|
| 1 | Supply and installation of jodhpur sand stone (Jodhpur sand stone should be from Balsamand Chopard or Rohila only) chhatri of total height 23' and max width 11' 9\\" and min width 10' 2\\" with pillars, paat, gola, Arch, Chajja, Kadau, dome, Kalash, Kalangi as per detail given below with sizes & numbers work must be as per attached Drawing or approved by Engineer incharge including all labour and machinery charges. |
| 2 | Dasa (Paan Patta) 72'' x 15'' x 6'' |
| 3 | Pillar 72'' x 12'' x 12'' |
| 4 | Pillar Top (Plain Ferma Cutting ) 36'' x 17'' x15'' |
| 5 | Paat (Plain Toda Cutting ) 72'' x 12'' 6'' |
| 6 | Gola on Paat 42'' x 16'' x 6'' |
| 7 | Gola on Paat 29'' x 22'' x6'' |
| 8 | Arch 57'' x 33'' x 4'' |
| 9 | Chajja 35'' x 21'' x 3'' |
| 10 | Chajja 28'' x 16''x 3'' |
| 11 | Chajja 28'' x 12'' x 3'' |
| 12 | Kadau on Chajja 72'' x 12'' x 16'' |
| 13 | Copping on Khadau/ Roof 147'' x 26'' 4'' |
| 14 | Design Taper and Paitam 103'' x 26' x 4'' |
| 15 | Copping on Khadau/ Roof 132'' x 26'' x 4'' |
| 16 | Stone below dome 66'' x 12'' x 12'' |
| 17 | Base of dome 20'' x 9'' x 6'' |
| 18 | Dome 69'' x 18'' 21'' |
| 19 | Kalash 44'' x 44'' x 14'' |
| 20 | Kalangi 30'' x 15'' x15'' |
| 21 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: In cement mortar. |
| 22 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 1: 3: 6 or richer mix. |
| 23 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 24 | Carriage Earth, Sand, Lime, Morrum manure or sludge etc. Elad upto 5 KM |
| 25 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 26 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 27 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 28 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 29 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick . Please Enable Macros to View BoQ information |
