LCP 3.5mm HolesLength(mm) 3,5,7,9,1465,,90,116,142,208 |
| 167 | D. Distal humerus medial LCP 3.5mm Holes 3,5,7,9,14 Length(mm) 58,,83,110,136,201 |
| 168 | E. Distal humerus extra articular LCP 3.5mm Holes 6,8,10 Length(mm) 158194230.0 * Humerus nailing system with multiple (> 4) locking and screw options all sizes |
| 169 | E. Olecranon plate 3.5mm Holes 2,4,6,8,10,12 Length(mm) 86,,112,138,164,189,215 |
| 170 | F. Anatomical clavicle plate 3.5mm HolesLength(mm) 6,7,894,110,,120 |
| 171 | G. Lateral end clavicle plate 3.5mm Holes 3,4,5,6,7,8 Length(mm) 69,81,,94,108,,123,135 |
| 172 | H. Hook clavicle plate 3.5mm Holes 4,5,6,7 Length(mm) 70,85,99,112 Hook depth (mm) 12,15,18 |
| 173 | J. Radiak head plate 2.4mm (rim plate) Holes 2,3,4 Length(mm) 34,46,56 |
| 174 | K. Radial head plate 2.4mm (neck plate) Holes 2,3,4 Length(mm) 28,40,50 |
| 175 | M. Variable angle Volar distal radius plate 2.4mm Width 19.5 mm Holes 2,3,4,5 Length(mm) 42,51,63,72 Width 22 mm Holes 2,3,4,5 Length(mm) 45,54,66,75 Width 25.5mmHoles 2,3,4,5 Length(mm) 47,55,68,77 |
| 176 | N. Distal radius plate 2.4mm Dorsal plate Holes 5,6 L plate (left and right angled) Holes 2,3,4 T plate(3 hole head) Holes 3,4 Juxta articular(5hole head)Holes 3,5 Extra-articular(4,5 hole head)Holes 3,5 Extra-long plate (4 hole head)Holes 8,10,12 2.4mm locking screws 6 to 30mm(2mm increase) 2.4mm cortical screws 6 to 30mm(2mm increase) 2.7mm cortical screws 10 to 30mm(2mm increase) |
| 177 | K. Small LCP screw box 3.5mm 3.5mm Locking Screws, self tapping(mm) 10 to 60 mm(2mm increase);65 to95m(5mm increase) 3.5mm cortical screws (self tapping/non self tapping) 10 to 50mm(2mm increase);55 to 110mm(5mm increase) 2.7mm cortical screw 10 to 38mm(2mm increase);40to 55mm(5mm increase) 4mm cancellous screw fully thtreaded 10 to 28mm(2mm(increase); 30 to 100mm(5mm increase) 4mm cancellous screw partially thtreaded 10 to 28mm(2mm(increase); 30 to 100mm(5mm increase) 4mm cannulated cancellous screws 10 to 72(2mm increase) |
| 178 | Expert A2FN Cannulated Diameter (mm)- 9 to 14 mm with 1 mm increments Length(mm)-280 through 460 in 20 mm increments Proximal Locking-Standard locking120 degree antegrade locking; one static and one dynamic transverse locking holes ; Two recon locking holes; Distal Locking- Three locking holes; two static and one dynamic Recon screw-6.5 mm ( Corec diameter- 4.5 mm, Length- 60 -130 mm with 5 mm increments Locking screw-5 mm ( Core diameter- 4.3 mm, Length- 26 -80 mm with 2 mm incements and 85- 100 mm with 5 mm increments End Caps-cannulated; 0/5/10/15/20 mm extension. |
| 179 | PFNA( Proximal Femoral nail antirotation ) -II Cannulated Diameter (mm) Short: 9 - 12 with 1 mm increments; Long- 9 and 10 mm Length (mm): Short :170/200/240 : Long 260 - 340 with 20 mm increments and 340-420 with 40 mm increments CCD angle-125 - 130 degree Blade- 75 - 120 mm with 5 mm inrements Locking Bolt (mm)- 4.9 mm; 16- 60 mm with 2mm increments; 60 - 80 mm with 4 mm increremts; 80 - 100 mm with 5 mm incremets Locking screw (mm): 5mm ; 26- 80 mm with 2 mm incremenmts ; 85 - 100 mm with 5 mm increments End Cap:0/5/10/15 mm extension |
| 180 | TFNA Cannulated Diameter(mm) : Proximal- 15.66 , distal-9/10/11/12 / 14 (long) Length (mm): Short : 170/200/235 ; Long- 300- 480 with 20 mm increments Angles: 125/ 130/135 degree TFNA Head screw (mm):- diameter 10.35 , Length: 70- 130 with 5 mm increments TFNA helical blade (mm):- diameter 10.35 , Length: 70- 130 with 5 mm increments Locking Screw: 4.2 mm , Lenght : 26- 80 mm with 2 mm incrementrs and 80 -100 mm with 5 mm increments End Cap:0/5/10/15 mm extension |
| 181 | Expert Tibia Nail Cannulated Diameter(mm):8-13 with 1 mm increments; Proximal: 8 to 10 mm=11mm and 11to 13 mm=equal to shaft diameter Length (mm): 255 - 465 with 15 mm increments Proximal locking: 4 static and 1 dynamic Distal locking: 1 oblique, 1AP and 2 medio lateral Cross section: 8-10 = round and 11-13 =flute Cancellous locking screw: 5 mm , lenght:30 - 90 mm with 5 mm increments Standard Locking screw:4 mm with 3.3 mm core diameter, length: 18 - 80 mm with 2 mm increments for 8- 9 mm nail Standatrd Locking screw:5 mm with 4.3 mm core diameter, length: 26 - 100 mm with 2 mm increments, 85 to 100 mm with 5 mm increments for 10-13 mm nail End Cap:0/5/10/15 mm extension |
| 182 | Expert Hindfoot Arthrodesis nail Cannulated Diameter(mm):10/12/13 Length (mm): 150/180/240 Cross section: 10 mm-round;12 -13 mm:fluted Proximal locking: 5mm , one static and one dynamic locking hole Distal locking: 5mm static oblique locking, 6mm static transverse and 6mm spiral blade slot Locking screw:5 mm and 6 mm, length: 26 mm to 80 mm with 2 mm incremnets; 80 to 100 mm with 5 mm increments Spiral blades:12.5 mm, length: 45 to 100 mm with 5 mm increments |
| 183 | EXTERNAL FIXATOR SET |
| 184 | Tubular rods - diameter 10-11mm, 4 inches – 16 inches (increments of 2) |
| 185 | Universal clamp |
| 186 | Tube to tube clamp |
| 187 | Shanz pin |
| 188 | Cancellous pin 6.5 mm |
| 189 | Cortical pin 4.5 mm |
| 190 | T clamp |
| 191 | Spanners NO. 10,11 |
| 192 | FOREARM FIXATOR SET |
| 193 | Solid rods diameter 4 mm, length 4 inches – 14 inches ( increments of 2) |
| 194 | Forearm pins 3.5mm |
| 195 | Metacarpal pins 2.5 mm |
| 196 | Small universal Clamp |
| 197 | Small tube to tube clamp |
| 198 | Spanner No 7,8 |
| 199 | HYBRID FIXATOR SET |
| 200 | Half rings 120, 140, 160, 180 |
| 201 | Long K wire – 1.8mm, 1.5mm |
| 202 | long K wire with olive – 1.8mm, 1.5 mm |
| 203 | K- Wires |
| 204 | stainless steel/ titanium |
| 205 | option for wires which are sharp single end/ both ends |
| 206 | sizes diameter mm 1,1.5,2,2.5,3 |
| 207 | Arthroscopic Implants SL NO GENERAL SPECIFICATIONS |
| 208 | Retro Cutter Drill : A Sterile, disposable retro construction guide pin and reamer that allows minimally invasive socket creation from the inside out. The diameter of the instrument should be 3.5mm and it changes from a drill pin to a retrograde reamer by simply pushing a button and sliding the blue housing forward. A Retrograde reaming is done for creating sockets in femur and Tibia in ACL, PCL reconstruction & meniscal root repair. The disposable instrument should be available in sizes 6 mm - 13 mm, in half millimetre increments as a single sterile pack of every different size. |
| 209 | Retro Cutter Drill : A Sterile, disposable retro construction all-in-one guide pin and reamer that allows minimally invasive socket creation from the inside out. The diameter of the instrument should be 3.5mm and it changes from a drill pin to a retrograde reamer by simply rotating the wheel of desired diameter. The implant should have all in one reamer sizes ranging from 6-12mm with 0.5mm increments used in Ligament reconstruction and meniscal root repair for socket creation. |
| 210 | Interference Screw : A sterile, titanium interference screws for arthroscopic or open ligament reconstruction. The screw should have smooth and blunt threads with round head for ease of insertion and prevention of graft laceration. The screw should be available from 7-10mm in diameter with 25,30,35 mm lengths. |
| 211 | Concave ABS button:- A titanium attachable button of 11,14,17,20mm diameter size with mid opening for adjustable loop incorporation and additional holes for facilitation of biologics or graft sutures for cortical suspensory fixation ligament reconstruction. Each button should have a collar in front in order to perfectly fit in tunnel size from 4mm-12mm and concavity on other side of the button would sink the knots on the button to avoid irritation. |
| 212 | Ramp Lasso :- A disposable suture passer with 1.5mm diameter and 25 degree angle tip with right and left combination for the use in meniscal ramp lesion repair. The lasso must contain 100cm long 2-0 UHMWPE suture stick (hardened suture) and should have wheel mechanism for advancing or retracting the suture. |
| 213 | Suture Anchor 1.8mm :- A knotless 1.8mm*19mm all suture anchor for labrum refixation in shoulder instability. The anchor final locking should be by knotless tensionable mechanism by pulling #2 coreless UHMWPE around the tissue and knotless locking and should be able to take both mattress and simple stitch with the same. |
| 214 | All Suture Anchor 2.6mm :- A knotless 2.6mm all suture anchor for rotator cuff repair medial row anchor. The anchor final locking should be by knotless tensionable mechanism by pulling #5 coreless UHMWPE around the tissue and allow knotless locking and should be able to take both mattress and simple stitch with the same. |
| 215 | Multifire Scorpion Needle:- A sterile , disposable needle compatible with reusable shoulder self-retrieving suture passer fastpass mechanism instruments, the width of the needle tip should be 1.5mm and it should engage #2 UHMWPE and tapes with tapered tail of #2 UHMWPE configurations |
| 216 | Locking X-Plate set for hallex valgus osteotomy, Titanium Locking X-Plate for hallux valgus osteotomy,Titanium Locking screw 2.7 mm(Head 2.4 mm)Self Tapping 10-30 mm,Titanium |
| 217 | Lisfranc arthrodesis plates, Titanium 2.7 mm or 3.5 mm diameter locking and non-locking screws, 12 mm to 40 mm. |
| 218 | Ankle arthrodesis plates, Titanium Cortical Screw 4.5 mm, Self-tapping, Length 20 mm to 50 mm Locking Cortical Screw 5 mm, Self-tapping, Length 20 mm to 60 mm Place: Date: Bidder must submit financial bid in .xls (Excel workbook 97-2003 workbook) only Bidders are advised to submit price only for serial No. items i.e. for 1.1, 1.2, …….25.01 only Annexure-III Calculation of Local Content Name of manufacturer Calculation by Manufacturer (Cost per unit of product) Cost Component Cost (Domestic Component) (a) Total Cost (b) Percentage of Local Content c=(a/b)*100 I. …. II. …. III. Total Cost (Excluding tax and duties) 1. Cost (Domestic Component): Cost of domestic component may be calculated based on one of the followings depending on data available. Each of these calculations should provide consistent result. a. Sum of the costs of all inputs which go into the product (including duties and taxes levied on procurement of inputs except those for which credit/ set-off can be taken) and have not been imported directly or through a domestic trader or an intermediary. b. Ex-Factory Price of product minus profit after tax minus sum of imported Bill of Material used (directly or indirectly) as inputs in producing the product (including duties and taxes levied on procurement of inputs except those for which: credit/ set-off can he taken) minus warranty costs. c. Market price minus post-production freight, insurance and other handling costs minus profit after tax minus warranty costs minus sum of Imported Bill of Material used as inputs in producing the product (including duties and taxes levied on procurement of inputs except those for which credit / set-off can be taken) minus sales and marketing expenses. 2. Total Cost: Total cost may be calculated based on one of the following depending on data available. Each of these calculations should provide consistent result. a. Sum of the costs of all inputs which go into the product (including duties and taxes levied on procurement of inputs except those for which credit / set-off can be taken). b. Ex-Factory Price of product minus profit after tax, minus warranty costs. c. Market price minus pent-production freight, insurance and other handling costs minus profit after tax, minus warranty costs minus sales and marketing expenses. Bidder must submit financial bid in .xls (Excel workbook 97-2003 workbook) only |
