|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth,1.5m in width as well as 10Sqm on plan) including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Extra for every additional lift of 1.5m or part thereof in excavation/banking excavated or stacked |
| 4 | All kind of soil |
| 5 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 6 | Felling trees of the girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unservicable material. |
| 7 | Beyond 120 cm girth upto and including 240 cm girth |
| 8 | Above 240 cm girth |
| 9 | Banking excavated earth in layers not exceeding 20cm in depth, breaking clods, and compaction with wooden or steel rammers and dressing up in embankments for roads, floods banks, marginal blanks and guide banks etc lead upto 50m and lift upto 1.5 |
| 10 | Supplying and fixing Non-woven Geo textile having thickness of 400 GSM , having minimum taer strength of 1550 plus as per ASTMD624q having elongation t break % of 57 plus as per ASTMD4595 in two layers, made out of long fibre to hold the modulus and protect liner including cutting,sizing,head welding and needle punched for high porosity and proper percolation complete. |
| 11 | Supplying and fixing HDPE liner of approved brand 1.0 mm thick for the collection of water including heat welding on site and off site as per the requirement and direction of engineer-in-charge. |
| 12 | Carriage of earth by means of mechanical transport including loading and unloading within an average lead of 1.00 km as per the direction of EIC |
| 13 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work |
| 14 | 80 mm dia. nominal bore |
| 15 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 16 | 80 mm nominal bore |
| 17 | Providing and laying flanged C.I standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS: 1538 |
| 18 | Up to 300 mm dia |
| 19 | Supplying pig lead at site of work. |
| 20 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : |
| 21 | 100 mm diameteri) Class I |
| 22 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : |
| 23 | 80 mm diameter pipe |
| 24 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 25 | 80 mm nominal bore Please Enable Macros to View BoQ information |
