|
| 1 | Excavation in soil in hilly area in all heights and depths in all kinds of soil including saturated soil comprising of mixed soil, ordinary rock and hard rock. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damages to hill side, water pollution etc. and to protect stability of hill side .Rock shall be excavated with chiseling and wedging out of rock (where blasting is prohibited) .All earth work in cutting/excavation including rock excavation shall be carried out true to lines, grades, sides slopes, width, camber, super-elevation and level as shown on the drawing and as directed by the Engineer-in-Charge in conformity with the requirement of MoRD technical specification for Rural Road, Section. 300 & 1600 to achieve designed formation width including hauling and stacking of materials useful for construction at suitable sites safe manner and disposal of all surplus material to the approved dumping sites through all modes of transportation including head load and animal transport and mechanical means along with its leveling, fine dressing and carriage of machineries, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required. During the mobilization period, contractor should take the advanced x-sec in 15 m interval of whole road length in the presence of Engineer-in-charge or his representative. In case the advanced x-sec has been taken in the presence of Engineer-in-Charge representative, in that case the same has to be got approved from Engineer-in-Charge. The land for dumping sites shall be arranged by the contractors himself and nothing extra shall be paid on this account, filling of unevenness blind age and finishing of the road to specified dimensions or as directed by the Engineer-in-charge for smooth riding. The recovery for stones, whether useful or 9670.5 (Nine Thousand Six Hundred Seventy Point Five) cubic metre at the rate of Rs 300/-only (Rupees three hundred only) per cubic meter shall be effected on prorata basis in all circumstances. Any loss to the public and private property during the course of excavation shall be the absolute responsibility of the contractor, which shall have to be duly compensated by him in all cases. |
| 2 | Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drain and Parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks (Where blasting is prohibited) as per drawings and M.O.R.D. technical specification section 300 and 1600 and as per direction of the Engineer- In – Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides, bottom and back filling in trenches with excavated suitable approved material to the original surface in layer not executing 150 mm (one hundred fifty millimeter) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth any quantum of water including cleaning of slush which may arise out during dewatering complete as per direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 3 | Providing and laying concrete Mechanically mixed and vibrated 1:4:8 (One Cement isto four sand isto eight graded crushed stone aggregate 40 mm (forty millimeter) nominal size for plain /reinforced concrete in open foundations and plinths or similar works complete as per drawing and MoRD technical specification rural roads section 800, 900, 1200 and 1600 including carriage of materials upto all leads lifts and as per the direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 4 | Back filling behind abutment, wing wall and return wall and retaining wall with granular material complete as per drawings and MORD technical specification Section 1200 &1600 including carriage of materials with in all leads and lifts and as per the direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 5 | Providing weepholes in brick masonry /stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100mm (one hundred millimeter) dia (inner dia) PVC pipe extending through the full width of the structures with slop of 1(v);20 (H) towards drawing face complete as per drawings and MoRD technical specifications section 1200 and as per entire satisfaction, direction by Engineer-In-Charge and including carriage of materials with in all leads and lifts. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 6 | Providing and laying of boulder apron laid in wire crates with 4 mm (four millimeter) dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm (one hundred millimeter into one hundred millimeter) mesh (woven diagonally) including 10 % (ten percent) extra for laps and joints laid with stone boulders weighing not less than 40 kg (forty kilogram) each as per drawing and MORD technical specifications section 1300 including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 7 | Providing and laying concrete mechanically mixed and vibrated PCC M-10 (1:3:6 Nominal mix) with 20mm(twenty millimeter) nominal size for plain/reinforced concrete in open foundation and plinths or similar works complete as per drawings and MoRD technical specification section 800, 900, 1200 and 1600 and curing complete including the cost of form work and hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer in charge. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 8 | Providing and erecting W metal beam crash barrier comprising 3 mm thick corrugated sheet metal beam rail 70 cm above road/ground level fixed on ISMC series Channel vertical part of 150 mmx75 mm x 5 mm special 2.00 meter center to center 1.80 meter high 1.10 meter below ground road level all steel parts and filaments to be galvanized by hot dip process, a fitting to confirm to IS 1367 and IS-1364 metal beam rail to be fixed on the vertical post with a space of channel section 150 mmx75 mmx5 mm 330 mm long complete as per MORTH Specification section 800 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 9 | Providing and laying mechanically mixed and vibrated plain cement concrete in sub structure grade M-15 (1:2:4) Nominal Mix with 40mm (forty millimeter) nominal size graded stone aggregate on ground or under water including curing complete including pumping or bailing out water de-watering removal of slush as required at site, which may arises at the time of laying concrete complete for all heights/depths including cost of form work in parapets and toe wall etcetra as per drawing and MORD technical specification section 800, 900, 1200 and 1600 including carriage of materials within all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax or other taxes imposed by the Government but excluding GST. |
| 10 | Providing and laying concrete mechanically mixed and vibrated PCC grade M-15 (M-fifteen) design mix with cement contents not less than 275kg (two hundred seventy five kilogram per cubic meter) with aggregate 40mm(forty millimeter) nominal size for plain/reinforced concrete in open foundation and plinths or similar works (In Flooring) complete as per drawings and MoRD technical specification section 800, 900, 1200 & 1600 and curing complete including the cost of form work and hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer in charge. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 11 | Providing and laying concrete mechanically mixed and vibrated grade M-15 (M-fifteen) design mix with cement contents not less than 275kg (two hundred seventy five kilogram per cubic meter) with aggregate 40mm(forty millimeter) nominal size for plain/reinforced concrete in foundation plinth or similar works complete as per drawings and MoRD technical specification section 800, 900,1200 and 1600 and curing complete including the cost of form work and hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer in charge . The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 12 | Filling in foundation trenches as per drawing and MORD technical specification Clause 305.3.9 earth filling and as per directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royalty, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 13 | Providing and Laying reinforced cement concrete pipe IS (Indian Standard ) class NP3 (Non Pressure-three) of 900 (Nine hundred) millimeter internal dia meter for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (one cement is to two sand ) but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per drawings and MoRD technical specifications section 1100 including carriage of materials with in all leads and lifts as per the entire satisfaction and direction of Engineer-In-Charge. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 14 | Providing and Laying reinforced cement concrete pipe IS (Indian Standard ) class NP3 (Non Pressure-three) of 300 (Three Hundred) millimeter internal dia meter for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (one cement is to two sand ) but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per drawings and MoRD technical specifications section 1100 including carriage of materials with in all leads and lifts as per the entire satisfaction and direction of Engineer-In-Charge. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 15 | Loosening of the ground upto a level of 300 mm (three hundred millimeter) below the sub grade level, watered, graded with motor grader and compacted in layers to meet requirement of Tables 300.1 and 300.2 of MORD with three wheel 80-100 (eighty to one hundred) Kn static roller for sub grade construction as per MORD Technical Specification section 300. as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 16 | Construction of sub grade and earthen shoulders with approved material obtained from borrow pits with in all lifts and leads, transporting to site, spreading, grading by mechanical means to required slope and compacted with three wheel 80-100 (eighty - hundred) kN static roller to meet requirement of Table 300.2 complete as per MORD technical Specification section 300 & 1600 and as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 17 | Construction of Granular Sub-Base(Grade-1) by providing well graded materials, spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three Wheel 80-100 (Eighty-hundred) kN static roller to achieve the desired density, complete as per MORD Technical Specification section 400 for grading-I Material, as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 18 | Providing, laying, spreading and compacting by mechanical means crushed stone aggregate size 63mm to 45mm ( sixty three millimeter to forty five millimeter) Grading-II 75mm (seventy five millimeters) consolidated thickness to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty to one hundred) K.N. static roller in stages to proper grade and camber including applying and brooming, stone screening type-B of size 11.2mm ( eleven point two millimeters) nominal size at the rate of 0.20 cum ( zero point two zero cubic meters) per ten square meters and binding material at the rate of 0.06 cum ( zero point zero six cubic meter) per ten square meter to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications section 400 and as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 19 | Providing, laying, spreading and compacting by mechanical means of crushed stone aggregate size 53mm to 22.4mm ( fifty three millimeter to twenty two point four millimeter) Grading-III [75mm( seventy five millimeters) consolidated thickness] to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 K.N. (eight to one hundred) static roller in stages to proper grade and camber, including applying and brooming, stone screening type-B of size 11.2mm ( eleven point two millimeters) nominal size at the rate of 0.18cum (zero point one eight cubic meters) per ten square meters and to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications section 400 and as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental. The rate includes octroi, royalty, Malkana, toll tax or other taxes imposed by the Government but excluding GST. |
| 20 | Providing and applying primer coat with Bitumen emulsion (SS-I) on the prepared surface of granular base including cleaning of road surface with Hydraulic brooms and spraying primer at the rate 0.85 Kg. (Zero point eight five kilogram) per square meter using one part of bitumen emulsion SS-I and two parts of water mixed with Nano technology Tera prime emulsion @ 1% (One percent) of weight of emulsion by mechanical means as per M.O.R.D. technical specifications section 500 as per the entire satisfaction and directions of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidentals . The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 21 | Providing and applying tack coat with Bitumen emulsion (RS-I) on the prepared bituminous surface cleaned with hydraulic broom and spraying with bitumen emulsion pressure distributor at the rate 0.250 Kg (Zero decimal two five zero kilogram) per Square meter using one part of bitumen tack emulsion RS-I and two parts of water mixed with Nano technology nanotac @ 1.4% (One decimal four percent) of weight of emulsion as per MORD technical specification section 500, and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royalty, malkana toll tax and other taxes imposed by the Government but excluding GST. |
| 22 | Providing, laying and rolling of close-graded Mix Seal Surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) @ 0.338 kg/per ten square meter aggregates using penetration grade bitumen @ ie binders content @27.50kg/10sqm or 5.11% by weight and minimum density of MSS should be 2.10 gm/cc to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per M.O.R.D. technical specifications section 500 including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in Charge. The rate is including octroi, royalty, malkana toll tax and other taxes imposed by the Government but excluding GST. |
| 23 | Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm shall consist of a surface layer of appropriate sized concrete paving blocks paved and compacted over a thin bedding sand layer of specified grading, which is spread over a properly constructed and profiled base course and is bounded by properly installed edge restraints. The joints shall be filled by fine sand o specified grading. The work shall include supplying laying and paving of blocks including all materials, labour and equipment and performing all operations in connection with the laying of ICBP as per MORD Technical Specification section 1500 including the cost of form work and hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer- in- Charge. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 24 | Construction of unlined surface drains of average cross-sectional area 0.40 sqm (zero decimal four zero per square meter) in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment as per Technical Specification Clause 307 and as directed by the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royalty, Malkana, toll tax and any other taxes imposed by the Government but excluding GST. |
| 25 | Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and M.O.R.D. technical specifications section 1700 including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royalty, malkana toll tax and other taxes imposed by the Government but excluding GST. |
| 26 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tubes. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. with primer and two coats of epoxy paint as per drawing & MORD Specification section 1700 and Annexure 1700.1 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 27 | Providing and fixing of typical PMGSY informatory Logo as per MORD specifications and as per standard design of National Rural infrastructure agency development agency, of diamond size 600 x 600 mm, MS plate of 1.6 mm thick, and board plate of 1100 x 300mm, MS plate of 1.6 mm thick and 2.4 m deep 75mm x 75 mm x 6mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. size including fitting and painting, Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and MORD specification Section 1700.The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 28 | Reinforced cement concrete M-15 (M-fifteen) grade 5th (fifth) Kilometer stone (Precast) of standard design as per IRC :8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is including octroi, royalty, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 29 | Reinforced cement concrete M-15 (M-fifteen) grade Ordinary 200m (Two hundred meter) Stone (Precast) of standard design as per IRC :8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is including octroi, royalty, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 30 | Reinforced cement concrete M-15 (M-fifteen) grade Ordinary Kilometer Stone (Precast) of standard design as per IRC :8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is including octroi, royalty, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 31 | Providing and erecting direction and place identifications of semi reflective sign boards up to 0.90 sqm as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm of 12 SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and MoRD Technical Specification Section 1700 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 32 | Providing and fixing of Semi-reflective cautionary, mandatory and informatory sign board 600mm (six hundred millimeter) equilateral triangle as per IRC-67 made of 1.5 mm (one point five millimeter) thick MS-sheets duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65 mm (sixty five millimeter) width and required letters and figures with reflective tape engineering grade as per section 1700 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47mm of 12 SWG ( forty seven into forty seven millimeter of twelve Standard Wire Gauge) sheet square tube firmly fixed to the ground by mean of properly designed foundation with M-15 grade ( M-fifteen grade) cement concrete 450mm x 450 mm x 600 mm ( four hundred fifty into four hundred fifty into six hundred millimeter), 600 mm ( six hundred millimeter) below ground level as per drawings and MORD Technical Specification section 1700 including painting angle iron post with primer and two post of Epoxy paint as per specification and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royalty, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 33 | Providing and fixing of Semi-reflective cautionary, mandatory and informatory sign board 600mm (six hundred millimetre) Circular as per IRC-67 made of 1.5 mm (one point five millimeter) thick MS-sheets duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65 mm (sixty five millimeter) width and required letters and figures with reflective tape engineering grade as per section 1700 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47mm of 12 SWG ( forty seven into forty seven millimeter of twelve Standard Wire Gauge) sheet square tube firmly fixed to the ground by mean of properly designed foundation with M-15 grade ( M-fifteen grade) cement concrete 450mm x 450 mm x 600 mm ( four hundred fifty into four hundred fifty into six hundred millimeter), 600 mm ( six hundred millimeter) below ground level as per drawings and MORD Technical Specification section 1700 including painting angle iron post with primer and two post of Epoxy paint as per specification and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royalty, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 34 | Providing and fixing of Maintenance Board as per MORD specifications and drawing. MS Plates of 1.6 mm thick 900 mm x 1500 mm welded over 6mm thick steel plates. 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing MORD Specification section 1700 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 35 | Guard Stone on Curve made of Reinforced cement concrete local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and MORD technical specification section 1700 as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royalty, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 36 | Providing and Fixing pavement marker (Cat eyes) made out of ABS 3 M (three) plastic of size 128x110x29.5 mm ( one hundred twenty eight into one hundred ten into twenty nine decimal five millimeters) without nail having 50mm ( fifty millimeters) stem of ABS. The pavement marker shall be installed with epoxy ABS including carriage of materials and equipment with all mode of transportation and as per direction of MORD Specification section 1700 & Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 37 | Providing and fixing road side delineator of height 600mm (six hundred millimeter) made of MS pipe of size 50mm (fifty millimeter) of 1.6 SWG having High intensity micro prismatic reflective sheeting confirming to ASTM type-XI upto 300mm length Balance 300mm (three hundred millimeter) It shall be painted with synthetic enamel paint of alternate colour black & white strips. It shall be fixed with 30 x 30 x 30cm (thirty into thirty into thirty centimeter) block with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size as per specifications complete as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royalty, Malkana, toll tax or other taxes imposed by the Government but excluding GST. |
| 38 | Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high (eighty to one hundred centimeter) above ground level, painted black and white in 15 cm (fifteen centimeter) wide strips, fitted with 80 x 100 mm (eighty into one hundred millimeter) rectangular or 75 mm dia (seventy five millimeter diameter) circular reflectorized panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings and specifications complete as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royalty, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 39 | Providing and fixing road side Single Chevron markers of height 600mm made of MS pipe of size 50mm (fifty millimeter) of 1.6 (one point six) SWG having High intensity micro prismatic reflective sheeting confirming to ASTM type-XI upto 300mm (three hundred millimeter) length Balance 300mm (three hundred millimeter) it shall be painted with synthetic enamel paint of alternate colour black & white strips. It shall be fixed with 30 x 30 x 30cm (thirty into thirty into thirty centimeter) block with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size complete in all respect as per specifications complete as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royalty, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 40 | Providing and Laying of Cold applied thermoplastic compound road marking paint 2.5mm (two decimal five millimeter) thick with reflectorising glass beads at the rate 250 gram (two hundred fifty) gram per square meter area, thickness of 2.5mm (two decimal five millimeter) is exclusive of surface applied glass beads as per specification and with strips of 0.10 (Zero decimal one) meter width in centre lines or edge lines of the road as per the directions of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royalty, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 41 | Part-II:- Routine maintenance after completion of construction work as per term and condition of bid document and technical specification of ministry of rural development and rural roads including hauling carriage of all labour , equipment and materials to various location through all modes of transportations, all leads, lifts to the entire satisfaction of the Engineer-in-Charge. |
| 42 | For 1st year |
| 43 | For 2nd year |
| 44 | For 3 rd Year |
| 45 | For 4th Year |
| 46 | For 5th Year Please Enable Macros to View BoQ information |
