|
| 1 | SCHEDULE 'A' PART-I: B/R WORKS |
| 2 | Taking down chowkat with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and as directed. |
| 3 | Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n exc 4.0 sqm each complete all as specified and as directed. |
| 4 | Taking down shutters of any description nexc 1 sqm complete all as specfied and as directed. |
| 5 | Taking down shutters of any description exc 1 sqm but nexc 2 sqm complete all as specfied and as directed. |
| 6 | M&L for second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 7 | M&L for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 8 | M&L for 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed |
| 9 | M&L for 30 mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed |
| 10 | M&L for taking down shutters of any description nexc 1.00 sqm adjusting and refixing in the same opening complete all as specified and as directed . |
| 11 | M&L for taking down shutters of any description exc 1.00 sqm but nexc 2.00 sqm adjusting and refixing in the same opening complete all as specified and as directed . |
| 12 | S&F in repairs 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and as direcetd |
| 13 | M&L for repairing aluminium doors of any description incl replacement of damaged rubber beads and hinges incl taking down and refixing the door in the same opening complete all as specified and as directed. |
| 14 | S&F in repairs butt hinges of 100 mm size medium weight cold rolled stainless steel and fixed complete all as specified and as directed. |
| 15 | S&F butt hinges of 100 mm size medium weight cold rolled stainless steel and fixed complete all as specified and as directed. |
| 16 | S&F in repairs butt hinges of 75 mm size medium weight cold rolled stainless steel and fixed complete all as specified and as directed. |
| 17 | S&F butt hinges of 75 mm size medium weight cold rolled stainless steel and fixed complete all as specified and as directed. |
| 18 | S&F in repairs 100 mm in size aluminium handles cast type complete all as specified and as directed. |
| 19 | S&F 100 mm in size aluminium handles cast type complete all as specified and as directed. |
| 20 | S&F in repairs 150 mm in size aluminium handles cast type complete all as specified and as directed. |
| 21 | S&F 150 mm in size aluminium handles cast type complete all as specified and as directed. |
| 22 | S&F in repairs for 150 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified . |
| 23 | S&F for 150 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified . |
| 24 | S&F for 100 mm longAluminium anodised barrel tower bolt of extruded section complete all as specified . |
| 25 | S&F in repairs for 100 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified . |
| 26 | S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed. |
| 27 | S&F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed. |
| 28 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 29 | S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 30 | S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 31 | S&F in repairs 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane incl hacking out old glass from wooden/steel/concrete complete all as specified and as directed. |
| 32 | S&F in repairs 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane incl hacking out old glass from wooden/steel/concrete complete all as specified and as directed. |
| 33 | S&F 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane incl hacking out old glass from wooden/steel/concrete complete all as specified and as directed. |
| 34 | S&F 3mm thick frosted Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 35 | S&F in repairs 3mm thick frosted Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane incl hacking out old glass from wooden/steel/concrete complete all as specified and as directed. |
| 36 | M&L for preparation of new or previously untreated wooden surface of any description over 10 sqcm and applying two coat of synthetic enamal paint over a coat of pink primer complete all as specified and as directed. |
| 37 | M&L for preparation of new or prviously untreated steel surface of any description nexc 10 sqcm and applying two coat of synthetic enamal paint over a coat of red oxide zinx crome primer complete all as specified and as directed |
| 38 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed |
| 39 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 40 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded wood grain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and wood grain pirinted PVC for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to & 5 mm thick x 15 mm wide PVC sheet beading and decorative PVC beading of 10mm x 10mm (90 degree) with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified . |
| 41 | M&L for factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) Area of opening nexc 2.00 sqm complete all as specified and as directed. |
| 42 | M&L for factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) Area of opening exc 2.00 sqm complete all as specified and as directed. |
| 43 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 44 | S&F Powder coating anodised aluminium frame for doors, windows, ventilatiors with one or more rebtes including joining cleat for fixing etc. complete all as specified. (Minimum thickness of powder coating 50 micron). |
| 45 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed echanically wherever required including cleat angle, Aluminium snap eading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 46 | S & F 9mm thick Prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed. |
| 47 | S & F in repairs 9mm thick Prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed. |
| 48 | M&L for toughened glass 12 mm thick as in hinged door,window, partition automatic doors and similar work including cutting to shape, drilling holes required including all fittings. |
| 49 | S & F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as directed. |
| 50 | S&F in repair Door closer Cast iron body hydraulically regulated, designation No.2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed |
| 51 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainlesssteel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and as directed. |
| 52 | M&L for 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work in repairs complete all as specified and as directed. |
| 53 | M&L for 0.90 mm thick Decorative laminates type I, or surface finish, colour and pattern as approved complete all as specified and as directed. |
| 54 | S&F in repair 30mm continuous(piano) hinges,mild steel, bright finish or electrogalvanised complete all as specified. |
| 55 | S&F 100 mm size Brass handles, cast type, polished bright complete all as specified and as directed |
| 56 | Dismantaling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 57 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165 |
| 58 | S&F in repair to Harrison rails,mild steel,chromium plated with fixing brackets,stops,rollers etc complete all as specified and directed |
| 59 | Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises. |
| 60 | M&L for light shade Virified Ceramic coloured tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement lurry and pointed in white or coloured cement to match and laid over 15 mm thk cement screed bed in cm 1:6 for laying floor finishes. |
| 61 | M&L for light shade Virified Ceramic coloured tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement lurry and pointed in white or coloured cement to match and laid over 10 mm thk cement rendering in cm 1:4 for laying floor finishes. |
| 62 | M&L Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 for laying floor finishes. |
| 63 | M&L Non-skid joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 for laying floor finishes. |
| 64 | M&L for Glazed ceramic coloured tiles 350x250x7 mm/450x350x7 mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or Coloured cement to match & including 10mm thick rendering in CM (1:4) on fair faces of brickwork or concrete surfaces complete all as specified. |
| 65 | Taking up or down steel tubing of 15 mm dia bore and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 66 | Taking up or down steel tubing of 20 mm dia bore and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 67 | Taking up or down steel tubing of 25 mm dia bore and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 68 | S&F 15 mm dia bore GI steel water Tubes medium galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed |
| 69 | S&F 20 mm dia bore GI steel water Tubes medium galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed |
| 70 | S&F 25 mm dia bore GI steel water Tubes medium galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed |
| 71 | Supplying and laying of 16 mm dia bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 72 | Supplying and laying of 20 mm dia bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 73 | Supplying and laying of 25 mm dia bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 74 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs , washers and wastes, incl bedding in cement moartor on to dwarf wall or incl fixing cantilever brackets and connecting union to pipe onerall size990x420 double bowl with size of 410x330x160mm complete all as specified and as directed |
| 75 | S&F 15 mm bore brass CP swinging mixer for mixing hot & cold water screwed down for iron pipe and fixed complete |
| 76 | S&F in repairs Vitreous China EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed. |
| 77 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe complete all as specified and as directed |
| 78 | S&F in repairs Vitreous China half stall urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed |
| 79 | S&F in PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed. |
| 80 | S&F vitreous China clay wash hand basin of size 550x400mm incl pedastal pattern complete all as specified and as directed |
| 81 | S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed |
| 82 | S& F in repairs Brass CP tubular towel rail 20 mm dia , 60 cm long including brackets compelete |
| 83 | S&F in repair single lever Basin mixer with popup waste with 450 mm long braided hoses of make Jaquar Cat Part No:- KUP-35051BPM or equivalent in Marc/Parryware/Prayag |
| 84 | S&Fin repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 m long of make Jaguar Cat Part No:ALD-565 or equivalent in Marc/Parryware/Prayag |
| 85 | S&F in repairs Soap dish holder of make Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/Parryware/Prayag |
| 86 | S&F in repairs Towel ring sqare shape stainless steel of Make Jaguar Cat Part No:-AKP-35751P or equivalent in Marc/Parryware/Prayag |
| 87 | S&F in repairs corner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag |
| 88 | S&F in repairs CP over head shower square shape of size 150x150mm of make Jaquar cat part No:OHS-CHR-1619 with CP shower arm of size 400x25x25 mm square shape for wall mounted showers flange of make Jaquar Cat partNo-SHA-455L400 or equivalent in Prayag/Hindaware/parryware |
| 89 | S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) of make Jaquar cat part No:OPP-15125PM or equivalent in Parryware/Prayad/Hindware |
| 90 | S&F in repairs Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete of make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware |
| 91 | S&F in repairs vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39601 of size 635x430x190 mm incl waste coupling Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware |
| 92 | S&F in repairs Towel rack 600mm long with lower hangers , stainless steel of make Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag |
| 93 | S&F stainless steel kitchen plate of size 24'x30'10' with all fittings and fixtures for instalation of plate rack complete all as specified and as directed |
| 94 | S&F in repairs syphon of single piece EWC with all fittings and fixtures for any description and make of EWC complete all as specified and as directed. |
| 95 | S&F 20mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed |
| 96 | S&F 25mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed |
| 97 | Supply hoisting and fixing in rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 1000 ltrs in position incl float valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl dismantling of tank all as specified and directed. |
| 98 | Supply hoisting and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl float valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl dismantling of tank all as specified and directed. |
| 99 | S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth. |
| 100 | S&F in repairs Brass CP angular stop cock fancy type with Capstan heads of make Jaguar/Marc/Parryware |
| 101 | S&F in repairs bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commericial ply wood and fixed to wooden plugs with CP brass screw and cup washer. |
| 102 | M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement |
| 103 | M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete |
| 104 | M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete |
| 105 | S&F PVC (SWR) bends 110mm dia complete all as specified and as directed |
| 106 | S&F PVC (SWR) bends 75mm dia complete all as specified and as directed |
| 107 | S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof. |
| 108 | S&F PVC Connections pipe of 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed. |
| 109 | M&L for 16/18 mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as directed. |
| 110 | Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete |
| 111 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc including removal of debris out side MD land complete all as specified and as diretced. |
| 112 | M/L precast cement concrete block masonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified. |
| 113 | M/L precast cement concrete block masonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified. |
| 114 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and as directed. |
| 115 | M & L 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate as in subfloors finished even and rough without using extra cement complete all as specified and as directed. |
| 116 | M&L for 75 mm thick PCC (1:3:6 ) type C -2 as in Plinth protection finished even and smooth without using extra cement complete all as specified and as directed. |
| 117 | M&L for providing precast cement concrete set in CM (1:4) type B1 1:2;4 (20 mm graded aggregate) in landings,cover slabs , shelves and similar artilces with plain faces incl formwork complete all as directed and as specified |
| 118 | M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 119 | M&L mild steel TMT bars 5 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally in stirrups with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 120 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 121 | M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even & smooth without using extra cement with WPC (WPC paid separetely) complete all as specified and directed. |
| 122 | M&L 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even & smooth without using extra cement complete all as specified and directed. |
| 123 | M&L 5 mm thick rendering on ceiling surface in cement mortar 1:3 finished even and smooth without using extra cement. |
| 124 | Supply only integral water proofing compound ISI marked. |
| 125 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint on wall complete all as specified and as directed. |
| 126 | M&L for preparing old painted surfaces and applying one coat of cement based paint on walls. |
| 127 | M&L for preparing newly plastered surface with two coats of oil bound distemper over a coat of primer on ceiling surface. |
| 128 | M&L for preparing old distempered wall surfaces and applying one coat of oil bound distemper on walls. |
| 129 | M&L preparing old distempered ceiling surfaces and applying one coat of oil bound distemper on ceiling. |
| 130 | Material and labour for complete removal of existing treatment from old decorated plastered surfces of wall by Vacuum based sanding machine, removal of nails etc & filing cracks / hole with putty, applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and proper mixing of putty ) and appling two coat of emulsion distemper white or coloured complete all as specified and directed as per manufacturers instruction. |
| 131 | Preparation of New or previously untreated surfaces of cement or plastered surfaces, of any description and girth, not otherwise described and applying 1mm thick wall care putty and primer on wall surface to achieve even and smooth surface and applying two coats of oil bound distemper on walls. |
| 132 | M&L for preparing old decorated plaster surfaces etc and applying one coat of white wash on ceilings complete all as specified and directed. |
| 133 | M&L for preparing old plastered surface with one coats of white wash on wall surface. |
| 134 | M&L for preparation of old painted surfaces of wood and wood based materials of any description, not otherwise described and applying one coat of Synthetic enamel paint over 10 cm width or girth complete all as specified and directed. |
| 135 | M&L preparation of old painted steel and iron surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 136 | Complete removal of existing treatment and preparation of old or previously surfaces and applying a thick layer of wall care putty and primer on wall surface to achieve even and smooth surface and applying two coats of weather proof acryic emulsion paints, exterior grade (100% acryic) on surfaces of walls. |
| 137 | M&L for preparing old painted surfaces by washing rubbing down and stopping of painted surfaces and applying one coat of weather proof acrylic emulsion paint,exterior grade on surfaces of walls. |
| 138 | Material and labour for preparation of newly plastered surfaces of wall by vacuume based sanding machine, applying wall care putty (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coat of emulsion distemper white or coloured complete all as specified and directed as per manufacturers instruction. |
| 139 | M & L Providing pressure gunitting in CM (1:3) upto 40mm thick averaging 25mm thick for soffits of slabs, beams, columns,chajjas, cantilever slab, fins, stair cases, railing etc complete all as specified and directed including brush bond as per manufacturer instruction and supply and fix welded steel wire fabric of mesh 75x25mm of weight not less then 4.0KG per 1 Sqm fixed to proposed surface for guniting with suitable pins/clamps/welding to the existing reinforcement after preparing old surface and applying polymer modified cementions coating on concrete surface prepared for gunniting using NITTO bond/brush bond of M/S Fosroc Chemicals and equivalent and applying epoxy treatment to exposed surface and making good surface with colour wash/white wash/snowcem painting two coats as specified and as directed Please Enable Macros to View BoQ information |
