|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 4 | 250x16 mm |
| 5 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 6 | 75 mm diameter |
| 7 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. |
| 8 | Coupleri) 75 mm |
| 9 | Single tee with doori) 75x75x75 mm |
| 10 | Bend 87.5°i) 75 mm bend |
| 11 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. |
| 12 | On steel work |
| 13 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 14 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 15 | 25 mm nominal dia Pipes |
| 16 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 17 | 40 mm nominal bore |
| 18 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
| 19 | 40 mm nominal bore |
| 20 | Steel work in built up G.I. tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 21 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall : |
| 22 | 40 mm dia. nominal bore |
| 23 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 24 | (a) 150 mm |
| 25 | Providing and fixing 200 GSM anti fungal UV treated poly film approved quality and make, and fixing it on the roof as per the requirement. |
| 26 | Providing and fixing of UV treated 40 mesh insect proof nylon net of approved quility and make, and fixing it on all side of the poly house. As per direction of engineer-in-charge. |
| 27 | Supplying and fixing 100 GSM wooven fabric weedmat black in colour. As per direction of engineer-in-charge. |
| 28 | Supply and fixing of UV treated 80 GSM 50 % green shade net all over the structure including all labour charges etc complete etc complete as per direction of engineer-in-charge. |
| 29 | Supply and fixing aluminium channel with zigzag opening including all labour charges etc complete for tightening the UV film, shade net in insect net etc complete as per direction of engineer-in-charge. |
| 30 | Supply and instalation of 26 LPH jain butterfly mist sprinkler etc complete as per direction of engineer-in-charge. |
| 31 | Supplying,installation and commissioning of 1 HP capacity self priming monoblock pumpset high head ( kirlosker or equivalent make ) with necessary accessories etc complete as per the direction of engineer-in-charge. |
| 32 | Supply and instalation of 25 cum sand filter etc complete as per direction of engineer-in-charge. |
| 33 | Supply and instalation of 12 cum screen filter etc complete as per direction of engineer-in-charge. |
| 34 | Providing and fixing CPVC ball valve of approved quality. |
| 35 | Providing and fixing UPVC Gutter (160 mm x160 mm ) including all necessary accessories as per the direction of the Engineer-in-charge all complete. |
| 36 | Providing and installation of 16 mm LDPE lateral pipe with all fittings and accessories for fixing mist spinkler. |
| 37 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 38 | Providing and fixing CPVC union socket. |
| 39 | 25 mm nominal bore Please Enable Macros to View BoQ information |
