|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 meters lead.15.23.1 For thickness of tiles 10 mm to 25 mm |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 4.4.7 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 4 | Providing and laying matt finished vitrified tile of specified size havingwater absorption less than 0.5% and conforming to IS: 15622 of approvedmake in all colours and shades in outdoor floors such as footpath, courtyard multi models etc., laid on 20mm thick base of cement mortar 1:4(1cement: 4 coarse sand) in all shapes & patterns including grouting thejoints with white cement mixed with matching pigments etc. complete asdirection of Engineer-in-Charge.16.91.2 300x300x9.8 mm |
| 5 | Providing and laying Polished Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building allcomplete as per the architectural drawings with 18 mm thick stone slabover 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade includingrubbing, curing and polishing etc. all complete as specified and asdirected by the Engineer-in-Charge.11.68.1 Polished Granite stone slab jet Black, Cherry Red, EliteBrown, Cat Eye or equivalent. |
| 6 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete.13.88.1 1 mm thick |
| 7 | Finishing walls with 100% Premium acrylic emulsion paint havingVOCless than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali &fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives.13.94.1 New work (Two or more coats applied @ 1.43 litre/10 sqm. Over& including priming coat of exterior primer applied @ 0.90 litre/10 sqm |
| 8 | Applying one coat of water thinnable cement primer of approved brandand manufacture on wall surface. |
| 9 | Engaging welder including welding set with helper including electrodes etc. complete |
| 10 | Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying ofinter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand complete all as per direction of Engineer-in-Charge.16.94.1 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern. |
| 11 | Repair to existing manhole incl. labour and material etc. complete. |
| 12 | Disposal of dumped mulba beyond municipal limit by way of engaging trolley including loading and unloading etc. complete. |
| 13 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade. 13.70.1 Two or more coats on new work |
| 14 | 9999.1101609 Providing and fixing of sign board including welding, writing, painting as per direction of engineer- in- charge |
| 15 | Site clearance after completion of work by engaging labour = 3 labour for 2 days |
| 16 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:4.4.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Please Enable Macros to View BoQ information |
