|
| 1 | Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and directed |
| 2 | M & L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cm 1:6 all as specified and directed |
| 3 | M & L precast cement concrete solid blocks exc 10 cm in width, built in cement mortar 1:6 type C1 1:3 :6 using 20 mm graded stone aggregate all as specified and directed |
| 4 | M & L for rendering 15 mm thick on fair faces of brick or concrete wall surfaces finished to even and smooth without using extra cement in CM 1:4 complete all as specified and directed. |
| 5 | M & L 25 mm thick precast cement concrete louvres and jallies,Type C-0 , 1:3:6 ( using 12.5 mm graded aggregate) measured solid including all moulding set in cement mortar 1:6 complete all as specified and directed |
| 6 | S&F TMT bars 6 to 8mm mm dia cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 7 | M&L for PCC Coping in PCC 1:3:6 type C-1 using 20mm graded aggregate, chamfered edges etc including necessary formwork all as specified and directed, |
| 8 | M&L for preparation of newly plastered surface of wall and applying two coats of weather coat paint over a coat of primer on plastered surfaces as on walls complete all as specified and directed |
| 9 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for flooring hard sting etc complete all as specified and directed |
| 10 | M&L 75 mm thick PCC type D-2 ,1:4:8(using 40 mm graded stone aggregate) as in sub base of hard standing, flooring and paving etc complete all as specified and directed. |
| 11 | M & L Chequered cement concrete tiles 25 mm thick, any shape and size, set & jointed in neat cement slurry in floors with grey cement and pigments over and incl. 20mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 12 | Demolition of Stone slabs /cement tiles etc of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified and directed |
| 13 | M&L for 200 mm thick as in Granular sub base of kankar or laterite,spread,rolled and consolidated to gradient and camber required etc complete all as specified and directed. |
| 14 | Sand filling under floors including watering and consolidation complete all as all as specified and directed |
| 15 | M & L Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-30 Grade with pigments complete all specified and directed. |
| 16 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed |
| 17 | Dismantling of posts or struts embedded in cement concrete,brick work etc ( wood,steel or RCC)any section including taking out embedded portion and making good disturbed ground all as specified and directed. |
| 18 | M&L for cement concrete type C2 1:3:6 (40 mm graded aggregate) as in foundation and mass concrete etc complete all as specified and as directed. |
| 19 | S&F Joist, channel,angle ,or tee sections,fixed independently without connecting plates etc Fe 410 W Grade E- 250 complete all as specified and directed. |
| 20 | S&F framed works as in doors or gates of angle or other section with gusset plates ,rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel ,sheeting, or other covering ,running rails and guides)and hanging also fastenings and fixing complete all as specified and directed. |
| 21 | Dismantling old fencing wire mesh, any type complete all as specified and directed |
| 22 | Supply only chain link galvanised over PVC coated , of mesh size 50 x 50 mm complete all as specified and directed |
| 23 | Fixing only chain link fencing including line wires, any mesh, any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed |
| 24 | S & F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc all as specified and directed(each line wire to be measured) |
| 25 | Supply and fixing in repairs crossed spiral concertina coil 610mm dia/ 1000 mm dia , made up of 2.6mm HTGS spring core wire having tensile strength of 1600 N/Sqmm and punched tape of 0.5 mm thick and 13 mm wide after crimming. punched tape shall be of hot dipped galvanised min 20 micron and having medium barbs of 24mm width @ 35mm centre to centre. Each concertina coil shall be of min 50 turns and 5 clips in two turns ( weight of coil 8 Kg to be stretched up to 6-8 mtr i e 1.14 Kg/ RM) complete all as specified and directed |
| 26 | M & L preparation of new or previously untreated steel surfaces, of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over red oxide zinc chrome priming complete all as specified and directed. |
| 27 | M & L for preparation of old wall surfaces and applying one coat of weather proof coat paint complete all as specified and directed |
| 28 | M&L for preparing old steel surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint including preparation of surface all as specified and directed. |
| 29 | Demolition of reinforced cement concrete as in cover slab of drain not exceeding 15 cm thickness all as specified and directed |
| 30 | M&L for precast reinforced concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab set in and pointed in CM 1:6 including necessary formwork complete all as specified and directed. |
| 31 | S&F TMT bars 10 mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 32 | Dismantling of floor/ wall tiling including cement mortar bedding (but not backing) removing of unserveable tiles and rubbish of the premises complete all as specified and directed |
| 33 | M & L for 15 to 18 mm thick black granite (of any type) work (table rounded and polished) in gate pillars/ slabs/platforms etc , including15mm thick screed bed in CM 1:6 , pointing with white cement using admixture to match etc complete all specified and directed. Please Enable Macros to View BoQ information |
