|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 3 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in-charge. |
| 4 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-incharge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 5 | Dismantling Wash Basin of any size including dismantling of trap, unions, waste coupling, C.P. fittings etc., stacking useful materials within 50m lead and disposal of unserviceable materials into municipal dumps (within 50m) as per direction of Engineer-in-Charge. |
| 6 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineerin-Charge. |
| 7 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 8 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall |
| 9 | Dismantling and removing existing acoustic wall paneling works comprising of fabric covering, internal acoustic infill (Glass wool / Rock wool / Poly-fill foam), plywood backing, and the supporting wooden or aluminum framework/grid. Scope includes: 1. Carefully removing materials without damaging the underlying masonry, adjoining structures, false ceiling, or flooring. 2. Disconnecting and taping off any concealed electrical conduits/wiring found within the paneling. 3. Making good the surface of the wall by filling screw holes and minor patches with POP/Putty to restore the base surface. 4. Sorting and stacking serviceable material (if any) within a lead of 50 meters. 5.Disposal of unserviceable material (malba/debris) to the nearest municipal dumping ground authorised by local bodies. |
| 10 | Dismantling and removing existing acoustic flooring system complete comprising of: Removal of top finish layer(vinyl, timber, carpet etc) , Removal of bonded acoustic underlay(rubber, cork, or foam mats). , Scrapping and cleaning the sub floor surface to remove stubborn adhesive residues, nails, or tack strips to make the surface true and level for new surface. , Stacking of serviceable and disposal of unserviceable material within 50 meters lead as directed by Engineer in charge Note:- Measurement shall be taken for the finished floor area clear of skirting |
| 11 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead |
| 12 | Dismantling of existing G.I ducting including of all insulation material. complete and stacking within 50 metres lead : Mode of Measurement: Perimeter of duct x Length. Note- Client retains the scrap |
| 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 14 | 12 mm cement plaster of mix1:4 (1 cement: 4 coarse sand) |
| 15 | Providing and applying Polymer Modified Cementitious Self-Leveling Screed (Underlayment) to prepare the sub-floor for flooring installation. Specifications: • Thickness: Minimum Average thickness of 3 mm. • Material: Pre-blended, fast-setting, self-smoothing cementitious compound (Mapei, Fosroc OR SikaBOR EQUIVALENT AS APPROVED BY EIC) Base Rate 68/kg . • Compressive Strength: Minimum 25 N/mm² at 28 days. • Primer: Including application of suitable acrylic surface primer to bond with the concrete base and prevent air bubbles Base RAte = 400 / ltr. Scope of Work: Includes mechanical cleaning of base floor (removal of loose debris/paint), filling deep cracks with repair mortar, applying primer, mixing the self-leveling compound, pouring, and spreading with a notched trowel and spike roller to remove air entrapment. |
| 16 | Providing and constructing a raised platform of finished height 300mm over existng brick podium suitable for heavy foot traffic/lecture hall use, comprising of: A. Structural Framework: Fabricating and fixing a rigid metal framework using MS Hollow Square/Rectangular sections (minimum 40x40mm, 2.0mm thick). The grid shall be spaced at not more than 600mm x 600mm c/c both ways, supported on vertical MS legs of suitable height anchored to the floor with base plates and dash fasteners. The entire steel work is to be finished with a coat of Red Oxide Zinc Chromate primer. B. Decking: Providing and fixing 19mm thick BWR (Boiling Water Resistant) grade plywood (IS:303) (Base rate = 1020/sqm)screwed to the metal grid using heavy-duty self-drilling countersunk screws at 200mm intervals. The joints of the plywood shall be flush and level. C. Fascia/Vertical Skirting: Closing the vertical open sides (risers) of the platform with 19mm plywood or similar board to create a closed finish. NOTE- The work includes necessary leveling, packing, cutting for electrical floor boxes etc. as per sanctioned drawings, and preparation of the surface to receive final flooring (carpet/vinyl). Job to be executed complete as per architectural drawings and direction of Engineer-in-Charge |
| 17 | Providing and Fixing Acoustic Carpet Tile Flooring on podium Providing and laying Heavy-Duty Loop Pile Acoustic Carpet Tiles of size 500x500mm of approved design (Base rate = 1305/sqm) as per drawing on the existing plywood platform and cc floor. Specifications: 1. Material: 100% Solution Dyed Nylon / Polypropylene (PP) with tufted loop pile. 2. Backing: Bitumen/PVC or Cushion-back for acoustic insulation (Sound absorption NRC > 0.15). 3. Pile Height: Minimum 3.0mm to 5.0mm; Total Thickness: 6.0mm to 8.0mm. 4. Installation: Fixed to the plywood substrate using approved low-VOC pressure-sensitive adhesive or tackifier (Base rate = 340/kg). Scope Includes: Preparing the plywood surface (sanding joints and cleaning), laying tiles in the approved pattern (monolithic/quarter-turn), and cutting tiles to fit around floor boxes or lectern cutouts. Rate includes all material, labor, wastage, and cleaning of the finished floor. APPROVED MAKE- WELSPUN, MILLIKEN OR EQUIVALENT AS APPROVED BY ENG-IN-CHARGE (EIC) |
| 18 | Providing and fixing Acoustic Modular Carpet Tiles of size 500x500mm for flooring.Specifications:• Yarn: 100% Solution Dyed Nylon 6 or 6.6 (Stain Resistant).• Construction: Tufted Loop Pile / Multi-level Loop Pile.• Pile Height: Minimum 3.0 mm to 4.0 mm.• Total Thickness: Minimum 6.0 mm to 7.0 mm(including backing).• Backing: Cushion/Acoustic backing (Bitumen or PVCfree reinforced fiberglass) for sound absorption (NRC rating ≥ 0.15).• Fire Rating: Class 1 / Bfl-s1 (Fire retardant). (Base rate = 1305/sqm)Scope of Work:Includes thorough cleaning of the sub-floor, applyingpressure-sensitive tackifier adhesive (low VOC) (Base rate = 340/kg), layingtiles in approved pattern (monolithic/quarterturn/brick), cutting tiles at edges/columns, andprotecting the finished floor.APPROVED MAKE- WELSPUN, MILLIKEN OR EQUIVALENT AS APPROVED BY ENG-IN-CHARGE (EIC) |
| 19 | Providing and Fixing LED Anti-Slip Stair Nosing (DownLight Profile)Providing and fixing Architectural Grade Anodized Aluminum LED Stair Nosing profile of size approx.65mm x 35mm tailored for \\"Lights-Out\\" / Downward illumination to prevent glare.Specifications:1. Profile Design: Heavy-duty Extruded Aluminum (Alloy 6063-T5) featuring a protective bullnose edge, atop channel for anti-slip insert, and a recessed/downward-facing LED channel.2. Anti-Slip Infill: High-traction PVC or Ribbed Rubber insert (Black/Grey) securely locked into the top groove.3. Diffuser: Milky/Frosted Polycarbonate (PC) cover for the LED channel to ensure dot-free, uniform lightdiffusion. 4. LED Strip: High-efficiency flexible LED strip (12W/mtr, 120 LEDs/mtr, 3000K Warm White)installed within the profile. (Base rate = 985/m)5. Accessories: Injection-molded end caps and concealed fixing clips/screws.Scope: Installation on the plywood edge using countersunk screws, wiring connection to the nearestloop point, and finishing. (Power Supply/Driver measured separately).APPROVED MAKE- HYBEC, K LITE OR EQUIVALENT AS APPROVED BY ENG-IN-CHARGE (EIC) |
| 20 | Providing and laying Cement Concrete Screed of mix 1:2:4 (1 Cement : 2 Coarse Sand : 4 Stone Aggregate 20 mm nominal size) in flooring to adjust the bed slope towards the drain, laid in panels/required profile. Scope includes: 1. Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer in charge 2. Laying concrete to specified gradient/slope (as directed). 3. Compaction, manual finishing to receive tiles, and curing complete as per direction of Engineer-inCharge.\\" |
| 21 | (Waterproofing wall and floor) Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of bathroom floor and walls upto 300mm height in three coats @10.76 litre/ 10 sqm. One coat of selfpriming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineerin-Charge. |
| 22 | Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.18 mm thick Italian Marble stone slab, Material : Italian Statuario Venatino marbleMake/Importer : R.K. MARBLE , VK Stonex India or equivalentAPPROVED TYPE – BOTTICINO CLASSICO OR EQUIVALENT AS APPROVED BY EICMaterial Specifications:1. Stone: Premium Italian Marble Type: BOTTICINO CLASSICO OR EQUIVALENT - to be selected by Engineer in Charge.2. Thickness: 18mm (±1mm) fully resin-treated and fiberreinforced backing.3. Quality: \\"Selection A\\" Grade; free from cracks, excessive filling, or mineral streaks. Uniform lot color.B. Laying Methodology:1. Sub-base: Preparing the floor surface and laying a 20mm thick average bed of coarse sand and cement mortar (1:4 ratio) leveled perfectly.2. Fixing: Laying the marble slabs on the fresh mortar bed using a slurry of White Cement mixed with Polymer Bonding Agent (Pidilite) to prevent staining. Grey cement is strictly prohibited for fixing.3. Joints: Slabs to be edge-cut/trimmed at site to ensure perfect right angles. Laying to be done with hairline joints.C. Grinding & Polishing (Mirror Finish):1. Grouting: Filling joints with color-matched Tenax filler.2. Grinding: Machine grinding with diamond pads of grit sequences: 60, 100, 200, 400, 800, 1500, 3000.3. Densifier: Application of liquid densifier/sealer during grinding to harden surface.4. Crystallization: Final application of Italian Crystallization powder/liquid and buffing to achieve a high-gloss mirror finish. |
| 23 | Providing and laying Premium \\"Calacatta Gold\\" Italian Marble Flooring (18mm Thick) in Honed Finish ON BATHROOM FLOOR A. Material Specifications: 1. Stone: Premium Italian Calacatta Gold Marble (White base with GOLD VEINS). 2. Format: Large Slabs (Cut-to-size at site). Thickness: 18mm (±1mm) with resin-treated reinforcement. 3. Finish: Factory or Site Honed (Matte/Satin) finish. Surface must be smooth to touch but non-reflective to provide anti-skid properties. Mirror Polish is strictly prohibited. B. Laying Methodology (White Bedding): 1. Sub-base: 40-50mm thick base mortar (1:4 cement:sand mix). 2. Adhesive: Laying slabs using a slurry of White Cement mixed with Polymer Bonding Agent OR High-Performance White Thin-Set Adhesive (Kerakoll/Laticrete).Important: Use of Grey cement is prohibited to prevent discoloration of the white marble. 3. Joints: Slabs to be paper-jointed or with 1mm spacers. Joints filled with color-matched Epoxy Resin. C. Protection: 1. Sealing: Application of 2 coats of Penetrating Impregnating Sealer (Make: Fila MP90 / DuPont) to prevent water/urine absorption. Note:- This item is subject to Rate Adjustment based on Basic Stone Price of ₹1,650/sqft. Material procurement is subject to Engineer's personal approval of the Lot at the vendor's yard. Also, the item description mentions 'Calacatta Gold' as the design intent. The following varieties are also acceptable subject to visual approval:Calacatta Vagli (Warm/Bronze Veins) , Golden Spider (White with Orange/Gold Veins) , Volakas (Gold Selection) Mode of Measurement: Net finished floor area in Square Meters. Rate includes slab cost, cutting, white adhesive bedding, honing, and sealing |
| 24 | Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specificationand also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)Make : GYPROC OR ARMSTRONG OR EQUIVALENT AS APPROVED BY EIC |
| 25 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick(galvanized @ 120 gram per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles |
| 26 | Supply and Installation of Concealed Access Panel (Trap Door) – 600 MM BY 600MMProviding and fixing factory-made, Concealed Type Access Panel (Trap Door) of size 600 X 600 for maintenance access in Gypsum Board False Ceiling.Specifications: Frame: Powder-coated aluminium alloy outer and inner frame with a specialized profile designed to be plastered over, ensuring the frame is invisible after finishing. Infill: 12.5 mm thick Moisture Resistant (MR) Gypsum Board inlay screw-fixed to the inner frame. (BASE RATE 3350 /EACH) Mechanism: Push-to-Open (Touch Latch) system with a safety chain/cable to prevent accidentaldropping during opening. Seal: Integrated dust seal/brush strip to prevent air/dust leakage.Installation: Cutting the required aperture in the false ceiling. Structural Support: Providing additionalindependent support framing using G.I. intermediate channels/ceiling sections suspendedfrom the true ceiling to support the weight of the trap door (Load should not rest on the gypsumboard). Finishing: Jointing the outer frame flange with the surrounding ceiling using jointing compound and paper tape to achieve a seamless, flush finish ready for painting. |
| 27 | (Door chaukhat)Providing and fixing factory made single extruded WPC (Wood Polymer Composite) soliddoor/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws havingminimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and lengthcomplete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Frame size 45 x 85mmAPPROVED Make: CENTURY PLY, GREEN PLASTWOOD OR EQUIVALENT AS APPROVED BY EIC |
| 28 | Supply and Fixing of Dash Fasteners for WPC Frames Providing and fixing 10mm diameter x 100mm long (or suitable length as per site requirement) galvanized mild steel expansion hold fasteners (Dash Fasteners /Anchor Bolts) of approved make (e.g., Hilti / Fischer / Canon / Local Approved) for fixing WPC (WoodPolymer Composite) Door/Window Frames to the masonry/RCC opening |
| 29 | (Door)Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)having minimum density of 650 kg/cum and screw withdrawalstrength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing withstainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 35 mm thickAPPROVED Make: CENTURY PLY, ALSTONE OR EQUIVALENT AS APPROVED BY ENG-IN-CHARGE (EIC) |
| 30 | Making Vision Panel in Existing DoorCutting required opening as per approved drawing in the existing flush door/panel door shutter to required size carefully without damaging the structural stability of the door.Scope includes:1. Framing: Providing and fixing 1st class Teak Wood / Marandi wood beading (moulding) of size 25x15mm on both faces of the door. 2. Glazing: Providing and fixing 6mm thick ClearToughened Glass secured firmly between the beadings. 3. Finishing: Applying clear silicon sealant to gaps and painting/polishing the new wooden beading to match the existing door finish.Rate includes all labor, tools (jigsaw/cutter), materials, and disposal of cut-out waste.APPROVED MAKE- ASAHI, SAINTGOBAIN OR EQUIVALENT AS APPROVED BY ENG-IN-CHARGE (EIC) (BASE RATE 1400/SQM) |
| 31 | Providing and fixing SS Kick Plate (Base Plate)Providing and fixing Stainless Steel (AISI Grade 304)Kick Plate of size 900mm x 200mm (or as per doorwidth) and 1.5mm thickness.Specifications:1. Finish: Satin / Matt finish (Hairline).2. Fixing: Fixed to the bottom rail of the door shutterwith stainless steel countersunk screws.3. Edges: All edges to be machine polished anddeburred (no sharp edges).Rate includes cost of material, screws, labor for fixing,and removing protective film after installation. |
| 32 | Providing and fixing aluminium hanging floor doorstopper, ISI marked, anodised (anodic coating not lessthan grade AC 10 as per IS : 1868) transparent or dyedto required colour and shade, with necessary screwsetc. complete.Twin rubber stopper. Make:La Reliant/Bharat Hardware/Azeen Enterprises/ asapproved by EIC |
| 33 | Providing and fixing aluminium tower bolts, ISI marked,anodised (anodic coating not less than grade AC 10 asper IS : 1868 ) transparent or dyed to required colouror shade, with necessary screws etc. complete:200x10 mm. Make:DORSET, La Reliant/Bharat Hardware/AzeenEnterprises/ as approved by EIC |
| 34 | Providing and fixing chromium plated brass 100 mmmortice latch and lock with 6 levers and a pair of leverhandles of approved quality with necessary screws etc.complete. |
| 35 | Providing and fixing aluminium extruded section bodytubular type universal hydraulic door closer (havingbrand logo with ISi, IS : 3564, embossed on the body,door weight upto 36 kg to 80 kg and door width from701 mm to 1000 mm), with double speed adjustmentwith necessary accessories and screws etc. complete.APPROVED MAKES : DORSET, kitch, ACE HARDWARE OR EQUIVALENT AS APPROVED BY EIC |
| 36 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete.125x85x5.5 mm (heavy type) SPECS. : DORSET, KRISHU, ACE HARDWARE or BENZOVILLE OR APPROVED EQUIVALENT |
| 37 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : as approved by Architect-in-charge (AIC) / Engineer in charge (EIC).250x10 mm SPECS. : DORSET, KRISHU, ACE HARDWARE or BENZOVILLE OR APPROVED EQUIVALENT |
| 38 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. as approved by Architect-in-charge (AIC) / Engineer in charge (EIC).SPECS. : DORSET, KRISHU, ACE HARDWARE or BENZOVILLE OR APPROVED EQUIVALENT |
| 39 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. SPECS. : DORSET, KRISHU, ACE HARDWARE or BENZOVILLE OR APPROVED EQUIVALENT |
| 40 | Providing and fixing surface-mounted Overhead Hydraulic Door Closer of approved make and quality with Bright Brass finish. The closer shall be of Rack and Pinion type with a fully hydraulically controlled closing mechanism.Specifications:Finish: Bright Brass (Body and Arm). Capacity: Suitable for door weight 60 kg to 80 kgand door width up to 1100 mm Features: Two independent regulating valves for controlling Closing Speed (180°–15°) and Latching Action (15°–0°). Capable of 180° opening angle.Installation: To be installed on wood, metal, or aluminum doors/frames using matching brassfinished screws. Scope: Inclusive of all necessary hardware, parallel arm brackets, standard installation tools, adjustment of speed/latching, and scaffolding APPROVED MAKE. : DORSET, KRISHU, ACE HARDWARE or BENZOVILLE OR EQUIVALENT AS APPROVED BY ENG-IN-CHARGE (EIC) |
| 41 | Providing and fixing bright finished brass 70 X 200 X 70 mm cylindrical door lock of approved quality & design with necessary screws etc. complete. as approved by Engineer in charge (EIC).SPECS. : DORSET, KRISHU, ACE HARDWARE or BENZOVILLE OR APPROVED EQUIVALENT |
| 42 | (Window)Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of leadfree uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extrudedprofiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads,interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cutand fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete asper approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 &IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875– Part 3 (ii) Sites with structure height more than 20m for all wind speeds Using R3 series with frame (55 mm & above) x (40 mm& above) & sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Heightupto 1.8m).APPROVED MAKES : FENESTA, REHAU, VEKA OR EQUIVALENT AS APPROVED BY EIC |
| 43 | Providing and fixing 6mm thick Clear Toughened (Tempered) Glass of approved make (Saint-Gobain / Asahi / Modiguard OR EQUIVALENT AS APPROVED BY ENG-IN-CHARGE (EIC)) in existing uPVC window frames/sashes. Scope of Work: Supply of glass with machine-polished edges. Installation into uPVC glazing beads/grooves using existing EPDM gaskets. Application of neutral cure structural siliconesealant (if required for additional weatherproofing). Cleaning of glass surface after installation.Inclusions: All material, labor, transportation, handling, wastage, scaffolding (up to 2 floors), applicable taxes (GST), and labor cess. |
| 44 | Providing and fixing factory-processed, hermetically sealed Double Glazed Insulating Glass Units (DGU)into existing/provided uPVC window sashes/frames. The work includes supplying the glass unit, settingblocks, glazing packers, and necessary neutral cure silicone sealants for weatherproofing. The workincludes the supply of matching uPVC Glazing Beads (Snap-on type) and EPDM Glazing GasketsSpecification of DGU (24mm Total Thickness): 1.Outer Pane: 6mm thick Clear Toughened(Tempered) Float Glass (Saint Gobain / AIS / Modi OR EQUIVALENT AS APPROVED BY ENG-IN-CHARGE (EIC)).2.Spacer/Cavity: 12mm thick aluminum spacer bar filled with moisture-absorbing molecular sieve desiccants (to prevent internal fogging). 3.Inner Pane: 6mm thick Clear Toughened (Tempered) Float Glass.4.Sealing: Dual seal system – Primary seal (Polyisobutylene) and Secondary seal (Polysulphide/Structural Silicone). 5.Measurements: Glass is measured tight inside the frame groove |
| 45 | ROLLER BLINDS: Providing and fixing Fiber Plain Foldable Windows Roller Blinds all complete job as perspecifications & shade as per directions of engineer in charge. Make: Vista material fabric type rollerhorizontal thickness 2mm pattern plain/ as approved by EIC APPROVED MAKES : VISTA MAC OR AS APPROVED BY EIC. (BASE RATE 130/SQFT) Please Enable Macros to View BoQ information |
| 46 | ROLLER BLINDS: Providing and fixing Fiber Plain Foldable Windows Roller Blinds all complete job as perspecifications & shade as per directions of engineer in charge. Make: Vista material fabric type rollerhorizontal thickness 2mm pattern plain/ as approved by EIC APPROVED MAKES : VISTA MAC OR AS APPROVED BY EIC. (BASE RATE 130/SQFT) Please Enable Macros to View BoQ information |
