|
| 1 | Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable fopr various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V+/- 10%, Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraullc thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer'sdesign. Antithrust stream lined non return valve shall be provided with the pump 3 m. Submersible copper conductor cable, in single/double run and 2 pair of erection clamp 65 mm width 10 mm thick shall be provided with each pump. etc complete. 3 HP |
| 2 | Providing and erecting ISI mark CI D/F reflux valve as per IS-5312 Part I( 1984 ) & double flanged Sluice Valves conforming to IS-2906 / 14846 including worm gear arrangements as per test pressure, stainless steel spindle, caps, including all taxes, inspection charges, transportation, etc. complete a] Reflux valves- 50 mm dia PN-1 |
| 3 | b ]Sluice Valve- 50 mm dia PN-1 |
| 4 | Providing and supplying in standard lengths Polyethelene pipes confirming to IS 4984 with necessary jointing materials like mechanical connectors i.e. thread / insert joint / quick release coupler joint including all taxes ( central and Local ) transportation and freight charges inspection charges, loading unloading charges conveyance to the departmental store / site and stacking the same in closed shade duly protected from sunrays and rains etc complete 63 mm dia HDPE PE 100 6 Kg/cm2 |
| 5 | Providing and supplying ISI standard MS special of required thickness waith 3 coats of approved make epoxy paint (shalimar, ciba or mahindra & mahindra make ) from inside and outside including all taxes (central and local), octrol, inspectio charges transportation to stores / site and stacking etc. complete. A) All socketed special or socketed branch flanged special of all diameter. |
| 6 | A] Supplying and erecting GI sheet 1.6 mm (16 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. 1) G.I. sheet 16 gauge fabricated box for panel board |
| 7 | B] Supplying and erecting self locking arrangement with duplicate keys, made of brass duly erected, flush with surface of panel/cupboard. |
| 8 | C] Supplying and erecting Plywood fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete. 1) Marine water proof plywood 12mm thk |
| 9 | D] Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 40A. 4 pole complete as per specification No. SWRCCB/ RCCB 1] ELCB as per BIS 63 Amp 4 pole |
| 10 | E] Supplying and erecting panel mounting type digital Ammeter having Three and half digit LED display, external C.T. operated, calibrated for suitable to operate on 500V 0to1000A ACAC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. |
| 11 | F] Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. |
| 12 | G] Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps 230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires. Pilot Lamp Set |
| 13 | Supplying and erecting bank of All Polypropylene condensers with the standard capacities of 1,2,3,5,7,12,5,15,20 and 15 KVAR units of power factor correction for operation on 3 phase, 50 Hz, 400 V+/- 10% with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected and tested 1)All Capacitor polypropylene condenser [App] |
| 14 | Supplying and erecting Fully Automatic Star Delta starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load element, and ON - OFF push buttons, with necessary material and connected to supply, Starter with original sheet steel encloser.etc complete. UP to7.50& 12.50 HP |
| 15 | 5-1-7 Supplying and erecting Triple pole metal/ iron clad switch and fuse 415 / 500V 63A on angle iron / G.I. frame as per specification No. SWSWR/ MTP Metal clad switch 63 Amp |
| 16 | Supplying & erecting Four pole Iron clad/metal clad ON LOAD change over switch 40A, 415 / 500V erected on angle iron / G.I. frame approved make. Change over switch 63 Amp,4 pole etc comp. |
| 17 | 9-1-4 Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification No. EA-EP 12) Earthing GI 40mm dia type, charcoal |
| 18 | Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed.3 core PVC insulated, PVC sheathed copper conductor flat submersible cable etc complete. Submersible cable 3 core 6 Sq. mm |
| 19 | Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). 63 mm dia HDPE PE 100 6Kg/cm2 |
| 20 | Providing & supply of Electro Fusion Fittings in accordance with BS EN12201 Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/ PE100 pipes, in pressure rating SDR11 with min. PIN12.5 rated for water application and shall be incljusive of all cost such as testing, all taxes related to central, state & Municipal, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. completed Coupler 63 mm |
| 21 | Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. a)Air Valve Single Ball Flanged / ScrewedType - PN -1 15 mm dia. Air valve |
| 22 | sluice valve 50 mm |
| 23 | Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(Bd-A-1/259) a) In soil |
| 24 | Excavation for foundation / pipetrenches in hard murum and boulders,W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling,etc. complete.(Bd-A-3/259)Lift 0 to 1.5 M. |
| 25 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(Bd-A-4/259) Lift 0 to 1.5 M. |
| 26 | Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. (Bd-A-5/259) Lift 0 to 1.5 M. |
| 27 | Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete.(Bd-A-10/263) |
| 28 | Lowering, laying and jointing with HDPE pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cem-ent solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint). 63 mm dia HDPE PE 100 6Kg/cm2 |
| 29 | Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). 15 mm dia. Air valve |
| 30 | sluice valve 50 mm |
| 31 | Hydraulic testing of hdpe pipe line to specified pressure including cost of all materials and lobour and water for testing for specified length including cutting, placing end cap making arrengment for filing safe water using reciprocating typs pumps which should be able to provide specifiedtest spressure gauges and other nececcary equipment, labour, opration, charges etc. required for testing. the rate under this item shall also include cost of retesting, if necessary and reinstating to original position. etc complete. 63 mm dia HDPE PE 100 6Kg/cm2 |
| 32 | Providing and Laying in situ cement concrete M-15 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. PCC M15 |
| 33 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres |
| 34 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 35 | Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundationand bedding including bailing out water, form work, compaction, curing, etc. complete.(Cement 5.90 bags / cum) |
| 36 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water, striking joints on unexposed faces and watering complete. Spec.No.:Bd.H.1PageNo.329 |
| 37 | Providing flush grooved pointing with c.m. 1:3 or stone masonry work including scaffolding and curing etc. complete |
| 38 | Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete.(Bd-A-10/263) |
| 39 | Designing (aesthetically) and constructing RCC ground service reservoirs / RCC sumps in M-300 mix of requied capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion to inside face of the container including expoxy paing from inside including refilling and disposing of surplus stuff within lead of 50 m all labour and material charges, for laying and jointing of pipe assembly or inlet, outlet, washout, overflow and bye-pass arrangement consisting of CI / MS D/F pipes specials and valves of given diameters, providing and fixing accessories such as MS ladder inside and outside. CI mahole frame and cover, water top slab, B.B. masonry chamber for all valves ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code and giving satisfactory hydraulic test and water tightness test as per IS code and providing three coats of cement paints to all exposed surface of structure including roof surface etc.complete as per design data,criteria,obligatory requirements and detailed specifications.Anti-termite treatment shall be given for underground portion of the structure. |
| 40 | Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). 63 mm dia.PVC 4 Kg / cm2 pipe |
| 41 | Providing and supplying ISI standard PVC special of dia. & class including all taxes etc. complete. |
| 42 | Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(Bd-A-1/259) a) In soil |
| 43 | Excavation for foundation / pipetrenches in hard murum and boulders,W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling,etc. complete.(Bd-A-3/259) Lift 0 to 1.5 M. |
| 44 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(Bd-A-4/259) Lift 0 to 1.5 M. |
| 45 | Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) |
| 46 | Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete.(Bd-A-10/263) |
| 47 | Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cem-ent solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint). 63 mm dia.PVC 4 Kg / cm2 pipe |
| 48 | Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. |
| 49 | Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete |
| 50 | Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete |
| 51 | Providing and supplying ISI standard MS special of required thickness waith 3 coats of approved make epoxy paint (shalimar, ciba or mahindra & mahindra make ) from inside and outside including all taxes (central and local), octrol, inspectio charges transportation to stores / site and stacking etc. complete. A) All socketed special or socketed branch flanged special of all diameter. |
| 52 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 53 | Providing and fixing road junction/information sign boards of size 0.60x0.90 Meter Prepared 16 guage M.S.sheet on frame of M.S.angle of size 35x35x5mm with cross bracing of size 35x35x5mm including painting with one coat of zinccromates to vingprimer and two coats each of green white back ground and back side gray stoveenamelled, bonded with redretrore flective sheet Engineering grade,border/letters/numeral/arrows,coated with non pealable crystal clear protective transperent coatretaining 100% reflection including two angle iron post of size 65x65x6mm of 3.65m. longin flated at bottom,drilled on top and painted in white and black bands of 30cm. with 4Nos. high strength G.I. bolts and nuts of size 10mmdia. and 20mm long. Sheet and angle iron post in one piece with out joints including all taxes,conveying,fixing in ground with cement concrete1:4:8 block of 60cmx60cmx75cm size as directed by Engineer-in- charge etc. complete. Mild Steel Board with Engineering Grade. |
| 54 | विंधनकाम १५० मी. मी. व्यासाची विंधन विहीर खोदणे. (वाहतुक,रिमिग विंधनकाम, पक्या पाषाणात खोदकाम इत्यादिसह) |
| 55 | १८० मी. मी. व्यासाचा पी. व्ही. सी. केसिंग पाईप (६ कि. ग्रू./से. मी.२) (IS:४९८५-१९८८) |
| 56 | १८० मी. मी. व्यासाचा पी. व्ही. सी. कॅप बसविणे. |
| 57 | विंधन विहीर पूर्ण केल्यानंतर फलशिंगद्वारे (Air lift method) क्षमता चाचणी ९० अंशाच्या '' व्ही'' नॉचने मोजणे. |
| 58 | Ë´ÉvÉxÉ Ê´Éʽþ®ú ºlɳý ÊxÉζSÉiÉÒ Eò®úhÉä |
| 59 | Item No.1-Designing.Providing, supplying and commissioning of Drinking Water vending machine (ATM) including installation, necessary plumbing and electrification. Two years full warranty and maintenance of machine excluding consumable iems (Labour only).Agency shall get the source water tested and design the plant as per the standards.water quality test certificate of product water shall be as per IS 10500.Third party inspection of the entire machine shall be done as directed by Engineer-in Charge. (500 LPH) |
| 60 | Supplying, installing, testing and commissioning of 2 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (550 Wp X 4 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.c. ACDB/ DCDB, MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card/chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG 58720+58720+5% = 123312 |
| 61 | Additional MSEDCL Charges for Net Metering System at proposed for PWS Scheme including Solar Net Meter, Panel Cables, Earthing etc complete |
| 62 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates, etc. as per detailed design and drawing or as directed by Engineer- in charge including cutting, fabricating, hoisting, erecting and fixing in position, making riveted/bolted/welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. (Bd-C-8/278) |
| 63 | For structure Providing and applying material & labour for hot dip galv anizing of above structure including transport for galvanizing as per R.C |
| 64 | Supplying and installation of Solar PV Module cleaning unit consisting of nozzles spray, necessary pipes, valves, post, electronic panel board concealed with weather proof cabinet, spreading water periodically for removal of dust, related motor pump, controller, timer and nozzles set suitable for covering 5 KW Solar PV Module. (Approx. 35 Sq. Mtr. PV Module area). For 5Kwp 22541+ 5%= 23668.05 Please Enable Macros to View BoQ information |
