|
| 1 | Part:- 1 (Civil Work) |
| 2 | Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lift. complete as directed by the E.I.C. |
| 3 | Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. |
| 4 | Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect. As per direction of Engineer in Charge. |
| 5 | roviding & laying cement concrete of prop (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150mm thick hoisting, lowering, laying, watering and curing etc. Complete. To the required levels including cost, conveyance, royality and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer in charge. |
| 6 | Cement Concrete (1:2:4) using 12mm size hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. |
| 7 | Fly Ash bricks (25x12x8)cm size having crushing strength 100kg/cm2 to 149kg/cm2 in cement mortar (1:6) in super structure after immersing the bricks for six hours in water before use including splays, cutting, circular moulding, corbelling, champhering and similar such type of works, scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. (SUPER STRUCTURE) |
| 8 | Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 9 | Providing 16mm thick cement plaster in C M (1:6) over walls including cost of all materials, labours etc complete.as per the direction of E.I.C. |
| 10 | Providing 12mm thick cement plaster in cement mortar (1:6) chemical treatment including cost of materials, labour etc. complete as per specification & direction of Engineer-in-charge. |
| 11 | 12mm thick cement plaster (1:4) over brick work with cement punning for skirting 177 |
| 12 | 6 mm thick cement plaster in cement morter (1:4) including cost, rayality, conveyance etc all complete 174 |
| 13 | R.C.C. M-25 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. as per specification & direction of Engineer-in-charge. |
| 14 | A)COLOUM BASE FOOTING |
| 15 | B)COLUMN SUPER STRUCTURE |
| 16 | C) PLINTH BAND |
| 17 | D) FLOOR BEAM |
| 18 | E) LINTEL |
| 19 | F)ROOF SLAB |
| 20 | Straightening, cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect. as per directiopn of Engineer in Charge. |
| 21 | Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M20 grade PCC on M-10 grade foundation 150 mm thick,foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per direction of Engineer in Charge. |
| 22 | Supplying and laying of M30 grade heavy duty factory made hydraulically pressed and mechanically compacted free cast interlocking pavers of 60mm thick, coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge. |
| 23 | Supplying, fitting and fixing Vetrified tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. |
| 24 | Fixing Vetrified tiles in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. As per direction of Engineer in Charge. |
| 25 | Priming 1 coat with wall primer water bond cement primer including all labour, materials etc. complete.as per direction of Engineer in Charge. |
| 26 | Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. As per direction of Engineer in Charge. |
| 27 | Wall painting two coat with any approved weather coat paint including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. |
| 28 | 2.50 cm thick grading concrete gradient (1:2:2) on roof slab with 6 mm size hard broken granite chips on new works including cost of conveyance royalty etc. all complete.as per direction of Engineer in Charge. |
| 29 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost of conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.as per direction of Engineer in Charge. |
| 30 | Providing Flush door shutter made of 30 mm thick solid core flush door shutter as per IS 2202 with 5 mm thick vision pannel of 6\\"/9\\" including cost etc complete.as per direction of Engineer in Charge. |
| 31 | Providing & fixing of Fixed vetilators of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6mm. Thick D quilty, galvanized as per IS-277 with Zinc of 120Gm/Sqm) with paint specification being with primer of 5-7 microns and finished paint with plyster paint (black /pearl white/Choclate Brown ) of 12-16 microns along with alkyd backer at the back of 5-7 micron and the size of outer frame being of 46x52mm and with all vetrical & horizontal mullions ar of 46x70mm & fixed beading are of 18x25mm.Accessories /gasket are to be used as per the manufacture's,supply and specification like handle being made of high grade aluminium power coated with nylon reciver & gasket will be made of EPDM. All corner brackets are to made of CRCA with zinc phospeting. the mullian caps & louvered-clips should be of glass filled nylon. the section are to be cut to length,mitre jointed with corne bracket & frames are fixed to the concret/ masonary work by means of self excapading screws & glas to be used of 5mm refelective with all taxes all complete. as per direction of Engineer in Charge. |
| 32 | OHT OF CAPACITY 1500 LTR (2 Layer) of make Syntex/Supreme etc. complete as per direction of Engineer in Charge. |
| 33 | Plumbing wiring with CPVC pipes of make Supreme/ Astral Pipes etc complete as per direction of Engineer in Charge. |
| 34 | Supply and Fixing of Plumbing Fittings as per direction of Engineer in Charge. |
| 35 | CP fittings |
| 36 | Long Body Bib cock, Pillar cock , Angle cock, |
| 37 | Ceramic Fittings |
| 38 | Counter top basin 2nos , Mens Urinal 2nos, EWC 4nos of Make Jaquar/ Hindware |
| 39 | Providing and Fiing of Open Gym Equipment etc. Complete as per direction of Engineer in Charge. |
| 40 | Providing and Fixing Two seated Arched Swing |
| 41 | Providing and Fixing Merry Go Round |
| 42 | Providing and Fixing Two seated see saw |
| 43 | Providing and Fixing Spiral slide |
| 44 | Providing and Fixing Rainbow climber |
| 45 | Providing and Fixing ABB crunch /Situp banch |
| 46 | Providing and Fixing Knee/Hip raise on parallel bar |
| 47 | Providing and Fixing Bench with fixed dumble |
| 48 | Providing and Fixing Bench with fixed weight lifting |
| 49 | Providing and Fixing Shoulder Exercise |
| 50 | Providing and Fixing Twister |
| 51 | Providing and Fixing Glider/leg press |
| 52 | Providing and Fixing Air swing |
| 53 | Providing and Fixing Poles with fixed weight |
| 54 | Providing and Fixing Walker |
| 55 | Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete. as per direction of Engineer in Charge. |
| 56 | Providing and Painting Two coat with Enamel paint over one coat primer to grill including cost of material, labours, T&P etc complete.as per direction of Engineer in Charge. |
| 57 | Supplying fitting & fixing of 35mm thick flush door shutters with flush door block board 'A' premium 35mm thick both side teak (Green ply / Allwin) both side laminated with 4 mm thick veener board (Teak Heritage) (Archid ply/ Green ply ) by using adhesives, with all labour, iron fitting & wooden hinged cleats etc. fitted & fixed complete in all respect, including cost of iron fitting , alluminum fittings, all labours, T&P etc. as per specification approved by the Department & as per direction of the E.I.C. |
| 58 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 151-154, 151-155, as windows frame section No. 151- 155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-incharge. |
| 59 | Supply, Fitting & Fixing of 5mm thick Black Glass including wastage etc.complete as per direction of Engineer in Charge. |
| 60 | Supply fitting and fixture of Chairs (VIP GARDEN CHAIR :- Size-4' Length, Seating Height- 18'', Total Height-36'', Seat- FRP Strip, Handle Frame- Cast iron. Model No- FGU-10) etc. complete as per direction of Engineer in Charge. |
| 61 | Supply Fitting and fixing of FRP Benches etc. complete as per direction of Engineer in Charge. |
| 62 | Providing and Fixing of Granite Flooring in floors, Treads and Landings over 25mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the shades of the Granite including cleaning etc. complete as per direction of Engineer in Charge. |
| 63 | Lifting & Installation of Baimundi Statue of approximately 13' etc complete as per diretcion of Engineer in Charge. |
| 64 | Supply and Installation of sprinkler system around the fountain area stc complete asper direction of Engineer in Charge. |
| 65 | Supply of Good quality Garden Soil preferebly red alluvial/ sandy loam with Texture neither too course neither too fine with a fair degree of water retaining adequate humus with a ph range from 6.5 to 7.5 should be free from any undesirable inorganic materials like wastage construction, roots and bushes of wild plants polythene garbage etc. To be collected after duly screened including with labour and T & P Charges for Loading, unloading and stacking at site in separate heaps of (1.5X 1.5 X0.5) cum or its multiplies taken into 1(one) cum for measurement. Spreading with average thickness of 6cm and completed in all respects as per direction of EIC. |
| 66 | Lifting and spreading of good garden soil uniformly over the surface area as per landscape design / advice of the site in charge etc. as per direction of Engineer in Charge. |
| 67 | Supply and spreading of Cow Dung Manure etc. Complete as per direction of Engineer in Charge. |
| 68 | Providing and Laying Corian Grass turf with Earth 50mm to 60mm thickness of Existing Ground prepared with Proper level and ramming with Tools wodden (Dhurmush) and then rolling the surface with light wattering with sprinkler and maintenance for 30 days or more till the grass establishes properly as per direction of EIC |
| 69 | Supply and Plantation of Trees as per direction of Engineer in Charge. |
| 70 | Foxtail Palm (10') |
| 71 | Terelia Mentalika Tree |
| 72 | Mini Tagar |
| 73 | Cassia Festula |
| 74 | Supply of Pots as per direction of Engineer in Charge. |
| 75 | Earthern pots of 14\\" |
| 76 | Earhern Pots of 10\\" |
| 77 | Laying of UPVC Pipeline of dia 50 mm throught out the Park with Sprinkler Facility from respective Boring Point (Minimum 7 Sprinklers) complete as per direction of Engineer in Charge. |
| 78 | Supply and Installation of 2 NOS OF BOREWELL WITH ALL FITTING FIXTURES etc. Complete as per direction of Engineer in Charge. |
| 79 | Supply & fixing of Dustbin indifferent location of parks ( 10 nos ) etc complete as per direction of Engineer in Charge. |
| 80 | Part: 2 (Electrical) |
| 81 | Recessed/ surface wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , PVC box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) - light point |
| 82 | Group-A |
| 83 | Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired, in all respect as per direction of Engineer in charge ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) |
| 84 | 2 x 1.5 Sqmm. + 1 x 1.5 Sqmm. |
| 85 | 2 x 4 Sqmm. + 1 x 2.5 Sqmm. |
| 86 | S/F of 18-25 watt LED Tube light fitting complete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge. |
| 87 | Supply & fixing of 10Watt LED Bulb (Make: Havels / Philips ) as per direction of Engineer-In-charge. |
| 88 | S/F of Gate light in aluminum die cast with modern artistic design and white PC diffuser suitable for retrofit LED lamps Mounting Pole Dia - 156 mm (max) OD. Dimension: ø 189 mm & Height: 370 mm complete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge. (Make Cromption/ Halonix /Havells/ Bajaj/ Orient) or Equivalent Make |
| 89 | Supply & Installation of 45 Watt RUBY LED Post Top Light with pressure dia-cast housing and toughened glass and individual LEDs with with IP65. including all necessary connection(Make Cromption/ Halonix /Havells/ Bajaj/ Orient) or Equivalent Make |
| 90 | S/F of 450mm Heavy duty wall fan with all fixing, with all connection testing and commisioning complete in all respect as per direction of Engineer in Charge. Make(Orient PSPO summer cool/Crompton / Almonard/ Khitan) |
| 91 | Supply and fixing of 18 watt, CW/WW 6500K, 1800 Lumen led ceiling light, making connection etc. as required complete in all respect as per direction of Engineer in Charge. Make (Philips/Bajaj/Havells/Crompton) |
| 92 | Supplying of 1200 mm energy efficient ceiling fan as per EIC of approved make including with all materials & labour as per direction of Engineer in Charge. |
| 93 | Supply and installation of celling fan regulator M- 079 as per direction of Engineer in Charge. |
| 94 | Supply & Installation of 120 Watt LED Flood Light with pressure dia-cast housing and toughened glass and individual LEDs with secondary lens optic with IP66 ingress protection. 4 KV in-built and 10 KV external surge protection. Efficacy 120lm/W. including all necessary connection(Make Cromption/ Halonix /Havells/ Bajaj/ Orient) or Equivalent Make. |
| 95 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required as per direction of Engineer in charge ( But without MCB/ RCCB/ ISOLATOR) |
| 96 | 16 WAY, SINGLE DOOR |
| 97 | 8 WAY, SINGLE DOOR |
| 98 | Supply and fixing of 5 amp to 32 amp rating 240 V \\"B\\" series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required as per direction of Engineer in charge.SINGLE POLE |
| 99 | Supply and fixing of 5 amp to 32 amp rating 240 V \\"B\\" series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.SINGLE POLE NEUTRAL |
| 100 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required as per direction of Engineer in charge. |
| 101 | Supplying and laying 6 SWG G.I. wires ISI marked at 0.5 meter below grond level for conductor earth electrode including soldering etc. as required as per direction of Engineer in charge. |
| 102 | Supply & Installation of 10 watt Mini mount LED Bollard of Sturdy IP 65 rating with excellent light out put through its sleek PMMA windows ensuring maximum illumination aspect in surrounding . including all necessary connection(Make Cromption/ Halonix /Havells/ Bajaj/ Orient) or Equivalent Make. |
| 103 | Supply & Installation of 9 watt LYCUS LED SPIKE LIGHT, Enviromental friendly, new generation, energy saving, decorative IP66 LED Spike light using COB LED as light source . including all necessary connection(Make Cromption/ Halonix /Havells/ Bajaj/ Orient) or Equivalent Make as per direction of Engineer in charge. |
| 104 | Supplying and fixing of following sizes of PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engineer in charge. |
| 105 | 25 mm. |
| 106 | Supply & Install of Electric Water Pump (Bore Well Submersible) of 1.5/2.00 K.W/HP, 220Volt AC, 50 Hz for water supply, including all necessary connection(Make Cromption/Kirlosker/ Vguard) or Equivalent Make, as per direction of Engineer in Charge. |
| 107 | Supply & Install of Water Pump Controller Control Panel) of 1.5/2.00 K.W/HP, 220Volt AC, 50 Hz for supply power to Motor, including all necessary connection(Make Cromption/Kirlosker/ Vguard) or Equivalent Make, as per direction of Engineer in Charge. |
| 108 | Supply and laying of size 04 core x 6 sq.mm XLPE insulated armoured underground aluminum cable for power supply from Panel Board to FRP Junction Box including cost of materials, labour, T&P and transportation etc. complete as per direction of the Engineer-in-Charge. |
| 109 | Supply and laying of 1¼\\" OD (8 Kg/cm²) HDPE Pipe for laying of cable including cost of materials, labour, T&P and transportation as per direction of the Engineer-in-Charge. |
| 110 | Supply and laying of size 04 core x 35 sq.mm PVC insulated PVC sheathed armoured underground aluminum cable for power supply from L. T. Pole to 3 phase outdoor stand mounted Panel Board to pole including cost of materials, labour, T&P and transportation etc. complete as per direction of the Engineer-in-Charge. (Make - Havels / Nicco / Finolex / KEI /Polycab) |
| 111 | Supply, Installation, Testing, and Commissioning of 63 Amp TPN Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge.Make-SEIMENS/HPL/ANCHOR/L&T/HAVELS/C & S/ RK |
| 112 | Supply, Installation, Testing, and Commissioning of 32 Amp DP Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge.Make- SEIMENS / HPL / ANCHOR /L&T / HAVELS / C & S/ RK |
| 113 | Pannel |
| 114 | Design, supply, installation, testing and commsioning of cubicle main panel for indoor/Outdoor installation of wether prrof design as per IP 44 class, made out of 2 mm thick CRCA sheet as per the drawing with cubicle type inernal arrangement of 1.6 mm thick sheet and with front & back opening system suitable for mounting following switch gears, busbars, metering unit, including painting with powder coated paint of approved colour and shed with earthing the body etc as reqd including the cost of material ,labor T & P as required as EIC. (drawing shall be approved by engineer -in charge) Make- SCHNEIDER / HPLIncommer:- 01 no. 125A., 25KA FP MCCB Busbar:- 04 nos. 200A. Al. bus bar duly sleeved.Outgoing:-i) 25/32A FP ,10KA, MCB-3nos,40/63A FP ,10KA, MCB-6nosInstrument:- i) 03 nos. phase indicating lamp with control fuseii) 01 Set of (0-200)A Digital Ameter with CTii) 01 Set of (0-500V) Digital Voltmeter Please Enable Macros to View BoQ information |
