|
| 1 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material upto all leads & lifts as per direction of Engineer-in-charge :. |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking upto all leads and lifts. Of area 3 sq. metres and below |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking upto all leads and lifts. Of area beyond 3 sq. metres |
| 4 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material upto all leads and lifts. Of sectional area 40 square centimetres and above |
| 5 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material upto all leads and lifts. G.S. Sheet |
| 6 | Dismantling wooden boardings in Celing ,lining of walls and partitions, excluding supporting members but including stacking upto all leads and lifts. Thickness above 10 mm up to 25 mm |
| 7 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (upto all depth & width as well as on plan) including getting out and disposal of excavated earth lupto all leads and lifts, as directed by Engineer-in-charge. |
| 8 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil in all lead and lift as directed and entire satisfaction of the Engineer -in -charge in All kinds of soil. |
| 9 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering including carriage of material in all leads and lifts. 1:3:6(1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) All work up to plinth level |
| 10 | Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specificatioclauses 614, 709, 1204.3.7 including carriage of material in all lead and lift. |
| 11 | Stone filling behind Retaining wall i/c carriage of material in all leads and lifts. |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering incuding carriage of material in all leads and lifts. |
| 13 | 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 14 | 1:5:10 (1 Cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form work for incuding carriage of material in all leads and lifts. Foundations, footings, bases for columns |
| 16 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth incuding carriage of material in all leads and lifts |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for all heights incuding carriage of material in all leads and lifts |
| 18 | Suspended floors, roofs, landings, balconies and access platform |
| 19 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 20 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 21 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 22 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding with PVC cross lock all complete upto plinth level / Above plinth level incuding carriage of material in all leads and lifts. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 23 | Providing and laying in design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge incuding carriage of material in all leads and lifts. |
| 24 | All works upto plinth level |
| 25 | All works above plinth level. |
| 26 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in all shapes and sizes incuding carriage of material in all leads and lifts. in Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 27 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level incuding carriage of material in all leads and lifts. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 28 | Stone soling properly hand packed filling interstices with spalls and consolidating with hand ramming including spreading watering and rolling of binding materials moorum or earth etc. complete as per H.P.P.W.D. specifications. 100mm spread thickness incuding carriage of material in all leads and lifts. (finished work including materials and labour) |
| 29 | Providing and fixing Ist quality ceramic glazed Floor & wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in floor, skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete incuding carriage of material in all leads and lifts. |
| 30 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length incuding carriage of material in all leads and lifts. 2nd class deodar wood |
| 31 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete incuding carriage of material in all leads and lifts. |
| 32 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws incuding carriage of material in all leads and lifts. 2nd class deodar wood |
| 33 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters incuding carriage of material in all leads and lifts. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 34 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete incuding carriage of material in all leads and lifts. |
| 35 | 300x16mm |
| 36 | 200x16mm |
| 37 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete incuding carriage of material in all leads and lifts. |
| 38 | 250mmx10mm |
| 39 | 150mmx10mm |
| 40 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete incuding carriage of material in all leads and lifts. |
| 41 | 125mm |
| 42 | 100mm |
| 43 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete incuding carriage of material in all leads and lifts. Single rubber stopper |
| 44 | Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete incuding carriage of material in all leads and lifts. |
| 45 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)incuding carriage of material in all leads and lifts. |
| 46 | 20 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) incuding carriage of material in all leads and lifts. |
| 47 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) incuding carriage of material in all leads and lifts. |
| 48 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer incuding carriage of material in all leads and lifts. |
| 49 | Painting wood work with Deluxe Multi Surface Paint of required shade incuding carriage of material in all leads and lifts. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 50 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 51 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives incuding carriage of material in all leads and lifts. |
| 52 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete incuding carriage of material in all leads and lifts. |
| 53 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan incuding carriage of material in all leads and lifts. |
| 54 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require incuding carriage of material in all leads and lifts. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P.brass pillar taps. |
| 55 | Providing and fixing kitchen sink including making all connections including cost of fittings incuding carriage of material in all leads and lifts. size 600x450x250 mm |
| 56 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete incuding carriage of material in all leads and lifts. Flexible pipe 32mm |
| 57 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.1216 (16 mm OD) pipe |
| 58 | Providing and fixing brass bib cock of approved quality incuding carriage of material in all leads and lifts. 15 mm nominal bore |
| 59 | Providing and fixing uplasticised PVC connection pipe with brass unions incuding carriage of material in all leads and lifts. 45 cm length |
| 60 | Providing and fixing PTMT grating of approved quality and colour incuding carriage of material in all leads and lifts. |
| 61 | Providing and fixing square-mouth S.W.gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300mm size(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design incuding carriage of material in all leads and lifts. |
| 62 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete incuding carriage of material in all leads and lifts. 110 mm X 75 mm |
| 63 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete incuding carriage of material in all leads and lifts. |
| 64 | 75 mm dia. |
| 65 | 110mm dia Please Enable Macros to View BoQ information |
