|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise etc complete all as specified and as directed |
| 2 | Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 3 | Demolition of cement concrete and paving not exc 15 cm thick ( above ground level) complete all as specified and as directed. |
| 4 | Taking up or down 15 mm bore steel tubing and connections including complete all as specified and as directed |
| 5 | Taking up or down 20 mm bore steel tubing and connections including complete all as specified and as directed |
| 6 | Demolition and breaking up drain pipes up to 100 mm dia bofe (Salt glazed ware, AC or Reinforced concrete) set in cement mortar etc complete all as specified and as directed |
| 7 | Demoition of Stone slabs and tiles of any description or thickness in floors, aprons , laid bedded and pointed in any mortar etc complete all as specified and as directed |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed |
| 9 | Demolition of brick work /stone masonry masonry built in cement mortar of any description complete all as specified and as directed |
| 10 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work/ stone /concrete surface etc complete all as specified and as directed |
| 11 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed |
| 12 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed |
| 13 | Taking down shutter of any description area exc 1.00 Sqm but not exc 4.00 sqm each etc complete all as specified and as directed |
| 14 | Hacking out old broken glasses ( any thickness/type and in any position ) from wooden frames/metal frames fixed with oil putty or beads etc and removing from site complete all as specified and as directed |
| 15 | Material and labour providing cement concrete type 1:2:4 B0 (Using 12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed |
| 16 | Material and labour for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fast and filling of pressed steel chowkat etc complete all as specified and as directed |
| 17 | Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc. half brick but not exc. one brick thick wall complete all as specified and directed. |
| 18 | Material and labour Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 etc complete all as specified and as directed |
| 19 | Material and labour for brick work with sub class \\"B\\" bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed |
| 20 | Material and labour for Mirror polishing 20 mm thick Granite (of any type) with high gloss finish machine cut, in floor etc laid over cement screed and jointed with grey cement slurry and pointing with white cement with admixture of pigment to match the shade of granite stone including grinding & necessary polishing & over 15 mm thick screed with 1:6 CM complete all as specified and directed. |
| 21 | Material and labour for polishing 20 mm thick Granite (of any type) with high gloss finish machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointing with white cement with admixture of pigment to match the shade of granite stone including grinding & necessary polishing & over 10 mm thick rendering with 1:4 CM complete all as specified and directed. |
| 22 | Supply and fix 30mm thick flush door shutter solid core construction with block board core and ply wood face panes, connerical tuype on both sides etc complete all as specified and as directed |
| 23 | Supply and fix 2nd class hard wood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats etc complete all as specified and as directed |
| 24 | Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and as directed |
| 25 | Supply and fix factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed. |
| 26 | Supply and fix in repairs double action floor springs, hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heave duty and fixed etc complete all as specified and as directed |
| 27 | Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed ' |
| 28 | Supply and fix in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed ' |
| 29 | Supply and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed |
| 30 | Supply and fix aluminium anodised tower bolt 150mm long of extruded section etc complete all as specified and as directed |
| 31 | Supply and fix 100 mm thick butt hinges, medium weight, stainless steel and fixed etc complete all as specified and as directed |
| 32 | Supply and fix 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed |
| 33 | Supply and fix in helical door spring of 150mm long smooth functioning, automatically closing incl welding / reveting etc complete all as specified and as directred |
| 34 | Material and labour Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed |
| 35 | Supply and fix Factory made 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with double rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed |
| 36 | Supply and fix Factory made 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed |
| 37 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed |
| 38 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed/Sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed Note - Wire Cloth & Glass shall be measured and paid separately under respective items. |
| 39 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed Note - Particle Board & Glass shall be measured and paid separately under respective items. |
| 40 | Supply and fix 8 mm aluminium composite panel, exterior grade, with both side decorative choice lamination & fixed with screws in Door / Partiton work etc complete all as specified and as directed |
| 41 | Material and labour for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes etc complete all as specified and as directed |
| 42 | Material and labour for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in Vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 for backing coat of tiles / dado etc complete all as specified and as directed . |
| 43 | Material and labour for Glazed ceramic tiles (Coloured) as in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10 mm thick in CM 1:4 for backing coat of tiles / dado etc complete all as specified and as directed |
| 44 | Material and labour for Glazed ceramic coloured tiles 300X200X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match incl backing coat 10 mm thick in CM 1:4 incl etc complete all as specified and as directed |
| 45 | Material and labour for Virified Ceramic tiles (Drak Shade ) 9 to 10 mm thick (square/ rectangular) polished, area of each tiles 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes etc complete all as specified and as directed |
| 46 | Material and labour for Virified Ceramic tiles (Drak Shade ) 9 to 10 mm thick (square/ rectangular) polished, area of each tiles 0.18 sqm but not exceeding 0.38 sqm, in Vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Rendering 10 mm thick in CM 1:4 for backing coat of tiles / dado etc complete all as specified and as directed . |
| 47 | Material and labour for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each floor tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:4 incl etc complete all as specified and as directed |
| 48 | Material and labour for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each Verical tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in Vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10 mm thick rendering in CM 1:4 complete all as specified and as directed |
| 49 | Material and labour for 75 mm thick PCC 1:3:6, type C-1, (using 20 mm graded stone aggregates ) as in plinth protection ,hard standing etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade \\"A\\" complete all as specified and directed. |
| 50 | Material and labour for 75 mm thick cement concrete 1:4:8 type D- 2, (using 40mm graded stone aggregate) as in sub base of flooing etc complete all as specified and as directed |
| 51 | Material and labour for cement concrete type 1:2:4 B-0 (using 12.5 mm graded stone stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed |
| 52 | Material and labour for 100 mm thick Cement concrete type 1:2:4 B- 2, (using 40mm gradedstone aggregate) as in flooing etc complete all as specified and as directed |
| 53 | Material and labour for Providing and laying 80 mm thick factory made chamfered edges cement concrete paver block of M-30 grade with approved colour ,design &pattern as in footpath ,pranks lawns,drive ways or light traffic parking etc., of required strength ,thickness &size/shape ,made by table vibratory method using PU Mould,laid in require colour &pattern over and including 50 mm thick compacted bed of coarse sand, compacting and proper embedding /laying of inter locking paver blocks into sand bedding layer through vibratory compaction by using plate vibrator ,filling the joints with fine sand and cutting of paver block as per required size and pattern ,finishing and sweeping exra sand compete all as specified and as directed. |
| 54 | Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing incl cutting edges including in 20 mm thick screed bed CM (1:4) complete all as specified and as directed complete all as specified and as directed |
| 55 | Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the riser of steps, skirting, dadoand pillar laid including rubbing and Mirror polishing incl cutting edges including rendering in 10 mm thick CM (1:4) complete all as specified and as directed complete all as specified and as directed |
| 56 | Material and labour for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over including in 15 mm thick screed bed CM 1:4 etc complete all as specified and directed. |
| 57 | Material and labour for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed |
| 58 | Material and labour for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately |
| 59 | Supply only water proofing compound (Liquid) complete all as specified and as directed. |
| 60 | Material and labour for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed |
| 61 | Material and labour for Preparing new plastered suface of walls and applying two coats acrylic distemper white or tinted over a coat of primer etc complete all as specified and as directed |
| 62 | Material and labour for preparation new plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance (Apex Ultima), dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. etc complete all as specified and as directed |
| 63 | Supply and fix 5.5mm thick tinted sheet glass and glazing with oil putty in squares exc 0.5 sq. m in each pane etc complete all as specified and as directed |
| 64 | Supply and fix 4mm thick Figured glass, pin head type and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed |
| 65 | Supply and fix 4mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed |
| 66 | Material and labour for preparation of new or previously un-treated wooden surfaces of any description exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed. |
| 67 | Supply and fix for 15 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified. |
| 68 | Supply and fix for 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified. |
| 69 | Refixing old steel tubing 15 mm bore and connections in new or old position (walls/ceilings/floors etc) after cleaningcomplete all as specified. |
| 70 | Refixing old steel tubing 20 mm bore and connections in new or old position (walls/ceilings/floors etc) after cleaningcomplete all as specified. |
| 71 | Supply and fix 110 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls etc etc complete all as specified and directed |
| 72 | Supply and fix PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed |
| 73 | Supply and fix PVC vent cowls of 110mm dia etc complete all as specified and as directed |
| 74 | Supply and fix in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed |
| 75 | Supply and fix 75 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls etc complete all as specified and directed |
| 76 | Supply and fix PVC bends (any radius) of 75mm dia with access door etc complete all as specified and as directed |
| 77 | Supply and fix in repairs vitreous china squatting pan \\"ORISSA\\" patern of size 580x440mm white, with integral foot rests \\"P\\" or \\"S\\" or trap (excluding flushing cistern & flush pipe) incl provisioning of lime concrete bedding complete all as specified. |
| 78 | Supply and fix in repair vitreous china EWC size (540 X 365X 390 MM ) white with 'P' or 'S' trap front or back inlet any pattern excluding flushing cistern & flush pipe but including plastic water closet seat black closed pattern with flat bottom and cover and hinging device complete all as specified. |
| 79 | Supply and fix in repair PVC valve less syphonic action type flushing cistern 10 ltrs capacity low level white with inlet, ball valve, float and handle including brackets complete all as specified and as directed. |
| 80 | Supply and fix in repairs vitreous china ware wash hand basin white colour flat back of size 550x400mm including CI brackets, CP brass waste coupling 32mm etc complete all as specified and as directed. |
| 81 | Supply and fix in repairs 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick commercial plywood with aluminium framed alround fixed to wooden plugs with chromium plated brass screws and cup washer complete all as specified and as directed. |
| 82 | Supply and fix in repairs CP brass overhead shower 80mm dia round shape and and including CP brass shower arm 240mm long with wall flange complete all specified and directed. |
| 83 | Supply and fix in repair bib tap chromium plated cast copper alloy with capstan head wall flange screwed down screwed for iron pipe 15 mm bore complete all as specified and as directed. |
| 84 | Supply and fix in repair 15 mm angle stop valve cast (male or female thread) copper alloy chromium plated fancy type with capstan head, wall flange screwed down screwed for iron pipe complete all as specified and as directed. |
| 85 | Supply and fix in repairs 15 mm Pillar tap cast copper alloy in single lever with capsten head chromium plated fancy type screwed down high pressure with or without letter hot or cold with long screwed shank and flynuts screwed for iron pipe complete all as specified and as directed. |
| 86 | Supply and fix in repairs 15 mm stop valve (male or female thread) cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and as directed. |
| 87 | Supply and fix in repairs 15 mm stop valve (male or female thread) cast copper alloy fancy type chromium plated with long shank and cup (conceled type) with capston head wall flange etc screwed down screwed for iron pipe complete all as specified and as directed. |
| 88 | Supply and fix in repairs PVC connection pipe 15 mm dia 450 mm long with PTMT nut complete all as specified and as directed. |
| 89 | Supply and fix in repairs Health faucet chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube including making connections and fixed in position etc complete all as specified and as directed |
| 90 | Supply and fix PVC waste pipe suitable for 32 mm dia waste coupling for wash hand basin complete all as specified and directed. |
| 91 | Supply and fix in repairs waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms complete all as specified and directed. |
| 92 | Supply and fix in repairs Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and directed. |
| 93 | Supply and fix in repairs sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12mm wide with CP brass bracket guard railing 60cm long complete all as specified and directed. |
| 94 | Supply and fix in repairs Viterous China urinals, halfl stall type, complete including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, incl urinal spreader 15 mm bore, suitable size of 15 mm bore PVC connection 450 mm long and 40 mm dia bore 600 mm long LDPE incl 40 mm dia bore waste coupling etc complete all as specified and as directed |
| 95 | Supply and fix in repair Soap Dispenser with Metallic Bottle incl fixing etc complete all as specified and as directed |
| 96 | Supply and fix in repair Single Towel Rail 600mm Long, Stainless Steel incl fixing etc complete all as specified and as directed |
| 97 | Supply and fix in repair Towel Ring Square with Round Flange of incl fixing etc complete all as specified and as directed Please Enable Macros to View BoQ information |
