|
| 1 | Supply of Steel tubler pole 11 mtrs long designatted at 410-sp 56 in 1:3:6 cement concrete foundation including exavation back filling etc. complete in all respects. UPERC P No 30 |
| 2 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. DSR Electrical 2018/ I. No. 11.3.4 |
| 3 | Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted) DSR Electrical 2018 /Item No. 11.5 |
| 4 | Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required. DSR Electrical 2018/ I. No. 12.42 |
| 5 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. DSR 14.16.1 a) 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 6 | 90 mm dia (OD-90 mm & ID-76 mm nominal) (14.16.2) |
| 7 | S/L of 3\\" (80mm) dia G.I. Pipe 'B' Class in the ground level including road cutting Complete in all respects as per direction of E/I DSR Electrical-18 12.38 |
| 8 | Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. DSR Electrical 2018/ I.No. 12.34 |
| 9 | Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect.PS No 634 |
| 10 | Painting on Existing Street light Octagonal pole of 10-12 Mtr Height with Primer & zinc paint using spray gun including required labour, T&P etc. (AOR) |
| 11 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PS No. 501 ( Grandley, Gloster, Kalinga, Havells, Nicco, Plaza Make). a) 16 sqmm x 4 core |
| 12 | b) 25 sqmm x 2 core (AOR) |
| 13 | c) 50 sqmm x 3.5 core |
| 14 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making onnection etc. complete in all respect as per direction of the Engineer-Incharge. PS No. 504a) 16 sqmm |
| 15 | b) 25 sqmm |
| 16 | c) 35 sqmm |
| 17 | d) 50 sqmm |
| 18 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. PS 725 (B) |
| 19 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects. PS No. 716 |
| 20 | Supply & erection of overhead line with ACSR conductor on poles / service bracket including binding etc. complete in all respects.PS NO 627 |
| 21 | S/f of 11 KV TPMO relco/Rama make 9 nos insulator of Jai shree/BHEL make complete in all respects. UPERC P No 48 I No. 13 |
| 22 | S/F of 11 kv, 100 Amp, Drop Fuse set Channel type (3 nos) (AOR) |
| 23 | S/F of 11 KV Disc insulator 70 KN and fitting B&S heavy duty with clamp of cross arm fixed on HT Pole BHEL/Jai Shree/WS/RR/Make UPERC P-43 |
| 24 | S/F of 11 KV pin 12\\" long with insulator of Jai Shree/HBHEL on cross arm fixed on HT pole including all T/P etc UPERC P-39 Annexure-16 |
| 25 | S/F of Copper Cable of size 2.5 mm x 3 Core. Complete in all respect (AOR) |
| 26 | Supply and laying 90 mm dia DWC ( Double wall corrugated pipe across the road by Trenchless method (Manual). Complete in all respect as per direction of E/I. (AOR) |
| 27 | S/F of Sintex Junction box No IIGSSJB2817 of size 240x130x110mm. Complete in all respects as per direction of E/I (AOR) |
| 28 | Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer if filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer-in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer-in-charge. (Civil AOR) P-20 |
| 29 | Centering and shuttering including strutting, propping etc. and removal if form work for Foundations, footings, bases for columns (AOR) P-19 |
| 30 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing, in position and binding all complete upto plinth level. Cold twisted bars (AOR) |
| 31 | Demolishing Cement Concrete manually by mechanical means including disposal of material within 50 mtr lead as per direction of Engineer-in-Charge, Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) DSR Civil 15.2.1 (AOR) |
| 32 | Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate moorum screening, red bajri and labour required. i) bituminious portion (AOR) |
| 33 | water bound macadam (AOR) |
| 34 | Cement Concrete with 2 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR, UPLNV, I.No. 5.07/S.N. 279 |
| 35 | Cement Concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR, UPLNV, I.No. 5.08/S.N. 281 |
| 36 | Taking out existing c.c. interlocking paver blocks from foothpath/central verge, including removal of rubbish etc. disposal of unserviceable material to the dumping ground, for which payment shall be made seperately and stacking off serviceable material withing 50 mtr lead as per direction of E/I (AOR) |
| 37 | Laying Old cemennt concrete interlocking paver blocks of any design/shape laid in required line, level currative colour and pattern over and including 50mm thick compacted bed of course sand filling the joint with fine sand etc. all complete as per direction of E/I (Old CC Paver block shall be supplied by the deptt free of cost) (AOR) Please Enable Macros to View BoQ information |
