Tender For Bill Of Quantity Of Civil Work On Percentage Rate For Annual Rate Contract., Lucknow-Uttar Pradesh

TDR : 54935847

Tender Notice
BOQ

Expired

Lucknow , Uttar Pradesh

Tender Brief : Tender For Bill Of Quantity Of Civil Work On Percentage Rate For Annual Rate Contract.

Document Fees
₹ 11800 /-

EMD
₹ 500000.0 /-

Tender Value
₹ 1 Crore /-

Submission Date
15-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth by work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed Engineer-in- Charge:All kinds of soil DSR Items No. /Non Schedule Items: 2.1.1
2	Earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with % tonne wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift :All kinds of soil DSR Items No. /Non Schedule Items: 2.2.1
3	Earth work in excavation by mechanical means (Hydraulic excavator) manual means in foundation trenches or drains (not exceeding 1.5 m width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil DSR Items No. /Non Schedule Items: 2.8.1
4	Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated and then returning the soil as required, in layers not exceeding 20 cm lead of 50m: depth, including consolidating each deposited layer by ramming, watering, etc.
5	All kinds of soil Pipes, Cables etc. not exceeding 80mm diaDSR Items No. /Non Schedule Items: 2.10.1.1
6	Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm diaDSR Items No. /Non Schedule Items: 2.10.1.2
7	Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mmDSR Items No. /Non Schedule Items: 2.10.1.3
8	Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered).
9	Depth not exceeding 1.5 m DSR Items No. /Non Schedule Items: 2.16.1
10	Depth exceeding 1.5 m but not exceeding 3 mDSR Items No. /Non Schedule Items: 2.16.2
11	Depth exceeding 3 m but not exceeding 4.5 mDSR Items No. /Non Schedule Items: 2.16.3
12	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.DSR Items No. /Non Schedule Items: 2.25
13	Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
14	All kinds of soil DSR Items No. /Non Schedule Items: 2.26.1
15	Ordinary or hard rockDSR Items No. /Non Schedule Items: 2.26.2
16	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.DSR Items No. /Non Schedule Items: 2.27
17	Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m kinds of soil and lift up to 1.5 m. All Kinds of soilDSR Items No. /Non Schedule Items: 2.28
18	Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil DSR Items No. /Non Schedule Items: 2.3
19	Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.DSR Items No. /Non Schedule Items: 2.31
20	Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.DSR Items No. /Non Schedule Items: 2.32
21	Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion)
22	Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentrationDSR Items No. /Non Schedule Items: 2.35.3.1
23	Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentrationDSR Items No. /Non Schedule Items: 2.35.4.1
24	Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.DSR Items No. /Non Schedule Items: 2.35.5
25	Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge.DSR Items No. /Non Schedule Items: 2.36
26	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
27	1:1%:3(1Cement:1% coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR Items No. /Non Schedule Items: 4.1.2
28	1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)DSR Items No. /Non Schedule Items: 4.1.3
29	1:3:6 (1 Cement : 3 coarse sand (zone-lll) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)DSR Items No. /Non Schedule Items: 4.1.6
30	1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)DSR Items No. /Non Schedule Items: 4.1.8
31	1:5:10 (1 cement : 5 coarse sand (zone-lll) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)DSR Items No. /Non Schedule Items: 4.1.10
32	Providing and laying cement concrete in retaining walls, return walls, walls thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:
33	1:1%:3 (1 cement : 1% coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).DSR Items No. /Non Schedule Items: 4.2.2
34	1:3:6 (1 cement : 3 coarse sand (zone-lll) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)DSR Items No. /Non Schedule Items: 4.2.5
35	Centering and shuttering including strutting, propping etc. and removal of form work for :
36	Foundations, footings, bases for columnsDSR Items No. /Non Schedule Items: 4.3.1
37	Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.DSR Items No. /Non Schedule Items: 4.3.2
38	Columns, piers, abutments, pillars, posts and strutsDSR Items No. /Non Schedule Items: 4.3.3
39	Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).DSR Items No. /Non Schedule Items: 4.11
40	Extra for providing and mixing water cement concrete work in doses by weight of cement as per manufacturer’s specification.DSR Items No. /Non Schedule Items: 4.12
41	Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.DSR Items No. /Non Schedule Items: 4.13
42	Making (1 6 well plinth protection 50 mm thick of cement concrete 1:3:6 cement : 3 coarse sand (zone-lll) derived from natural sources : graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.DSR Items No. /Non Schedule Items: 4.17
43	Extra for addition of synthetic Polyester triangular fibre of length 12mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/water retaining structures by using 125 _ per bag of gram of synthetic Polyester triangular fibre for 50 kg cement used as 50 kg of per direction of Engineer-in-Charge.DSR Items No. /Non Schedule Items: 4.18
44	Providing and laying in position ready mixed or site batched design mix cementconcrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in in bear the cost of extra cement.All works upto plinth level :
45	Concrete of M10 grade with minimum cement content of 220 kg /cum DSR Items No. /Non Schedule Items: 4.20.1.1
46	Concrete of M15 grade with minimum cement content of 240 kg /cumDSR Items No. /Non Schedule Items: 4.20.1.2
47	Concrete of M20 grade with minimum cement content of 270 kg /cumDSR Items No. /Non Schedule Items: 4.20.1.3
48	Concrete of M25 grade with minimum cement content of 300 kg /cumDSR Items No. /Non Schedule Items: 4.20.1.4
49	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR Items No. /Non Schedule Items: 5.1.2
50	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, floor piers, five abutments, posts and struts etc. above plinth level up to level, reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR Items No. /Non Schedule Items: 5.2.2
51	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chaijjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).DSR Items No. /Non Schedule Items: 5.3
52	Reinforced cement concrete work in beams, suspended floors, roofs having to to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 20%: 3 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 20%)DSR Items No. /Non Schedule Items: 5.3A
53	Centering and shuttering including strutting, propping etc. and removal of form for
54	Foundations, footings, bases of columns, etc. for mass concrete DSR Items No. /Non Schedule Items: 5.9.1
55	Walls (any thickness) including attached butteresses, plinth and string courses etc.DSR Items No. /Non Schedule Items: 5.9.2
56	Suspended floors, roofs, landings, balconies and access platformDSR Items No. /Non Schedule Items: 5.9.3
57	Lintels, beams, cantilevers plinth beams, girders, bressumers andDSR Items No. /Non Schedule Items: 5.9.5
58	Columns, Pillars, Piers, Abutments, Posts and StrutsDSR Items No. /Non Schedule Items: 5.9.6
59	Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thickDSR Items No. /Non Schedule Items: 5.9.20
60	Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thickDSR Items No. /Non Schedule Items: 5.9.21
61	Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landings, beams and balconies (Plan area to be measured) DSR Items No. /Non Schedule Items: 5.11.1
62	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars DSR Items No. /Non Schedule Items: 5.22.1
63	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Mild steel and Medium Tensile steel bars DSR Items No. /Non Schedule Items: 5.22A.1
64	Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.DSR Items No. /Non Schedule Items: 5.30.1
65	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
66	Concrete of M25 grade with minimum cement DSR Items No. /Non Schedule Items: 5.33.1.1
67	content of 330 kg /cum DSR Items No. /Non Schedule Items: 5.33.1.2
68	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
69	Cement mortar 1:4 (1 cement : 4 coarse sand) DSR Items No. /Non Schedule Items: 6.1.1
70	Cement mortar 1:6 (1 cement : 6 coarse sand)DSR Items No. /Non Schedule Items: 6.1.2
71	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:
72	Cement mortar 1:4 (1 cement : 4 coarse sand) DSR Items No. /Non Schedule Items: 6.4.1
73	Cement mortar 1:6 (1 cement : 6 coarse sand)DSR Items No. /Non Schedule Items: 6.4.2
74	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in
75	Cement mortar 1:3 (1 cement : 3 coarse sand) DSR Items No. /Non Schedule Items: 6.12.1
76	cement mortar 1:4 (1 cement : 4 coarse sand)DSR Items No. /Non Schedule Items: 6.12.2
77	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.:
78	Cement mortar 1:3 (1 cement :3 coarse sand) DSR Items No. /Non Schedule Items: 6.13.1
79	Cement mortar 1:4 (1 cement :4 coarse sand)DSR Items No. /Non Schedule Items: 6.13.2
80	Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :
81	Red sand stoneDSR Items No. /Non Schedule Items: 7.29.1
82	White sand stoneDSR Items No. /Non Schedule Items: 7.29.2
83	Providing and fixing 18mm thick gang saw cut, mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels
84	Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble DSR Items No. /Non Schedule Items: 8.2.1.1
85	Area of slab upto 0.50 sqm DSR Items No. /Non Schedule Items: 8.2.1.2
86	Granite stone slab of colour black, Cherry/Ruby red
87	Area of slab upto 0.50 sqmDSR Items No. /Non Schedule Items: 8.2.2.1
88	Area of slab over 0.50 sqmDSR Items No. /Non Schedule Items: 8.2.2.2
89	Granite stone slab of all colour and texture except black, cherry/ruby red
90	Area of slab upto 0.50sqmDSR Items No. /Non Schedule Items: 8.2.3.1
91	Area of slab over 0.50 sqmDSR Items No. /Non Schedule Items: 8.2.3.2
92	Providing edge moulding to 18 mm thick marble stone counters, Vanities including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
93	Marble work DSR Items No. /Non Schedule Items: 8.3.1
94	Granite work DSR Items No. /Non Schedule Items: 8.3.2
95	Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.DSR Items No. /Non Schedule Items: 8.4.1
96	Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.DSR Items No. /Non Schedule Items: 8.5.1
97	Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.DSR Items No. /Non Schedule Items: 8.6.1
98	Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) Red sand stone - exposed face fine dressed with rough backing.
99	70 mm thick DSR Items No. /Non Schedule Items: 8.14.1.1
100	60 mm thick DSR Items No. /Non Schedule Items: 8.14.1.2
101	50 mm thickDSR Items No. /Non Schedule Items: 8.14.1.3
102	40 mm thickDSR Items No. /Non Schedule Items: 8.14.1.4
103	30 mm thick DSR Items No. /Non Schedule Items: 8.14.1.5
104	Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.DSR Items No. /Non Schedule Items: 8.31.1
105	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
106	Second class teak wood DSR Items No. /Non Schedule Items: 9.1.1
107	Sal wood DSR Items No. /Non Schedule Items: 9.1.2
108	Kiln seasoned and chemically treated hollock wood DSR Items No. /Non Schedule Items: 9.1.3
109	Extra for additional labour for circular works, such as in frames of fan light
110	Second class teak wood DSR Items No. /Non Schedule Items: 9.4.1
111	Sal wood DSR Items No. /Non Schedule Items: 9.4.2
112	Kiln seasoned and chemically treated hollock wood DSR Items No. /Non Schedule Items: 9.4.3
113	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately)
114	Second class teak wood DSR Items No. /Non Schedule Items: 9.5.1.1
115	35 mm thick shutters DSR Items No. /Non Schedule Items: 9.5.1.2
116	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.
117	Float glass panes4mm thick glass pane (weight not less than 10 kg/sqm). DSR Items No. /Non Schedule Items: 9.7.7.1
118	5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).DSR Items No. /Non Schedule Items: 9.7.7.2
119	Fly proof stainless steel grade 304 wire gauge with 0.5 mm 1.4 and 9.9 mm wide aperture with matching wood beadingDSR Items No. /Non Schedule Items: 9.7.8
120	Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.
121	Second class teak wood Second 35mm thickDSR Items No. /Non Schedule Items: 9.9.1.1
122	30 mm thickDSR Items No. /Non Schedule Items: 9.9.1.2
123	Extra for providing frosted glass panes 4 mm thick (weight not less than 10 per sqm) instead of ordinary float glass panes 4 mm thick (weight less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).DSR Items No. /Non Schedule Items: 9.12.1
124	Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured).DSR Items No. /Non Schedule Items: 9.14.1
125	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
126	35 mm thick including ISI marked stainless steel butt hinges with necessary screws DSR Items No. /Non Schedule Items: 9.20.1
127	30 mm thick including ISI marked stainless steel butt hinges with necessary screws DSR Items No. /Non Schedule Items: 9.20.2
128	25 mm thick including ISI marked stainless steel butt hinges with necessary screws DSR Items No. /Non Schedule Items: 9.20.3
129	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screwsDSR Items No. /Non Schedule Items: 9.21.3
130	Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to 2202 (Part I) on one side only DSR Items No. /Non Schedule Items: 9.22.1
131	Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured DSR Items No. /Non Schedule Items: 9.26.1
132	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding DSR Items No. /Non Schedule Items: 9.48.1
133	Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.
134	With second class teak wood beading 62X19 mm DSR Items No. /Non Schedule Items: 9.51.1
135	With 12 mm mild steel U beadingDSR Items No. /Non Schedule Items: 9.51.2
136	Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).DSR Items No. /Non Schedule Items: 9.53
137	Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete :
138	125x90x4.00 mm DSR Items No. /Non Schedule Items: 9.56.1
139	100x75x3.50mmDSR Items No. /Non Schedule Items: 9.56.2
140	Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) 125 mm DSR Items No. /Non Schedule Items: 9.59.2
141	Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378)
142	300x16mmDSR Items No. /Non Schedule Items: 9.62.1
143	250x16mmDSR Items No. /Non Schedule Items: 9.62.2
144	Providing and fixing ISI marked oxidised M.S. handles conforming to 1S:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378)
145	125mmDSR Items No. /Non Schedule Items: 9.66.1
146	100mmDSR Items No. /Non Schedule Items: 9.66.2
147	75mmDSR Items No. /Non Schedule Items: 9.66.3
148	Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete
149	125x64x2.50mmDSR Items No. /Non Schedule Items: 9.71.1
150	100x60x2.50mmDSR Items No. /Non Schedule Items: 9.71.2
151	75x50x2.50mmDSR Items No. /Non Schedule Items: 9.71.3
152	Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.DSR Items No. /Non Schedule Items: 9.83.1
153	Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete.DSR Items No. /Non Schedule Items: 9.85.1
154	Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.DSR Items No. /Non Schedule Items: 9.88.1
155	Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.DSR Items No. /Non Schedule Items: 9.89.1
156	Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.
157	Size 40mmDSR Items No. /Non Schedule Items: 9.90.1
158	Size 50mmDSR Items No. /Non Schedule Items: 9.90.2
159	Size 65mmDSR Items No. /Non Schedule Items: 9.90.3
160	Size 75mmDSR Items No. /Non Schedule Items: 9.90.4
161	Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete.DSR Items No. /Non Schedule Items: 9.91.1
162	Providing and fixing chromium plated brass handles with necessary screws etc. complete:
163	125mmDSR Items No. /Non Schedule Items: 9.92.1
164	100mmDSR Items No. /Non Schedule Items: 9.92.2
165	75mmDSR Items No. /Non Schedule Items: 9.92.3
166	Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
167	125x75x4mmDSR Items No. /Non Schedule Items: 9.95.1
168	100x63x4mmDSR Items No. /Non Schedule Items: 9.95.3
169	75x63x3.2mmDSR Items No. /Non Schedule Items: 9.95.7
170	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete
171	300x16mmDSR Items No. /Non Schedule Items: 9.96.1
172	250x16mmDSR Items No. /Non Schedule Items: 9.96.2
173	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete
174	300x10mmDSR Items No. /Non Schedule Items: 9.97.1
175	250x10mmDSR Items No. /Non Schedule Items: 9.97.2
176	200x10mmDSR Items No. /Non Schedule Items: 9.97.3
177	150x10mmDSR Items No. /Non Schedule Items: 9.97.4
178	100x10mmDSR Items No. /Non Schedule Items: 9.97.5
179	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete
180	125mmDSR Items No. /Non Schedule Items: 9.100.1
181	100mmDSR Items No. /Non Schedule Items: 9.100.2
182	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
183	Single rubber stopperDSR Items No. /Non Schedule Items: 9.101.1
184	Twin rubber stopper DSR Items No. /Non Schedule Items: 9.101.2
185	Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge.DSR Items No. /Non Schedule Items: 9.119.1
186	Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.
187	30mm thick plain PVC door shuttersDSR Items No. /Non Schedule Items: 9.120.1
188	30mm thick pre laminated PVC door shutters DSR Items No. /Non Schedule Items: 9.120.2
189	Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.DSR Items No. /Non Schedule Items: 9.121.1
190	Providing and fixing factory made door frame (single rebate) made out of solid foam PVC extruded profile of minimum 60 mm width and minimum 30 mm thickness, having homogenous fine cellular structure and integral smooth outer skin. The frame’s vertical and horizontal members to be mitered cut and joined together with PVC solvent adhesive / cement and both corners strengthened with fully threaded steel screws (of required size) fixed diagonally. The door frame is to be fixed to door jambs using 6 Nos. SS 304 grade minimum 8 mm dia CSK Phillips stainless steel self tapping screws/fasteners with PA6 grade polyamide sleeves both of required size, and gap if any between the door frame and the jamb must be filled with clear silicon, complete as per direction of the Engineer-in-Charge.DSR Items No. /Non Schedule Items: 9.123
191	Providing and fixing factory made PVC door shutter made of solid foam PVC profiles of thikness 5 mm and 15 mm at edges integrally extruded for vertical style and horizontal (top/ bottom/ lock) rails of minimum cross section of 7Ommx 28mm, of shape and design as per manufacturer’s specifications having homogenous fine cellular structure and smooth integral outer skin, inserted with G.I. ‘C’ section/ rectangular tube profile of minimum 0.30 mm thickness with 120 gsm coating as stiffeners as per manufacturer’s specifications Mitred cut joints for styles and rails provided with telescopic polymeric ‘L’ corners are jointed together using solvent adhesive and strenghtened with fully threaded stainless steel screws (of required size) through reinforced stiffener with paneling of specified solid foam PVC board/ high pressure laminate of required thickness and of approved design and shade (matching the styles and rails), secured within styles and rails with specially designed solid foam PVC moulded beadings of required size using PVC solvent adhesive/ cement. The finished door shutter including SS hardware, 1 no. ss sliding bolt 200 x 10mm, 1 no. SS tower bolt 200 x 10 mm and 2 nos. SS handles 125mm, shall be fixed to frame with 3 nos. stainless steel hinges of minimum size 100x58x1.9 mm and stainless steel screws of required size complete as per direction of the Engineer-in-Charge. (Cost of above hardware is inclusive in rates)DSR Items No. /Non Schedule Items: 9.124.1
192	Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square5 mm thick solid foam PVC panel of required size with moulded/ extrudedbeading of appropriate design shape and size as per manufacturer’sspecifications ( to secure the panel insert tight in place within the styleand rails of shutter) matching the colour and shade of shutter frame.Non decorative type. DSR Items No. /Non Schedule Items: 9.24.1
193	Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws 35 mm thick shutters ith ISI marked M.S. pressed butt hingesbright finished of required size second class teak woodDSR Items No. /Non Schedule Items: 9.134.1.1.1
194	Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.With 2nd class teak wood beading 62X19 mm DSR Items No. /Non Schedule Items: 9.135.1
195	35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (+ 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer’s specification and direction of Engineer-in-charge.Non decorative finish (matt finish)DSR Items No. /Non Schedule Items: 9.142.1
196	Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (+ 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (+0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer’s specification and direction of Engineer-in-charge.DSR Items No. /Non Schedule Items: 9.143.1
197	Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (+ 0.2 mm). Both vertical sides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (+ 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer’s specification and direction of engineer- in-charge.DSR Items No. /Non Schedule Items: 9.145.1
198	Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds
199	Two track four panels sliding windows with Aluminium channel for roller track, wool pile, zinc alloy (Zamak) powder coated handle on three panels along with multi-point locking system, nylon rollers with SS 304 body.sing R3 series with frame (55 mm & above)x (40 mm & above) & sash (30 mm & above) x(55 mm & above) (Height upto 1.8m). DSR Items No. /Non Schedule Items: 9.147.A2.1
200	Using R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm & above) x (55 mm & above) (Height above 1.8m).DSR Items No. /Non Schedule Items: 9.147.A2.2
201	Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides.
202	Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) (Height upto 2.5 metre).DSR Items No. /Non Schedule Items: 9.147.F1.1
203	Using R4 series with frame (64 mm & above) x (55 mm & above) & sash (64 mm & above) x (100 mm & above). (Height above 2.5 metre).DSR Items No. /Non Schedule Items: 9.147.F1.2
204	Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.DSR Items No. /Non Schedule Items: 10.3.1
205	Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
206	Using M.S. angels 40x40x6 mm for diagonal braces DSR Items No. /Non Schedule Items: 10.5.1
207	Using flats 30x6 mm for diagonal braces and central cross piece DSR Items No. /Non Schedule Items: 10.5.2
208	Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) DSR Items No. /Non Schedule Items: 10.15.1
209	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
210	Hot finished welded type tubes DSR Items No. /Non Schedule Items: 10.16.1
211	Hot finished seamless type tubesDSR Items No. /Non Schedule Items: 10.16.2
212	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
213	In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete DSR Items No. /Non Schedule Items: 10.25.1
214	In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksDSR Items No. /Non Schedule Items: 10.25.2
215	Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tubeDSR Items No. /Non Schedule Items: 10.26.1
216	Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.
217	10 x60 mmDSR Items No. /Non Schedule Items: 10.27.1
218	10 x 80 mmDSR Items No. /Non Schedule Items: 10.27.2
219	10 x 120 mmDSR Items No. /Non Schedule Items: 10.27.3
220	10 x 140 mmDSR Items No. /Non Schedule Items: 10.27.4
221	10 x 160 mmDSR Items No. /Non Schedule Items: 10.27.5
222	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).DSR Items No. /Non Schedule Items: 10.28
223	Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.
224	Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides DSR Items No. /Non Schedule Items: 10.29.1
225	Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sidesDSR Items No. /Non Schedule Items: 10.29.2
226	Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :
227	4.0 mm thick glass panesDSR Items No. /Non Schedule Items: 10.30.1
228	5.5 mm thick glass panesDSR Items No. /Non Schedule Items: 10.30.2
229	Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.DSR Items No. /Non Schedule Items: 10.31.1
230	Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
231	Light shade pigment using white cementDSR Items No. /Non Schedule Items: 11.20.1
232	Medium shade pigment using 50% white cement 50% Grey cementDSR Items No. /Non Schedule Items: 11.20.2
233	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate DSR Items No. /Non Schedule Items: 11.3.1
234	52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.DSR Items No. /Non Schedule Items: 11.4.1
235	Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.18mm thick DSR Items No. /Non Schedule Items: 11.6.1
236	Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25mm thick DSR Items No. /Non Schedule Items: 11.26.1
237	Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.DSR Items No. /Non Schedule Items: 11.27.1
238	Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.DSR Items No. /Non Schedule Items: 11.4
239	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
240	Size of Tile 500x500 mm DSR Items No. /Non Schedule Items: 11.41.1
241	Size of Tile 600x600 mmDSR Items No. /Non Schedule Items: 11.41.2
242	Size of Tile 800x600 mmDSR Items No. /Non Schedule Items: 11.41.3
243	Size of Tile 1000x600 mmDSR Items No. /Non Schedule Items: 11.41.4
244	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
245	Double charge vitrified tile polished finish of size 600x600mmDSR Items No. /Non Schedule Items: 11.41A.1.1
246	Size of Tile 600 x 1200 mmDSR Items No. /Non Schedule Items: 11.41A.1.3
247	Glazed Vitrified tiles Matt/Antiskid finish of size 600x600mmDSR Items No. /Non Schedule Items: 11.41A.3.1
248	Providing and laying Vitrified tiles in different sizes (thickness to bespecified by the manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of approved brand & manufacturer, in allcolours and shade, in skirting, riser of steps, laid with cement based highpolymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, including grouting of joints (Paymentfor grouting of joints to be made separately). Size of Tile 600x600 mmDSR Items No. /Non Schedule Items: 11.47.2
249	Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm DSR Items No. /Non Schedule Items: 11.49.2
250	Providing and laying full body vitrified tile in floor of minimum thickness 15 mm with water absorption less than 0.06% and conforming to 1S:15622, of approved make, brand and manufacturer, laid on 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.30 kg / sqm including grouting the joints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond cutter only. Laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vacuum cups for lifting, leveling system and rubber mallet for placing the slab gently and easily. Size of tile 800x2400 mm of all colours and shades.DSR Items No. /Non Schedule Items: 11.49A.1
251	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab of colour Black, Cherry/RubyRed or equivalent DSR Items No. /Non Schedule Items: 11.56.1
252	Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :75x75mm deep chaseDSR Items No. /Non Schedule Items: 12.21.1
253	Making khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.DSR Items No. /Non Schedule Items: 12.22.1
254	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
255	75mm diameter DSR Items No. /Non Schedule Items: 12.41.1
256	110mm diameterDSR Items No. /Non Schedule Items: 12.41.2
257	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.DSR Items No. /Non Schedule Items: 12.5
258	Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
259	GI Metal Ceiling Lay in plain Tegular edge Global whitecolor tiles of size 595x595 mm, and 0.5 mm thick with 8 mmdrop; made of G \| sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. DSR Items No. /Non Schedule Items: 12.52.1
260	GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber acoustical fleece.DSR Items No. /Non Schedule Items: 12.52.2
261	12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part \| and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.DSR Items No. /Non Schedule Items: 12.52.3
262	12 mm cement plaster of mix :
263	1:4 (1 cement: 4 coarse sand)DSR Items No. /Non Schedule Items: 13.4.1
264	1:6 (1 cement:6 coarse sand)DSR Items No. /Non Schedule Items: 13.4.2
265	15 mm cement plaster on rough side of single or half brick wall of mix:
266	1:4 (1 cement: 4 coarse sand)DSR Items No. /Non Schedule Items: 13.5.1
267	1:6 (1 cement: 6 coarse sand)DSR Items No. /Non Schedule Items: 13.5.2
268	Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement
269	12 mm cement plasterDSR Items No. /Non Schedule Items: 13.9.1
270	20 mm cement plasterDSR Items No. /Non Schedule Items: 13.9.2
271	18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.DSR Items No. /Non Schedule Items: 13.12
272	Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.DSR Items No. /Non Schedule Items: 13.21.1
273	Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereofDSR Items No. /Non Schedule Items: 13.22.1
274	White washing with lime to give an even shade : New work (three or moreDSR Items No. /Non Schedule Items: 13.37.1
275	Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colourNew work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litreDSR Items No. /Non Schedule Items: 13.41.1
276	Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqmDSR Items No. /Non Schedule Items: 13.44.1
277	Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)DSR Items No. /Non Schedule Items: 13.46.1
278	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufactureDSR Items No. /Non Schedule Items: 13.62.1
279	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth completeDSR Items No. /Non Schedule Items: 13.8
280	Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colourOld work (one or more coats)DSR Items No. /Non Schedule Items: 13.81
281	Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour
282	One coatDSR Items No. /Non Schedule Items: 13.82.1
283	Two coats DSR Items No. /Non Schedule Items: 13.82.2
284	Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour
285	One coatDSR Items No. /Non Schedule Items: 13.83.1
286	Two coats DSR Items No. /Non Schedule Items: 13.83.2
287	Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content
288	With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litreDSR Items No. /Non Schedule Items: 13.85.1
289	With water thinnable cement primer on wall surface having VOC content less than 50 grams/litreDSR Items No. /Non Schedule Items: 13.85.3
290	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. completeDSR Items No. /Non Schedule Items: 13.91
291	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old workDSR Items No. /Non Schedule Items: 13.99
292	Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade
293	Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surfaceDSR Items No. /Non Schedule Items: 13.112.1
294	Old work (one or more coats applied @ 0.83 ltr/10 sqm).DSR Items No. /Non Schedule Items: 13.112.2
295	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge
296	With cement mortar 1:4 (1 cement : 4 fine sand)DSR Items No. /Non Schedule Items: 14.1.1
297	With cement mortar 1:4 (1cement: 4 coarse sand)DSR Items No. /Non Schedule Items: 14.1.2
298	Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface including disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. For door/ window/ clerestory windowDSR Items No. /Non Schedule Items: 14.4.1
299	Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
300	Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)DSR Items No. /Non Schedule Items: 14.5.1
301	Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm)DSR Items No. /Non Schedule Items: 14.5.2
302	Renewal of old putty of glass panes (length)DSR Items No. /Non Schedule Items: 14.9.1
303	Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps completeDSR Items No. /Non Schedule Items: 14.12.1
304	Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-ChargeDSR Items No. /Non Schedule Items: 14.17.1
305	Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness completeDSR Items No. /Non Schedule Items: 14.34
306	Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffoldingNote: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be doneDSR Items No. /Non Schedule Items: 14.72.1
307	Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineerin-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)DSR Items No. /Non Schedule Items: 14.75A.1
308	Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia upto 300 mmDSR Items No. /Non Schedule Items: 14.77.1
309	Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operationsTank shall be emptied of water by pumping & bottom shall be cleaned ofsilt and other deposits.(ii) Entire surface area of the sump shall then scrubbed thoroughly withwire brush etc. and pressure washed with water.(iii) Chlorination of RCC internal surface by liquid chlorine.(iv) The treated surface shall be dried using air jetting and all loose particlesshall be removal from the surface.(v) Finally the surface shall be treated with ultraviolet radiation etc. as perdirection of Engineer-in-Charge.DSR Items No. /Non Schedule Items: 14.78.1
310	Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-chargeDSR Items No. /Non Schedule Items: 14.79.1
311	Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge.DSR Items No. /Non Schedule Items: 14.82
312	Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-chargeDSR Items No. /Non Schedule Items: 14.85.1
313	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge
314	Nominal concrete 1:3:6 or richer mix (including equivalentDSR Items No. /Non Schedule Items: 15.2.1
315	Nominal concrete 1:4:8 of leaner mix (including equivalent design mix)DSR Items No. /Non Schedule Items: 15.2.2
316	Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.DSR Items No. /Non Schedule Items: 15.3.1
317	Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- chargeDSR Items No. /Non Schedule Items: 15.4.1
318	Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-chargeDSR Items No. /Non Schedule Items: 15.5.1
319	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortarDSR Items No. /Non Schedule Items: 15.7.4
320	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead
321	Of area 3 sq. metres and belowDSR Items No. /Non Schedule Items: 15.12.1
322	Of area beyond 3 sq. metresDSR Items No. /Non Schedule Items: 15.12.2
323	Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :
324	Of area 3 sq. metres and belowDSR Items No. /Non Schedule Items: 15.13.1
325	Of area beyond 3 sq. metresDSR Items No. /Non Schedule Items: 15.13.2
326	Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres leadDSR Items No. /Non Schedule Items: 15.18
327	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
328	For thickness of tiles 10 mm to 25 mmDSR Items No. /Non Schedule Items: 15.23.1
329	For thickness of tiles above 25 mm and up to 40 mmDSR Items No. /Non Schedule Items: 15.23.2
330	Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres leadDSR Items No. /Non Schedule Items: 15.25.1
331	Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.DSR Items No. /Non Schedule Items: 15.26.1
332	Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge
333	15 mm to 40 mm nominal boreDSR Items No. /Non Schedule Items: 15.44.1
334	Above 40 mm nominal boreDSR Items No. /Non Schedule Items: 15.44.2
335	Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge
336	Up to 150 mm diameterDSR Items No. /Non Schedule Items: 15.45.1
337	Above 150 mm dia up to 300 mm diaDSR Items No. /Non Schedule Items: 15.45.2
338	Above 300 mm diameterDSR Items No. /Non Schedule Items: 15.45.3
339	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres leadDSR Items No. /Non Schedule Items: 15.56
340	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.DSR Items No. /Non Schedule Items: 15.6
341	Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metresDSR Items No. /Non Schedule Items: 16.1.1
342	Laying water bound macadam sub-base with brick aggregate and binding material, earth etc. including screening, sorting and spreading to template and consolidation with light power road-roller etc. complete.(payment for brick aggregate and moorum etc. to be made separately)
343	Over burnt (Jhama) brick aggregate 120 mm to 40 mmDSR Items No. /Non Schedule Items: 16.5.1
344	Over burnt (Jhama) brick aggregate 90 mm to 45 mmDSR Items No. /Non Schedule Items: 16.5.2
345	Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineerin-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately)Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ lesscement used as per design mix is payable/ recoverable separately Cement concrete prepared with batch mixing machineDSR Items No. /Non Schedule Items: 16.43.1
346	Cement concrete manufactured in automatic batching plant (RMC plant) including transportation to site in transit mixerDSR Items No. /Non Schedule Items: 16.43.2
347	Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge. Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-ChargeDSR Items No. /Non Schedule Items: 16.46.1
348	Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc.
349	complete New work (Two or more coats)DSR Items No. /Non Schedule Items: 16.47.1
350	Old work (One or more coats)DSR Items No. /Non Schedule Items: 16.47.2
351	Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)DSR Items No. /Non Schedule Items: 16.53.1
352	Excavating holes upto 0.10 cum, including getting out the excavated soil, then returning the soil as deported in layers not exceeding 20 cm in depth, including consolidating and deposited layer by ramming watering etc., disposing of surplus excavated soil as directed with in a lead of 50 mm and lift upto 1.5 m. All kind of soilDSR Items No. /Non Schedule Items: 16.66.1
353	Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineerin-ChargeWith material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25DSR Items No. /Non Schedule Items: 16.78.2
354	Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.DSR Items No. /Non Schedule Items: 16.83.1
355	Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost).DSR Items No. /Non Schedule Items: 16.84
356	Providing and laying matt finished vitrified tile of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.DSR Items No. /Non Schedule Items: 16.89.1
357	Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge
358	60 mm thick cement concrete paver block of M-35 grade with approved colour, design & patternDSR Items No. /Non Schedule Items: 16.91.1
359	80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.DSR Items No. /Non Schedule Items: 16.91.2
360	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot restsDSR Items No. /Non Schedule Items: 17.1.1
361	Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requiredW.C. pan with ISI marked white solid plastic seat and lidDSR Items No. /Non Schedule Items: 17.3.1
362	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cisternDSR Items No. /Non Schedule Items: 17.4.1
363	Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cisternDSR Items No. /Non Schedule Items: 17.5.1
364	Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required :Single squatting plate with 5 litre P.V.C. automatic flushing cistern DSR Items No. /Non Schedule Items: 17.6.1
365	Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CPBrass single hole basin mixerDSR Items No. /Non Schedule Items: 17.7A.1
366	Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittingsDSR Items No. /Non Schedule Items: 17.8.1
367	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
368	Kitchen sink with drain board 510x1040 mm bowl depth 250 mmDSR Items No. /Non Schedule Items: 17.10.1
369	Kitchen sink without drain board 610x510 mm bowl depth 200 mmDSR Items No. /Non Schedule Items: 17.10.2
370	Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :
371	Size 450x300x150 mmDSR Items No. /Non Schedule Items: 17.11.1
372	Size 600x450x200 mmDSR Items No. /Non Schedule Items: 17.11.2
373	Providing and fixing white vitreous china water closet squatting pan (Indian type) :
374	Long pattern W.C. pan of size 580 mmDSR Items No. /Non Schedule Items: 17.13.1
375	Orissa pattern W.C. pan of size 580x440 mmDSR Items No. /Non Schedule Items: 17.13.2
376	Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
377	10 litre capacity - WhiteDSR Items No. /Non Schedule Items: 17.18.1
378	10 litre capacity - colouredDSR Items No. /Non Schedule Items: 17.18.2
379	Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.
380	10 litre (full flush) capacity-whiteDSR Items No. /Non Schedule Items: 17.19.1
381	10 litre (full flush) capacity-colouredDSR Items No. /Non Schedule Items: 17.19.2
382	Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lidDSR Items No. /Non Schedule Items: 17.20.1
383	Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.DSR Items No. /Non Schedule Items: 17.22A.1
384	Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal diaDSR Items No. /Non Schedule Items: 17.22B
385	Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings :
386	Size 450x300x150 mmDSR Items No. /Non Schedule Items: 17.27.1
387	Size 600x450x200 mmDSR Items No. /Non Schedule Items: 17.27.2
388	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
389	Semi rigid pipe 32mm diaDSR Items No. /Non Schedule Items: 17.28.1.1
390	40mm dia DSR Items No. /Non Schedule Items: 17.28.1.2
391	Flexible pipe 32 mm diaDSR Items No. /Non Schedule Items: 17.28.2.1
392	40mm dia DSR Items No. /Non Schedule Items: 17.28.2.2
393	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.DSR Items No. /Non Schedule Items: 17.31.1
394	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mmDSR Items No. /Non Schedule Items: 17.32.4
395	Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., completeDSR Items No. /Non Schedule Items: 17.33.1
396	Providing and fixing toilet paper holder : C.P. brassDSR Items No. /Non Schedule Items: 17.34.1
397	Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :
398	For 100 mm dia pipeDSR Items No. /Non Schedule Items: 17.37.1
399	For 75 mm dia pipeDSR Items No. /Non Schedule Items: 17.37.2
400	Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors
401	100 mm inlet and 100 mm outlet DSR Items No. /Non Schedule Items: 17.60.1.1
402	Sand cast iron S&S as per IS: 3989DSR Items No. /Non Schedule Items: 17.60.1.2
403	Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :
404	100 mm diaDSR Items No. /Non Schedule Items: 17.61.1.1
405	75mm dia DSR Items No. /Non Schedule Items: 17.61.1.2
406	50mm diaDSR Items No. /Non Schedule Items: 17.61.1.3
407	Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bendDSR Items No. /Non Schedule Items: 17.68.1
408	Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.DSR Items No. /Non Schedule Items: 17.73.2
409	Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2” BSP thread and shapes, weighing not less than 60 gms.DSR Items No. /Non Schedule Items: 17.75
410	Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc completeDSR Items No. /Non Schedule Items: 17.78
411	Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-chargeDSR Items No. /Non Schedule Items: 17.8
412	Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.DSR Items No. /Non Schedule Items: 17.81
413	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
414	Internal work - Exposed on wall 15 mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.7.1
415	20mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.7.2
416	25 mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.7.3
417	32mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.7.4
418	40mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.7.5
419	50 mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.7.6
420	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
421	15 mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.8.1
422	20mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.8.2
423	25 mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.8.3
424	32mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.8.4
425	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. Ext
426	ernal work 15 mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.9.1
427	20 mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.9.2
428	25mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.9.3
429	32 mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.9.4
430	40 mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.9.5
431	50 mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.9.6
432	65mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.9.7
433	80mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.9.8
434	100mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.9.9
435	150 mm nominal dia PipesDSR Items No. /Non Schedule Items: 18.9.10
436	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall
437	15 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.10.1
438	20 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.10.2
439	25 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.10.3
440	32 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.10.4
441	40 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.10.5
442	50 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.10.6
443	Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :
444	15 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.11.1
445	20 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.11.2
446	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work
447	15 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.12.1
448	20 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.12.2
449	25 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.12.3
450	32 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.12.4
451	40 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.12.5
452	50 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.12.6
453	65 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.12.7
454	80 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.12.8
455	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
456	25 mm nominal boreDSR Items No. /Non Schedule Items: 18.17.1
457	20 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.17.1A
458	32 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.17.2
459	40 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.17.3
460	50 mm dia nominal boreDSR Items No. /Non Schedule Items: 18.17.4
461	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15
462	mm nominal boreDSR Items No. /Non Schedule Items: 18.18.1
463	20mm nominal bore DSR Items No. /Non Schedule Items: 18.18.2
464	25mm nominal boreDSR Items No. /Non Schedule Items: 18.18.3
465	Providing and fixing gun metal non- return valve of approved quality (screwed end) :
466	25 mm nominal bore Horizontal DSR Items No. /Non Schedule Items: 18.19.1.1
467	Vertical DSR Items No. /Non Schedule Items: 18.19.1.2
468	32 mm nominal bore 18.19.2.1 HorizontalDSR Items No. /Non Schedule Items: 18.19.2.1
469	VerticalDSR Items No. /Non Schedule Items: 18.19.2.2
470	40 mm nominal bore HorizontalDSR Items No. /Non Schedule Items: 18.19.3.1
471	VerticalDSR Items No. /Non Schedule Items: 18.19.3.2
472	50 mm nominal bore HorizontalDSR Items No. /Non Schedule Items: 18.19.4.1
473	VerticalDSR Items No. /Non Schedule Items: 18.19.4.2
474	65 mm nominal bore HorizontalDSR Items No. /Non Schedule Items: 18.19.5.1
475	VerticalDSR Items No. /Non Schedule Items: 18.19.5.2
476	80 mm nominal bore HorizontalDSR Items No. /Non Schedule Items: 18.19.6.1
477	VerticalDSR Items No. /Non Schedule Items: 18.19.6.2
478	Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :
479	15 mm nominal boreDSR Items No. /Non Schedule Items: 18.20.1
480	20mm nominal bore DSR Items No. /Non Schedule Items: 18.20.2
481	25mm nominal boreDSR Items No. /Non Schedule Items: 18.20.3
482	Providing and fixing uplasticised PVC connection pipe with brass unions :
483	45 cm length 15 mm nominal boreDSR Items No. /Non Schedule Items: 18.21.2.1
484	20mm nominal bore DSR Items No. /Non Schedule Items: 18.21.2.2
485	Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
486	100 mm diameterDSR Items No. /Non Schedule Items: 18.22.1
487	150mm diameterDSR Items No. /Non Schedule Items: 18.22.2
488	Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS :1536 : 100 mm dia pipeDSR Items No. /Non Schedule Items: 18.27.1
489	Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead :
490	100 mm diameter pipDSR Items No. /Non Schedule Items: 18.28.1
491	150 mm diameter pipeDSR Items No. /Non Schedule Items: 18.28.3
492	Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately)
493	100 mm diameter Class IIDSR Items No. /Non Schedule Items: 18.31.1.2
494	125mm diameter Class IIDSR Items No. /Non Schedule Items: 18.31.2.2
495	150mm diameter Class IIDSR Items No. /Non Schedule Items: 18.31.3.2
496	200 mm diameter Class IIDSR Items No. /Non Schedule Items: 18.31.4.2
497	250mm diameter Class IIDSR Items No. /Non Schedule Items: 18.31.5.2
498	300mm diameter Class IIDSR Items No. /Non Schedule Items: 18.31.6.2
499	Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5DSR Items No. /Non Schedule Items: 18.32.1
500	Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5DSR Items No. /Non Schedule Items: 18.33.1

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Uttar Pradesh Tenders

Construction Tenders

Civil Construction Tenders

Civil Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Bill Of Quantity Of Civil Work On Percentage Rate For Annual Rate Contract., Lucknow-Uttar Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Bill Of Quantity Of Civil Work On Percentage Rate For Annual Rate Contract., Lucknow-Uttar Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us