|
| 1 | Supply and erection of Mild Steel Swaged Tubular Pole confirming to IS: 2713-1980 ( Part I-II) with base plate. The pole shall be made from steel tube and pipe (IS : 1141, Fe 410)including excavation of the pit and filling up the same with cement concrete of M15 Grade (1:2:4 mix) from base plate to 50 cm above ground level, earthing terminal, cable entry with 32mm dia B- class GI cable sleeves. The pole shall be painted with 2 coats of red oxide primer and 2 coats of enamel paint of silver. The job also includes the cost of form work and carriage of all required materials. (9 mtr. 410 SP-28) |
| 2 | Providing and fixing of detachable type round or square bracket (suitable for 4 lights) of 35-40 mm dia. GI pipe as per requirement. |
| 3 | Supply, laying, connecting and commissioning of 10 sq. mm 2 core PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade Aluminum LT cable , incl. cost of required al. thimbles duly crimped. |
| 4 | Providing & Fixing of IKO8 IP-66 protected high power LED flood light system with single piece Pressure die cast aluminum housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each. System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700k. Manufactures Word Mark/Name Engraved/Embossing/ Screen printing on die cast housing to allow traceability/ authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty ofproduct/accessories from.OEM shall be submitted. (100Watt ) (Havells/ Philips) |
| 5 | Supplying and drawing FRLS PVC insulated copper conductor single core cable through pole up to light. A. 2 x 2.5 sq. mm (P + N) |
| 6 | B. 1 x 2.5 sq. mm (Loop/ Common earth) |
| 7 | Providing and fixing/ laying of earthing station by way of placing GI electrode rod in a pit connected through GI strip. (complete job) |
| 8 | Providing and fixing of sheet steel enclosure box ( suitable size for housing of voltage stabilizer , 40A DP MCB 01 no, 5-32A SP MCBs 2 nos. and a suitable connector) with knock out for cable entry / out including fixing with nut bolt fastener etc required and to be fixed on the pole at a height of at least 8 feet from ground level. |
| 9 | Supply, installation, testing and commissioning of 40 A DP rating 240V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the enclosure box complete with necessary connections. |
| 10 | Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the enclosure box complete with necessary connections. |
| 11 | Supply, installation , testing and commissioning of relay type voltage stabilizer operating from input voltage 90-260Volt thereby producing output voltage of 230volts +_ 3%. (2 KVA) V- Guard / Liv- Guard / Servocon make. |
| 12 | Supply and installation of Timer Contactor with timer 32 Amp Please Enable Macros to View BoQ information |
