|
| 1 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface, complete with 14 SWG copper earth continuity wire,GP Box ,piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect, as directed . |
| 2 | Wiring Point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface,complete with 14 SWG copper earth continuity wire , GP Box and piano type switch and socket etc |
| 3 | Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit on surface, with one number 14 SWG copper earth continuity wire, complete in all respect. |
| 4 | Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work. |
| 5 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve |
| 6 | S&F of 6 Amp. to 32 Amp. DP MCB (10 KA) C Curve |
| 7 | S&F surface/flush mounting 4 ways SPN distribution board without MCB complete in all respect,as directed at site by Engineer in charge. |
| 8 | Supply and burying of 40mm dia x 4.5 metres long G.I.Pipe vertically for earthing having 12mm dia. Holesspaced 75mm apart drilled up to 2 metre from the bottomcomplete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch boardthe cost of G.I. wire and pipe will be extra) upto switchboard, 30cm square C.I. box with hinged cover asonaryenclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as perdirections of Engineer-in-charge complete in all respects as per drawing. |
| 9 | Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. |
| 10 | Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. |
| 11 | Drilling of 150 mm dia T/W bore suitable for 110mm dia pipe/200mm dia T/W bore suitable for 140 mm dia pipe all complete with labour T/P as per direction of engineer incharge (Jal Nigam) |
| 12 | Supply and lowering of 110 mm dia 6kg/cm2 PVC pipe/140mm dia 10kg/cm2 with plastic net cover slots of pvc pipe by UPIN(phenolex or apb by E/I) all complete (ISI mark only) SOR 2017-18 (Jal Nigam) |
| 13 | Supply and pouring of pee gravels suitable for T/W bore all complete as per direction of engineer incharge (Jal Nigam) |
| 14 | S/F of 110mm PVC pipe adopter suitable for item no. 2 (Jal Nigam) |
| 15 | Supply of 2 HP submersible pump set with starter UPIN 65m head ( Pluga/Crompton Greeves/KSB) (GEM) |
| 16 | Supply and fitting of 4sqmm 3 core copper wired submirsible cable (ISI mark) complete in all respect (Jal Nigam) |
| 17 | Supply and lowering of 40 mm dia ribbed screen Ashirvad PVC pipe (ISI marked)/ 32 mm dia G.I. Pipe by UPIN and fixed with boat site threaded SS nipple all complete. (Jal Nigam) |
| 18 | Transportation of all material T&P etc to the site of work, loading, unloading and proper stacking at the site including return cartage of unused material with the diging the pit of boring work including supply all labour T&P with with arrangement of water required etc all complete. (Jal Nigam) |
| 19 | Installation of 2.00HP submersible motor pump with 32mm G.I. Lowering, submersible cable 4sqmm & installation of starter including supply of labpur, T&P etc complete in all respect (Jal Nigam) |
| 20 | Devlopment of bore hole till the discharges of water become free from sand and turbidity by compression and disinfection of bore including supply of all labour T&P (Jal Nigam) |
| 21 | Chemical & bacteriological testing of water sample (Jal Nigam) |
| 22 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. (SI No. 725(A)) |
| 23 | S/F of 32 mm dia G. I. Pipe complete with G. I. Fittings, clamps including all materials, Labour etc complete in all respects. (DSR 11.6.1) |
| 24 | Providing, laying and fixing 50mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc (DSR 14.13.1) |
| 25 | S/L of aluminim conductor PVC insulated armored, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (i) 16 sqmm 2 core (SI No. 20c.1.b) |
| 26 | S/F surface/flush mounting 4 way SPN distribution board with additional metal door without MCB complete in all respect and as directed at site. Cat A (SI No. 1022A) |
| 27 | S/F of CP brass bib cock 15mm of approved make complete in all respects. (DSR 7257) |
| 28 | S/F of gun metal non return valve 32mm of approved make complete in all respects. (DSR 1934) |
| 29 | Supply and fixing of 63 Amp. 415 volts TPN metal clad rewirable type switch fuse unit on angle iron bracket complete in all respects. (S.I. No. 316) |
| 30 | Supply and fixing of brass stop cock of approved make complete in all respects. (S.I. No. Civil DSR 7260) |
| 31 | Construction of 2.00m x 1.50 m x 2.80 m Water Coolar Cage made out of 50x50x5mm M.S. angle iron with 10 SWG welded wire mesh of size 1”x2”galvanized G I Sheet of 24 SWG on roof, top and side to protect the coolar from rain. The foundation of cage shall be of 0.15m in 1:2:4 cement concrete base and brick work in 1:6 cement and fine sand. The flooring of the cage should be 6” base concrete in the ratio of 1:6:12 and 4.00mm thick and plaster in 1:2:4 plain including painting with aluminium paints. The job includes supply of all materials, Labour T&P required for proper completion of work. (As per civil schedule Analysis) |
| 32 | Supply and fixing of 2 metres high cage fabricated with 3mm thick expanded metal fixed on 50mm x 50mm x 6mm angle iron frame having vertical members spaced at 1 to 1.25 mts and horizontal members spaced at 1 mt. The vertical members shall be grouted in floor and horizontal members in the wall to a depth of 300mm with ends forked. The cage shall have 2000mm x 1000mm size one leaf door with locking device having door frame fabricated with 35mm x 35mm x 6mm angle iron and 3mm expanded metal duly fixed with the cage member with hinges etc. The cage shall be painted with red oxide primer and synthetic enamel paint. The job includes all materials, labour, T&P etc. for proper completion ofwork. |
| 33 | Supply and hosting of sintax or equivalent high density polythylene seamless of piece mould tank complete in all respect Jal nigam |
| 34 | Mandi waste Powered Cold Room Biomass/Farm waste/ Crop waste Powered Cold Room - Automated PLC System/Control panel - Electronic Thermostat For Temperature Control - Air Cooling unit with single fan cold Room -Hot water genrator-cooling Tower FRP Type - Temperature Monitor& Controller (1° C to Cold Room) Cold Room - Refrigeration pipeline(Suction and vapour line) - Chamber of size 7.32x3.66x2.74 Mtr having 80 mm puff pannel(floor) and 80 mm wall/door/ceiling insulation Remote Monitoring System (RMS) -Temperature logging- Data accessible to user through a web interface - Live Camera streaming inside cold room Grid Backup to Biomass Powered Refrigeration -Danfoss Make Compressor MLZ030 - Indoor Unit with Control Panel - Includes Copper piping - includes stabilizer-Temperature Monitor& Controller(1° C to 25 °C) For Cold Room Mandi Waste Shredder - Chaff Cutter x 1no - 300-500 kg per Hour Output Humidifier Shipping and installation (excludes civil work) Including Product operational support for 1 year from date of commissioning. App. |
| 35 | 02nd year Opration after 1 year operational from date of commissioning For Biomass system 20 MT Cold Room (DSR-2025 E&M- 1021) |
| 36 | 03rd year Opration charges For Biomass system 20 MT Cold Room (DSR-2025 E&M- 1021) Please Enable Macros to View BoQ information |
