|
| 1 | Surface excavation n.exc.30cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified & directed. |
| 2 | Excavating in trenches, not exceeding 1.5 m wide or not exceeding 10 sq m on plan and not exceeding 1.5 m in depth for foundation etc and getting out in Soft/loose soil complete all as specified & directed. |
| 3 | M&L for Hardcore of gauge exc.63mm but not exc. 150mm ,deposited,spread and levelled in layers n.exc. 15cm thick,watered/rammed to a true surface complete all as specified and directed.. |
| 4 | Material and labour for providing cement concrete in foundations 1:4:8 type D2 ( using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed |
| 5 | Dismantling wrought iron or mild steel work not otherwise provided for any description complete all as specified and directed |
| 6 | Dismantling of old barbed wire of any description complete all as specified and directed. |
| 7 | Dismantling of old concertina coil of any description complete all as specified and directed. |
| 8 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 9 | Demolition of cement concrete reinforced in any description complete all as specified and directed. |
| 10 | Taking down cement plaster on brick or concrete wall etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 11 | M&L for Reinforced cement concrete M-25(design mix) in foundations, footings; plinth beams etc complete all as specified and as directed. |
| 12 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams in flate and similar work; vertical or to batter rough finished surfaces of concrete complete all as specified and as directed. |
| 13 | M&L for Reinforced cement concrete M-25(design mix) in beams, cantilevers, bressummers, lintels over 1.5m span, all as specified and directed. |
| 14 | M&L for Formwork to sides and soffits of beams, columns. all as specified and directed. |
| 15 | M&L for RCC M- 25 design mix using 20 mm graded stone aggregate in Columns, pillars, piers, posts and struts etc complete as specified and directed by Engr-in-Charge |
| 16 | Use and waste of form work to faces of sides of pillars, posts, struts, piers, columns and stanchions in flats vertical rough finished surfaces complete all as specified and directed. |
| 17 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 18 | All as per item no 17 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed. |
| 19 | M&L for Rendering 15mm thick with CM (1:4) on brick or concrete surfaces finished surfaces even and fair without using extra cement complete all as specified and as directed. |
| 20 | M&L for Rendering 15mm thick with CM (1:4) on other than fair faces of brickwork surfaces finished surfaces even and amooth without using extra cement complete all as specified and as directed. |
| 21 | M&L for brick work for fly ash built in CM (1:6) with straight or curved on plan exceeding 6 mtr mean radius complete all as specified and as directed. |
| 22 | Material and labour for preparation of newly plastred surfaces of wall by vaccume based sanding machine, and applying two coats of Anti Fungal paint white or coloured by Auto Roller, with 2mm thick wall care putty including necessary scaffoldings complete all as specified and as directed as per manufacturers instructions. |
| 23 | S&F for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified |
| 24 | Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by the Engr-in-Charge. |
| 25 | Supply & Fixing for 2.24mm dia 2 strand galvanised steel barbed wire with 2mm dia barbs at 75mm spacing and staining and fixing to any type of standard railing strainning both including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pin etc after and including dismantling of existing unserviceable barbed wire complete all as specified and as directed by the Engr-in-Charge. |
| 26 | Supply & Fixing in repair stainless steel concerntina coil fencing with punched tape concerntina coil 600mm dia 10 mtr openable length (total length 90mtr), having 50 nos round per 6 mtr length upto 3 mtr heigth of wall with 9 horrizsontal RBT reinforced barbed wire, stud tied with GI satples and GI clips to retain horrizontal, including nessesary bolts or GI barbed wire tied with angle iron complete all as specified and as directed |
| 27 | M&L for PCC (1:2:4) type B-1 Using 12.5mm graded stone aggregate as in copings including Ditto, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directednecessary form work complete all as specified and directed. |
| 28 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240.0 sq mm 3.5 core in trenches / through GI pipe / fixed along with pole structure etc with all fixing & connecting accessories complete all as specified and directed by Engr-in-Charge. |
| 29 | Supply and laying in trenches or fixing or passing through pipes or fixed to wall/pole 1100 volts grade XLPE insulated armoured heavy duty electric cables (conforming to IS 7098 (Part- I)with aluminium conductor of cross sectional area 10 Sqmm 4 core including connection cable glands, aluminium lugs etc includind taking down old unsv. cablecomplete all as specified and as directed. |
| 30 | M&L for heat shrikable type LT Jointing kit for 1.1 KV XLPE cables of size 240 sqmm 3.5 core straight through joint complete with jointing the cable all as specified and as directed by the Engr-in-Charge . |
| 31 | Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cable including spreading and punning down to desired thickness complete all as specified and as directed by the Engr-in-Charge. |
| 32 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 with flat, size 250mm x 150mm x 40mm complete specified and directed. |
| 33 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft loose soil complete all as specified & directed |
| 34 | Removing excavated material n, exc. 50 m and depositing outside MD land at a level n exc. 1.5 m above the starting point complete all as specified & directed |
| 35 | Re-laying of old serviceable PCC un-reinforced retreived from excavation for cable protection cover laid flat and dry in trenches over the cable prependicular to the direction of cable all as directed. |
| 36 | Taking down the LT cable from the existing tranch and relaying in the new tranch carefully with proper cusion complete all as directed and specified by Engr-in-Charge. |
| 37 | M&L for dismntaliing of Street light pole of any type including with its Light fittings,junction box,cables & foundation and keep in safe custody for refixing of serviceable items complete all as specified and as directed. |
| 38 | M & L for PCC (1:3:6) type C-2 (using 40 mm graded broken stone aggregate) as in foundation of street light pole complete all as specified and as directed. |
| 39 | Supply and fix Hot dip Galvanized Octagonal street light Poles of 7 meter long, Top dia 70mm , bottom dia 130mm and sheet thickness 3mm ,Base Plate 200x200x12 mm including top bracket arm of min 1m length for light fitting complete with base frame plate, four nos M20x600 'J' type foundation bolt, nut and washers, top etc., BSEN 10025-S355J0 or equivalent grade steel and base plate as per IS 2062, maximum wind speed resistance 169KM/Hr, complete all as specified and directed by Engr-in-charge.NOTE: Earth work,PCC will be measured and paid separtely under relevent item of this Schedule. |
| 40 | Refixing of existing serviceable lights of any wattage complete all as specified and directed by Engr-in-Charge. |
| 41 | M&L for wiring along with earth wire drawn inside in existing surface of pole with 2x2.5 sqmm and 1x2.5 sqmm earth wire of FR PVC insulated copper conductor sngle core cable in surface to pole fixed with clamps for connection from terminal box to the connector in street light all as directed. |
| 42 | Supply and laying HDPE pipes PN 10 and fittings include for jointing and jointing materials for cable protection to be fixed on road crossing with necessary clamps complete all as directed and specified by Engr-in-Charge. |
| 43 | M&L for road cutting/PCC/Drain or under boaring for passing of pipes and make correct the top surface as per ground requirement. Please Enable Macros to View BoQ information |
