Tender For Repair Maintenace Of Various T/Well/Wss Under Jsv Sub Division Jawali Section Jawali In Tehsil Jawali Distt. Kangra (Hp) (Sh Laying. Jointing And Testing Of Gl Pipe Line 80Mm (M) Rd 0 To 150. 50Mm Dia (M) Rd 130/0 To 460 & 40Mm Dia (L) Rd, Jawali-Himachal Pradesh
TDR : 54917103
Tender Notice
BOQ
5 Days Left
Jawali
Himachal Pradesh
Tender For repair maintenace Of Various T/Well/Wss Under Jsv Sub Division Jawali Section Jawali In Tehsil Jawali Distt. Kangra (Hp) (Sh Laying. Jointing And Testing Of Gl Pipe Line 80Mm (M) Rd 0 To 150. 50Mm Dia (M) Rd 130/0 To 460 & 40Mm Dia (L) Rd
Name of Work:- R/M of various T/well/WSS under JSV Sub Division Jawali section Jawali in Tehsil Jawali Distt. Kangra (HP) (SH Laying. Jointing and Testing of Gl pipe line 80mm (M) RD 0 to 150. 50mm dia (M) RD 130/0 to 460 & 40mm dia (L) RD 150/0 to 130 & 150/0 to 100mtrs for Bye Pass arrangement for improvement of drinking water supply in village Darkati and Providing electric welding of 100mm dia. 65mm & 50mm dia of existing G1 Pipe to avoid the leakage of drinking water in T/Well Darkati)
Sl. No.
Item Description
1
Excavation in foundation and trenches etc. (in pipes and pits) in all kinds of soils such as pick work jumper work blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer -in-charge in all leads and lifts.
2
Providing Laying, jointing & testing in trenches to be levelled to grades, BIS marked GI pipes conforming to BIS:1239 ( latest with up to date amendments ) of 150 mm dia (Medium class PE) duly flanged after every 5th pipe with intermediate butt welded joints including the cost of flanges, bends of required degree, tee/ short pieces made from parent tubes of different degrees cutting , welding & jointing with flanges conforming to table as specified below of BIS:6392 ( latest with up date ammendments ) three layers (two layer out sides and one layer inner side) welded as per BIS:816 ( latest with up date ammendments ) with electrodes conforming to BIS 814 (latest with up date ammendments ) & provided with nuts & bolts BIS 1369 (latest with up date ammendments) of required sizes, 4 mm thick ( Champion make ) compressed asbestos fiber gasket or synthetic rubber gaskets conforming to BIS 2712 (latest with up date ammendments ) & approved specification as per site conditions including flushing, cleaning and hydraulic testing complete to respect with in all leads and lifts as per the direction and satisfaction of the Engineer-in-charge. (The earth work will be measured & paid separately)
3
GI pipe 100mm dia (M) PE Flange Table-5
4
GI pipe 80mm dia (L) PE Flange Table-5
5
Laying ,Jointing and testing in trenches Galvanised Mild Steel tube (L) of following dia including tube fitting complete in all respects with in all lead and lifts as per direction & satisfaction of Engineer - in - charge (earth work in trenches is to be measured and paid for separately).
6
40mm dia (L)
7
Providing and fixing of Cast Iron Sluice valve of following dia ISI marked made Kirlosker PN 1.00 conforming to IS (14846-2000) latest with up to date ammendements, both side flanged T-17 including cutting, welding, gasket sheet 3mm thick champion make nut, bolt complete in all respects with in all lead and lifts as per direction & satisfaction of Engineer - in - charge.
8
40mm dia (L)
9
Providing and fixing G.I. Union of various dia complete in all respects with in all lead and lifts as per direction & satisfaction of Engineer - in - charge.
10
80mm dia
11
Providing electric Welding with superior quality rod of GI pipe of variouys dia at various point to stop leakage including Gernator set hire, cutting of pipe if requirment and making alignment as per site requirment complete in all respect with in all leads and lifts and as per direction and satisfaction of the Engineer-in-charge.(earth work in trenches is to be measured and paid for separately).
12
100mm dia
13
65mm dia
14
50mm dia
15
Making connection from main line to branch distribution line i/c cost of G.I Tee,Elbow, GI Union, Nipple, GI pipe Cutting, welding etc.each work to measure and paid sepertely.
16
80mm dia
17
40mm dia Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
