|
| 1 | Supply of 2.4 Mtr LED Decorative Poles made of square pipe duly CNC Cut Illuminated custmised design fitted with LED Module and Acrylic /PC 50 Watt CNC Cut portion and 4x2.5 sqmm watt LED Moulded on top. Pipe dia 200x200x4mm, Base plate 300x300x10mm (Total waltage of 150Watt) Complete in all respect as per direction of E/I. (AOR) |
| 2 | SITC of White 3000K 7W In-ground with in built honey comb louvre symmetrical luminaire made up of die-casting with Ø108 x 154mm,the Ø108 front ring should be made up of stainless steel 316 grade front ring with silicone black gasket and toughened clear glass diffuser. The luminous flux of the luminaire is upto 375 lm for 3000K BEAM - 15°/25°/40. The ingress protection is IP67 and impact resistance of IK08. The luminaire is integrated with high power CITIZEN COB with CRI≥80, SDCM≤3, L70/ B10 @ 60000 Hrs. The integral constant current driver comes with the power factor greater than or equal to 0.9, total harmonic distortion less than 15% with operating efficiency greater than 80% and a surge protection of 2KV. The driver input voltage 240Vac at 50-60Hz, operating voltage of 100-277Vac and operating temperature of -20˚ ~ 40˚C.Adequate heat sink with proper thermal management shall be provided. Operating Humidity : 10%-90%. THD should be less than 10%. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory will be submitted post the issuance of LOA to the successful bidder and before the supply of material. Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN. CE & BIS Certified. Including foundation and all t&p material etc as per direction by E/I. Complete in all respect as per direction of E/I. (AOR) |
| 3 | SITC of Input power : 6W and robust wall recessed luminaires for illuminating walls and stairs. Forward asymmetrical light distribution. Luminaire made of pressure die cast aluminium alloy high corrosion resistance and non corrosive A2 stainless steel fasteners. ABS plastic installation housing for preparing the recess opening in wall / stairs. Clear acrylic diffuser. Single cable entrance via M10 cable gland. Protection class IP65. Mechanical resistance IK09. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 4000K / 5700K, Colour rendering index (CRI)>80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Luminaire dimension : COD: 124 x 83 x 70mm. All tolerance should be ±15% Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN, CE & BIS Certified. Complete in all respect as per direction of E/I. (AOR) |
| 4 | SITC of 9W/m homgenous dot free linear 3000K 24Vdc CRI >80 MacAdam step 3 Dimension 1000 x 9.4 x 15mm, Beam angle : 120°, Electronic driver ON/OFF (External driver) IP rating IP65 Copper coated strip, Silicone moulded diffuser, End cap,Clip, Silicone moulded diffuser.This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire > 50,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency >70%, Power factor >0.80, Surge protection 3KV.CE and BIS, Make of LEDs - LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN. Complete in all respect as per direction of E/I. (AOR) |
| 5 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PS 501. 6 sqmm 3 core |
| 6 | 10 sqmm 4 core |
| 7 | 16 sqmm 4 core |
| 8 | Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making onnection etc. complete in all respect as per direction of the Engineer-Incharge. PS No. 504. 16 sqmm |
| 9 | 10 sqmm |
| 10 | 6 sqmm |
| 11 | Supply and laying 90 mm dia DWC ( Double wall corrugated pipe across the road by Trenchless method (Manual). Complete in all respect as per direction of E/I. (AOR) |
| 12 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. required .(AOR) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (AOR) |
| 13 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. PS No 807 40 A TPN |
| 14 | Supply and fixing of PVC corrugated conduits of 20 mm outer dia mtr. on surface as sleeving including all labour, T&P etc. required for proper completion of work as per direction and satisfaction of Engineer in charge PS No. 185 III |
| 15 | S/F of Sintex SMC Junction box model no. GSIB-2817 size 240x130x110 mm with porceline Kit-kat & Al. Bus-bar hinged nut for cable connection etc. as per direction of E/I. (AOR) |
| 16 | Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect complete in all respects. P.S.No. 1413 CAT AAA |
| 17 | Supply and Laying of copper cable 2.5 sqm x 3 core. Complete in all respect as per direction of engineer in-charge(AOR) |
| 18 | Supply and fixing of 3 Watt LED Path / Walkover luminaire having powder cotated die cast aluminium body with drive set . Confirming to IP 65 Protection complete in all respect. Complete in all respect. PS No-1441 |
| 19 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 3000 mm, Outer Dia 50mm, inner Dia 25, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with food mixture of retaining capacity one earth lead of 25mm x 3mm G.I. Strip upto switch board (from apron to switch board, the cost of G.I. strip will be extra.) along with 30 cm squrare C.I. frame with hinged cover masonry housing. PS No. 725 (B) |
| 20 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects. PS No. 716 |
| 21 | Earth work in excavation by mechanical means (Hydraulic excavator) manual means over areas exceeding 30 cm in depth, 1.5 m, in width as well as 10 sqm on plan) including getting out and disposal of excvated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil.(AOR) |
| 22 | Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer if filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer-in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer-in-charge. (Civil AOR) P-20 |
| 23 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing, in position and binding all complete upto plinth level. Cold twisted bars (AOR) |
| 24 | Cement Concrete with 2 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all mlaterials, labour, tools & plants etc. required for proper completion of the work. SOR 5.07 Schedule Item no. 279 (a) |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns (AOR) Please Enable Macros to View BoQ information |
