|
| 1 | Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, and precast concrete articles etc complete all as specified and directed. |
| 2 | Excavating in trenches not exc 1.5m deep & n exc 1.50 m wide for foundation etc and getting out in soft/loose soil complete all as specified and directed |
| 3 | Material & Labour for cement concrete type 1:3:6 (40 mm graded) as in surface channel and drain complete all as specified and directed. |
| 4 | M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 as in drain complete all as specified and as directed. |
| 5 | M & L for PCC type B-1 (using 20 mm graded stone aggregate) as in coping, parapet and other similar bands complete all as specified and as directed. |
| 6 | M&L providing RCC M-25 Design Mix (using 20 mm graded stone aggregate) as in foundation complete all as specified and directed. |
| 7 | M&L RCC M-25 design mix using 20 mm graded aggregate as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed. |
| 8 | M&L form work to sides of concrete foundation, footings bases of columns sides and soffits of plinth beams and similar work vertical or to batter for fair finished flat surface complete all as specified and directed. |
| 9 | M&L for form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed |
| 10 | M&L mild steel steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 11 | M&L mild steel steel TMT bars 8mm dia as in spaces and binders and binding with and including mils steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 12 | M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finishing surfaces even and smooth/floating coat with using extra cement slurry complete all as specified and as directed. |
| 13 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. |
| 14 | M & L of Reinforced concrete pipes 600 mm dia class NP 2 with one collar per length of pipe complete all as specified and as directed. |
| 15 | M&L for Returning, filling of soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 16 | Removing excavated soil n. exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 17 | Taking down of chowkhats or frame exc 1.5 Sqm but n.exc 4.0 Sqm (without taking off shutters from the frames) complete all as specified and directed. |
| 18 | Taking down chowkhats or window frames n.exc 1.5 Sqm each (without taking off shutters from frames) complete all as specified and directed. |
| 19 | S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and including decorative laminate 0.60 mm thick type 1 of surface finish and other side balancing white laminate 0.30 mm thick, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 20 | S&F 35mm thick factory made 1st class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 21 | S & F of pressed steel frames for doors 165 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 22 | M & L for PCC type B-0 1:2:4 as in roof kerbs or mud stops, rounded or chamfered on edges, fixing of hold fasts, and filling of pressed steel frames. Please Enable Macros to View BoQ information |
| 23 | M & L for PCC type B-0 1:2:4 as in roof kerbs or mud stops, rounded or chamfered on edges, fixing of hold fasts, and filling of pressed steel frames. Please Enable Macros to View BoQ information |
