|
| 1 | Desilting the supply well, intake well head works, sump of water supply/sewerage works, etc., in wet or dry condition, including lifts up to 9 m and lead up to 150 m as required beyond the worksite; stacking, spreading, including necessary guarding, etc., complete, as directed by the Engineer in-Charge. |
| 2 | Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area. |
| 3 | Cutting down trees including trunks and branches with girths above 30cm to 60cm and stacking the materials neatly with all lifts and lead of 1000m as directed and earth filling in the depression / pit if any. |
| 4 | Excavation for foundation in earth, soils of all types, sand, gravel, and soft murum, including removal of excavated material up to a distance of 50 metres beyond the building area, stacking and spreading as directed, dewatering, preparation of foundation bed, and necessary backfilling, ramming, and watering, including shoring and strutting, etc., complete. (Lift from 1.5 m to 3.0 m) By mechanical means. |
| 5 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. |
| 6 | Pushing of M.S. pipes for road crossing and railway crossing by push through method in all types of strata by using hydraulic jack and drilling machine of required diameter of M.S. casing pipes, lowering, laying, jointing, welding machinery, tripod, chain pulley block crane, blower, compressor, loading, unloading of machinery into trench, transportation, dewatering etc. complete, but excluding cost of M.S. pipes. |
| 7 | Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete. |
| 8 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 9 | Providing dry rubble stone pitching 23 cm (about 9) thick including all material, quarry spalls, labour etc. complete. |
| 10 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 12 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 13 | Rectangular plastic planters teracota: Rectangular plastic planters terracotta Upper length.60cm lower 29 cm height 27 cm |
| 14 | Providing and Constructing gabion structure 1 Meter high or required section made up of soft mechanically woven hexagonal shaped G.I. wire confirming to IS 16014:2012 having zinc plus PVC coating of overall diameter of 3.7 mm and tying lacing wire of 3.2 mm with edge wire confirming to overall diameter 4.4 mm edges being mechanically selvedge including placing in position, fitting neatly with trap stone rubble (15 to 23 cm) all loose ends to be securely tied (Excluding transportation) etc. complete. ( In Dry condition and for under water installation extra cost to be considered) |
| 15 | Providing Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with R.C.C. M 25 Grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH - 33022/1/94 DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified etc. complete. Spec: MORT and H 2013 Cl 811 Page No 360 |
| 16 | Providing and casting in situ or precast tapering R.C.C. M-20 Mountable type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant |
| 17 | Providing rubble stone paving 15 cm thick in 1:3 cement mortar over a bedding of 15 cm thick cement concrete in the proportion 1:4:8 with trap / granite / quartzite / gneiss metal, including striking joints and watering, etc., complete. |
| 18 | St. Street Pole Benches 6F-D-RO1, 6F-D-RO2 and 6F-D-RO3: Providing, fabrication and fixing stainless steel railing of 10 gauge, 304 grade material having minimum nickel content not less than 10% (laboratory testing certificate shall be provided for the used material), with 50 mm dia circular pipe backrest and 100 mm dia circular seat, including supporting, cutting, welding, riveting, polishing as directed, and fixing in cement concrete foundation, including removal of surplus material/debris and restoring damaged portion of footpath, etc. (Design details vide Drg. No. 6F-D-RO1 and 6F-D in the Catalogue of Street Furniture (Vol. I) published by M.C.G.M). Rate includes per meter per backrest pipe. Work complete as per specifications and as directed by the Engineer. |
| 19 | Providing and fixing outdoor promotional road median signage, fabricated with a commercial-grade Mild Steel (MS) frame and a high-quality white weather-proof finish, featuring double-sided digital printed graphics for civic or branding displays, including all necessary mounting hardware and installation on road dividers/central medians as per standard design. |
| 20 | Providing and fixing in position Guard Railing as per Drg. No. 15 Type C dt. 20-4 79, with 3 rows of 50mm dia. G.I. pipe 30cm a part and fixed in M.S. channels of section 125 x 65 x 6 mm spaced 2.5 C/c 1:2:4 c.c. bedding of size 45 x 30cm. as per detailed drawing, with 3 coats of approved yellow and black paint including necessary excavation in any strata. |
| 21 | Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete |
| 22 | Providing and applying external raincoat painting with crack-filling acrylic polymer–based chemical compound coating to the external surface of walls to prevent water seepage in masonry walls during monsoon, added with required shade stainer to achieve the desired shade, in two coats. Including providing three coats of polymer-based primer, preparation of surface by scraping existing loose old paint, removing loose sand particles, opening and cleaning cracks developed in external plaster, removing loose material by chiseling, and filling cracks with approved chemical compounds with proper penetration, etc. Application of raincoat shall be carried out using brush, strictly as per manufacturer’s specifications and instructions, and as directed by the Engineer-in-Charge. The work shall be executed only by a certified applicator and shall include a 3-year guarantee on court stamp paper of Rs. 500/-, along with all necessary testing, etc., complete. |
| 23 | Supply and Spreading of Red Hill Earth. Red hill earth should be fresh from quarry free from weeds, stones , rubbish like dry grass and other material, reddish in colour, should be well sieved 90% to pass through I.S. sieve of 10 mm. Size. Spreading of Red Hill Earth at site as directed by site incharge. |
| 24 | Supply and Spreading of Cow Dung Manure. It should be well rotten and free from undecomposed grass ( Husk/Grass) Dark Brownish to stint black in colour having 25% Moisture. Spreading of Cow dung manure at site as directed by site incharge |
| 25 | Planting of lawn- Laying of Carpet lawn ( zoysia / American / mexican/ korean carpet ) Carpet lawn should be free from weeds pathogens , compact, root should be healthy , undamaged laying on prepared ground uniformly , as instructed by site incharge watering immediately after laying and maintenance till settlement of lawn. |
| 26 | Planting of shrubs/ creeper/ climbers/ ground Covers on Prepared Ground excluding cost of plants. Digging of Hole in a prepared ground ,Removal of shrub from pollybag without disturbing rootball and planting and resurfacing of planted area by Soil and manure as directed by site incharge. Maintenance of newly planted shrubs for one month and Filling. |
| 27 | Coleus 6 \\"to 9 \\" height excluding pollybag (Mixed species of shrub/creeper/climbers/ground cover in similar rate) |
| 28 | Preparation of pit and planting of tree in excavated pit on hard surface – filling of excavated pit of size 1.0 m × 1.0 m × 1.0 m with red hill earth and cow dung manure in 2:1 proportion, and planting of tree with staking and preparation of tree basin for proper irrigation. Excluding cost of tree. Felling of Excavated pit by Excavated soil , RHE and CDM in 1:1:1 proportion , well mixing of Excavated soil RHE,CDM , Digging pit in said mixture and plating of tree , proving and fixing of bamboo stacking after plantation , watering immediately @ 12 Lit per tree. Maintenance and Watering up to 60 days free of cost . Filling of casualty during the maintenance period without extra cost |
| 29 | Emblica officinalis 4' to 5 ' height excluding pollybag (Mixed species of plants in similar rate) |
| 30 | Providing and casting a ferrocrete water tank at site, including all costs of labour and materials, complete up to 25,000 litres. (Foundation and providing and fixing of taps, etc., shall be considered separately.) |
| 31 | Installation of drip and sprinkler irrigation system that includes main water lines, laterals, sublateral, driper and sprinkler and all spare parts required for Irrigation system , roviding and Fixing , Installation of Drip and Sprinkler Irrigation system in gardens having area Up to 1000 Sq. Mtr. Incudes drips, Sprinkler, Filters, Pipes With 3 year warranty. Excluding pumping system only. |
| 32 | Installation of drip and sprinkler irrigation system that includes main water lines, laterals, sublateral, driper and sprinkler and all spare parts required for Irrigation system Providing and Fixing , Installation of Drip and Sprinkler Irrigation system in gardens having area Up to 1000 Sq. Mtr. To 3000 Sq Mtr. Incudes drips, Sprinkler, Filters, Pipes with 3 year warranty, Excluding pumping system only |
| 33 | Installation of drip and sprinkler irrigation system that includes main water lines, laterals, sublateral, driper and sprinkler and all spare parts required for Irrigation system , Excluding pumping system only with 1 year gauaranty. |
| 34 | Providing and Fixing , Installation of Automised Drip and Fogger Irrigation system To Verticle biowall/ Verticle Garden . Incudes drips, Sprinkler,Foggers, Filters, Pipes and installation with 3 year warranty . Excluding Pumping UnitInstallation of drip and fogger irrigation system that includes main water lines, laterals, sublateral, driper and sprinkler and all spare parts required for Irrigation system , Providing and Fixing , Installation of Automised Drip and Fogger Irrigation system To Verticle biowall/ Verticle Garden . Incudes drips, Sprinkler,Foggers, Filters, Pipes and installation with 3 year warranty Excluding pumping system only. |
| 35 | QRC HDPE PUMP CONNECTING NIPPLE 63 to 90 MM |
| 36 | Supplying and erecting minimum Three & above star rated submersible pump set suitable for erection on open well of 5.625 KW/7.5 HP with 415 V 50 c/s. A.C. supply, having delivery head from 36 to 14m and discharge from 225 to 1680 litres. per minute& pipe of Suction 75 mm/Delivery 65 mm diameter erected with necessary H type clamps as per specification No. WP-OSP |
| 37 | COMMERCIAL CONTROLLER 6 STATION PLASTIC CABINET, TRANSFORMER INPUT 240 VAC 50/60 HZ, OUTPUT = 24 VA |
| 38 | 2\\" SIZE PROFESSIONAL GRADE PLASTIC SOLENOID VALVE 24 VAC. |
| 39 | Supply, installation, testing, and commissioning of a Post-Top LED Luminaire featuring a robust aluminum die-cast housing finished with a weather-resistant pure grey polyester powder coating. The luminaire shall utilize high-efficacy LEDs on Metal Clad PCBs and a Polycarbonate Fresnel optic lens specifically engineered to optimize light distribution while minimizing glare. The system must include a high-performance integral driver suitable for 240V operation and must be DarkSky approved to prevent light pollution. The entire assembly shall strictly comply with IS 10322 Part 5 / Sec 5: 2013 standards, ensuring reliable performance for landscape and pathway applications. |
| 40 | Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2 |
| 41 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formedwire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductorcomplete erected with glands & lugs, on wall/ trusses/pole or laid in providedtrench/ pipe as per specification no. CB-LT/AL |
| 42 | Supply, Installation, Testing and Commission of Fabricated Decorative Retrofit LED light fixtures on Street lights. |
| 43 | Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 32A TPN MCB incomer, 24hr astronomical time switch with minimum 5 years battery backup, IP 54 and IK10 protection, 25 A TP contactor for automatic switching of luminaires, 2 no. 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box with supporting angles, self lock, gasket and slanting top erected on CC foundation complete |
| 44 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 45 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 46 | Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP |
| 47 | Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP |
| 48 | Supplying and erecting static energy meter with 3 x 240V 50 Hz. AC supply 10 to 60 A, ISI mark, accuracy class 1.0 with backlit LCD display, (Measuring and display Trivector, V, I, kW, PF, Hz, Last month history of kWh and MD in kW) with special features like TOD, Tamper logging, Optical Communication Port & Display in absence of Power & with transparent hinge type box complete erected on polished teak wood board duly wired with required size of weather proof PVC wires duly tested by electric supply company. |
| 49 | Sub Total |
| 50 | Consultancy Charges: The consultancy charges shall cover planning, supervision of execution, quality monitoring, maintenance guidance, periodic reporting, and preparation of final completion documentation for the entire work. Payment terms shall be as specified in Clause No. 94 of Part II – Contract Data (Conditions of Contract).The consultancy fee shall be 5% of the subtotal of Sr. No. 1 to 48 (i.e., the overall cost of the work). Please Enable Macros to View BoQ information |
