|
| 1 | NS Item |
| 2 | Dismantle and credit of dismantled old and damaged90 W LED street light fitting including dismantling fromexisting STP/ octagonal pole up to 9 Mtr long. |
| 3 | Dismantle and credit of dismantled old double armBracket including dismantling from existing STP/octagonal pole up to 9 Mtr long. |
| 4 | Maintanace of LED street light points 90W to 200Winstalled on 9Mtr Octagonal Pole and 12.5Mtr Long High Mast Pole including all the labours, TandP and petty materials i.e. PVC Tape, Screws, Wires etc. required to complete the work upto the entire satisfaction of E-I-C of the work. The rates are including ON/OFF operation of street light system. |
| 5 | Supply and erection of double overhang GalvanizedIron Bracket having 125 mm dia B class canopy 0.6 mtr long and arm of length 1.5 mtr on each side made out of 50 mm dia B class GI Pipe making an angle of 15 degree with horizontal plane and bracing of 1.35 mtr long made out of 25 mm dia GI Pipe. The Bracket should be suitable for fixing of LED Street Light Fittings on 8 Mtr to 10 Mtr long octagonal poles. The cost is inclusive of all the labour and material required to complete the work up to the entire satisfaction of E-I-C of the work and as per drawing. |
| 6 | Timer Switch |
| 7 | S/E of FRLS PVC insulated and round sheathed 2.5Sqmm x 3 core, bright annealed copper conductor heavy duty industrial flexible cable for voltage grade 1100 volts confirming to IS: 694-2010 complete in all respect up to entire satisfaction of the Engineer-in-Charge of the work. Make: Grandlay/Polycab/Havells. |
| 8 | 120 Watt LED street light fittings |
| 9 | 200 watt LED Flood light fittings |
| 10 | S/E of 63 Amps connection plate for incoming andoutgoing cabling in existing Panel/High Mast/pole/bracket/pipeto be fitted with connector fixed on Bakelite sheet complete with nut and bolts. |
| 11 | HSR Item |
| 12 | 23.22.5.2-MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.2. Supply and erection of miniature circuit Breaker 240/415 V in the existingdistribution board including making necessary connections:- 40 amp to 63 amp. Single Pole |
| 13 | 24.9.1-RCC FOUNDATIONS FOR HIGH MAST OCTAGONAL POLES 1. Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 75 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for high mast octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 12.5 m high mast pole |
| 14 | 23.22.5.1-MCCB ,DISTRIBUTION BOARDS,MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply anderection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole |
| 15 | 24.1.8-EARTHING AND LIGHTENING ARRESTOR8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. |
| 16 | 23.22.1.5-MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.5. Supply anderection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-incharge of the work. TRIPLE POLE MCCB 200 to 250 Amp, 25 KA |
| 17 | 23.24.3.2-MS STAND, BUS BAR CHAMBER ANDPANELS 3.2. Supply and erection of metal clad bus barchamber made from 1.6 mm thick M.S. sheet and fixing with rag bolts on wall or on existing pedestal/angle iron frame including bonding, detachable top and bottom including painting and necessary connection etc. (Aluminium bars). 100 amp 4 bars of 55 cm each (cross section 25 mm x6 mm) chamber over all size 60 cm x 45 cm x 18cm |
| 18 | 24.1.1-EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. |
| 19 | 24.1.2-EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earthelectrode as required. |
| 20 | 24.5.2.3-MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia |
| 21 | 24.4.11.4-STREET LIGHT 11.4. Erection of MS/GI/Swaged ( excluding Octagonal ) metallic pole offollowing length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 8.0 metre and up to 11.0 metre |
| 22 | 24.13.31-LT CABLES (Aluminium Conductor,Armoured and Unarmoured) PROVIDING& ERECTION/LAYING OF PVC/ XLPE INSULATED UNDERGROUNDALUMINIUM CONDUCTOR UNDERGROUND CABLELOOSE IN EXISTING PIPE OR TRENCHES COMPLETE INALL RESPECT WITH NECESSARY CONNECTION UPTOTHE ENTIRE SATISFACTION OF ENGINEER IN CHARGEOF THE WORK 31. 25 Sq mm 4 core (UnArm.) |
| 23 | 24.8.7-RCC FOUNDATIONS FOR OCTAGONAL POLES 7. Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 9m high pole |
| 24 | 23.27.3-Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle ironframe with 3.00 mm thick M.S. sheet covering includingshutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 3. M.S. pedestal of size 750 mm wide , 1200 mm high ,300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level , having a base of size 1050 mm x 600 mm x 250 mm below ground level . 0 0 |
| 25 | 24.2.8.5-LT CABLE 8.5. Supply and erection ofaluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 25sqmm |
| 26 | 24.2.8.7-LT CABLE 8.7. Supply and erection ofaluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 50 sqmm |
| 27 | 24.2.8.4-LT CABLE 8.4. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 16 sqmm |
| 28 | 24.4.15.1-STREET LIGHT 15.1. B.S.E.N. 10025 High Masts \\"Supply, installation, testing and commissioning of 12.5 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 6 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation atsite complete in all respect upto entire satisfaction of Engineer-in-Charge Thickness of Top and Bottom Section = 3 mm (minimum) Top Dia = 150 mm and Bottom Dia = 360mm Thickness of Galvanization - Top = 65 micron (minimum) and Bottom = 85 micron (minimum)\\" |
| 29 | 24.13.24-LT CABLES (Aluminium Conductor,Armoured and Unarmoured) PROVIDING& ERECTION/LAYING OF PVC/ XLPE INSULATED UNDERGROUNDALUMINIUM CONDUCTOR UNDERGROUND CABLELOOSE IN EXISTING PIPE OR TRENCHES COMPLETE INALL RESPECT WITH NECESSARY CONNECTION UPTOTHE ENTIRE SATISFACTION OF ENGINEER IN CHARGEOF THE WORK 24. 16 Sq mm 4 core (Arm.) Please Enable Macros to View BoQ information |
