|
| 1 | Sand Filling in Foundation Trenches as per Drawing & Technical Specification Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 2 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits area lead up to 10 Km with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to97% proctor density requirement of table No. 300-2 MORTH specification no. 305 Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 3 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 4 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 5 | Providing and applying primer coat with SS2 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 6 | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder (VG-40) @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 7 | Providing and applying tack coat with bitumen (VG-10) using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 8 | Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder (VG-40) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 9 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 10 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 11 | Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.PCC Grade M15 using batching plant & manual placing Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 12 | Plain cement concrete M-20 in culvert complete as per Drawing and Technical Specification Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 13 | Furnishing and Placing Reinforced/ Prestressed cement concrete M-25 grade in foundation as per drawing and Technical Specification. Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 14 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 15 | Providing and Laying of Sheet Piling Up to 3.50 Mt Deep Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 16 | Providing Pumps and Doing Dewatering Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 17 | Center Line Edge Line (Thermo Plastic Paint) Providing and Applying Hot applied thermo plastic compound 2.5 mm thick including reflectorising glass beads @ 250 gm /sqm area. Thickness of 2.5 mm is excusive of surface applied glass beads as per IRC 35. The finish surface tu be leveled uniform and free streaks and holes. Composition of thermo plastic material shall be as per table 800-3 of clause 803 of MORTH including cost of all material labour T&P etc required for proper completion of work as directed by E/I. Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 18 | Cat Eye (Raised Pavement Marker/Road Stud) Sharp Curve and Abadi Portion. Supply and fixing of Raised Pavement marker (Cat Eyes) of Avery Dennision/3M make of approved quality in size of width not exceeding 20 mm and height not exceding 20 mm made up to strong Engineering Polymer thermoplastic polyurethene with Electronic welded abrasion resistant lenses for Retro Reflective in dry and wet weather condition alone with Bituminous adhesive as per MORTH Specification. Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). Please Enable Macros to View BoQ information |
