Tender For Maintenance Of Rwss To Canacona Taluka. S.H: Customize Design, Supplying, Commissioning Of Electrical Panel For Half Turn Electrical Actuator Butterfly Valves And Multiturn Electrical Actuator For Non Rising Open Channel Slide Gate Of Empi, Margao-Goa
TDR : 54936181
Tender Notice
BOQ
7 Days Left
Margao
Goa
Tender For Maintenance Of Rwss To Canacona Taluka. S.H: Customize Design, Supplying, Commissioning Of Electrical Panel For Half Turn Electrical Actuator Butterfly Valves And Multiturn Electrical Actuator For Non Rising Open Channel Slide Gate Of Empi
Name of Work:- Maintenance of RWSS to Canacona Taluka. S.H: Customize design, supplying, commissioning of Electrical panel for Half turn Electrical actuator Butterfly valves and Multiturn Electrical actuator for non rising open channel slide gate of Empire make.
Sl. No.
Item Description
1
Supplying, Installation, Testing and Commissioning of customize Electrical panel, Powder coated of size as per attached diagram including 3 way switches(5 nos) make: salzer, Technique or equivalent for controlling valves operation, on/off feedback lamps Green (6 nos), Red(6 nos) on panel, interconnection panel wiring with 1.5 Sq.mm copper wire of make polycab or equivalent etc. MCB 6 amp (5 nos) make: Legrand or L&T or equivalent, MCB 10amp (1 no) make: Legrand or L&T or equivalent. The Panel Shall be flush front, floor mounted to allow cable entry from bottom, dust and vermin proof, door and covers fully gasketed. The cubical should be properly derusted and painted powder coating (7 tank process) and oven process. The Panel shall be constructed of 16SWG CRCA sheets and mounted on angle iron frame 25mmx 25mmx 6mm thick. The panel shall be installed on the floor firmly using, anchor fasteners/nut bolt etc. as reqd. and as directed by Engineer-in-Charge.
2
Supplying and Installing following size perforated type 16 SWG M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish in convenient sections joined with connectors suspended from the ceiling with suitable MS suspenders including bolts and nuts painting suspenders etc complete as required.
3
150mm width x 50mm depth
4
Supplying and Installing following size perforated type M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish in convenient sections joined with connectors suspended from the ceiling with suitable MS suspenders including bolts and nuts painting suspenders etc complete as required.
5
150mm width x 50mm depth (16 SWG) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
