Supply of floor mounted Electrical Panel, as per detailed specifications in Annexure 1 and enclosed SLDs.Make as per attached approved Panel manufacturer List.
2
ITC of floor mounted Electrical Panel
Installation , testing and commissioning of floor mounted Electrical Panel, as per detailed specifications in Annexure 1 and enclosed SLDs.
3
Supply of GI Strip of 25x5mm size on wall floor recess including connection termination with GI nut
Supply of GI Strip of 25x5mm size on wall/floor/recess including connection termination with GI nut, bolt, spring washer as required (Jointing shall be done by overlapping with 2 sets of brass nut bolt and spring washer spaced at 50mm).Make Reputed.
4
Laying of GI Strip of 25x5mm size on wall floor recess including connection termination with GI nut
Laying of GI Strip of 25x5mm size on wall/floor/recess including connection termination with GI nut, bolt, spring washer as required (Jointing shall be done by overlapping with 2 sets of brass nut bolt and spring washer spaced at 50mm).
5
Supplying 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray
Supplying 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5 percent, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts and nuts, etc. as required.Make Repputed
6
Installing 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray
Installing 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5 percent, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts and nuts, etc. as required.
7
Decommission of existing floor mounted MCC Panel
Decommission of existing floor mounted MCC Panel (1500x1000x300 mm) by disconnecting of the 1 no of Incoming Power cable 35 mm2 and 2 No of outgoing Power cable 3x10 mm2 including removing and shifting of Panel from existing location (Ground floor ) of Canteen to the SCL Store within SCL premises ( approx. 300m distance)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
