|
| 1 | Taking out LT XLPE/PVC insulated armoured cable alongwith all joints of any size from trenches wall/roof including taking out of brick layer and sand from trenches complete all as specified and as directed by EIC. |
| 2 | Excavation in trenches by mechanical means (hydraulic excavator) not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all kind of soil complete all as specified and as directed by EIC. |
| 3 | M&L for Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil. complete all as specified and directed by EIC. |
| 4 | Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed by EIC. |
| 5 | Supply & laying in repair galvanized steel tubing \\"light grade\\" size 40 mm bore with all fittings in trenches/ under roads/ along pole/ wall for cable protection all as specified & directed by EIC. . |
| 6 | All as per item No 5 but size 50 mm bore |
| 7 | All as per item No 5 but size 80 mm bore |
| 8 | All as per item No 5 but MS ERW Heavy class pipe 80 mm dia (3”), including cutting, threading, fixing with suitable clamps / saddles, bends, sockets/couplers, union, lock nuts, check nuts, making entries, and painting with one coats of red oxide primer and one coats of aluminium paint / synthetic enamel paint complete all as specified and directed by EIC. |
| 9 | Supply and fixing Double wall Corrugated High Density Polymer Ethylene (HDPE) pipe of 50 mm sizes as per IS 14930 (Part-2):2001, Laid in trenches/floors and fixed on walls/poles, with and including necessary fittings such as bends, sockets and other connected accessories etc., for laying of electric cables, complete all as specified and as directed by EIC. |
| 10 | All as per item No 9 but size 90 mm diameter |
| 11 | Supply, laying and testing 16Sqmm 2 core LT XLPE insulated PVC bedded galvanised steel strip or wire armoured earthed electric power cable with aluminium conductor 1100 volts grade, heavy duty in trenches/along pole or wall of following sizes complete all as specified and directed by EIC. Note:- 1. Excavation and earth work, DWC pipes, clamps, and cable joint shall be measured and paid separately under respective items :- |
| 12 | All as per item No 11 but size 25 Sq mm 3.5 core |
| 13 | All as per item No 11 but size 50 Sq mm 3.5 core |
| 14 | All as per item No 11 but size 70 Sq mm 3.5 core |
| 15 | All as per item No 11 but size 95 Sq mm 3.5 core |
| 16 | Supply & Fixing in repair 70-120 Sqmm 3.5 Core cable jointing kit for 1.1 KV grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 and 4 core XLPE armoured aluminium conductor cable complete all as specified and directed by Engr-in-Chrage..Make 3M-Seal/Birla/Denson Note : Excavation, returning filling and removal shall be measured and paid separately under relevant item of this BOQ |
| 17 | Road cutting for UG cable under road/railway crossing, pavement, hardstanding by manually means, protection GI pipe for cable of required dia and making it good to match with the adjoining surface/structure after passing the cable complete all as specified and directed. Note : GI pipe and PCC will be measured and paid against respective items. |
| 18 | Material and Labour for PCC 1:2:4 type D-2 using 40mm graded stone aggregate as in foundation of pole upto ground level complete all as directed by Engr-in-Chrage. |
| 19 | PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in coping/plinth block including necessary form work all as directed by EIC. Please Enable Macros to View BoQ information |
| 20 | PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in coping/plinth block including necessary form work all as directed by EIC. Please Enable Macros to View BoQ information |
