|
| 1 | M&L cement concrete in foundations, filling and mass concrete in (Type D2 1:4:8 40 mm graded aggregate). Including demolition of cement concrete complete all as specified and as directed |
| 2 | M and L for PCC (1:2:4) Type B1 using 20 mm graded stone aggregate 150mm thick as in sub bases/floors/pavings etc. laid in beds including finished even and smooth without using extra cement including demolition of cement concrete complete all as specified and as directed. |
| 3 | M&L in repairs for machine pressed precast interlocking paver blocks of any shape and size with grey cement and pigment confirming to IS-1558 -2006 of 100mm thickness M-50 grade including 25 mm thick sand cushion including demolition of old paver block complete all as specified and directed. |
| 4 | M&L for RCC 1:1.5:3 Type A1 as in foundation filling including raft footing,plinth beams and bases of colmns etc. complete all as specified and directed. |
| 5 | Use and waste for formwork to sides of concrete of foundation footing, bases of column, raft and raft beams, sides and soffits (if any) of foundation and plinth beam and similar work for flat and rough finished surfaces etc. complete all as specified and directed. |
| 6 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending pirally for hooping for columns, beams etc. hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 7 | Ditto but 5 mm dia and over upto and including 10 mm dia as in stirrups complete all as specified. |
| 8 | Demolition of brick/stone masonary built in cement mortar including all quoins arches, pillars and precast concrete articles complete all as directed by EIC. |
| 9 | M and L for brick work with old size fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed |
| 10 | M and L walling of random rubble, uncoursed stone masonry, well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and as directed. |
| 11 | All as per item No. 10……………...but for except stone. |
| 12 | M and L for rendering 15mm thick on other than fair faces of brick masonry surfaces in cement mortar (1:4) and finishing the surface even and smooth with out using extra cement complete all as specified and as directed. |
| 13 | M and L for rendering 15mm thick on other than fair faces of stone masonry surfaces in cement mortar (1:4) and finishing the surface even and smooth with out using extra cement complete all as specified and as directed. |
| 14 | M and L for PCC (1:2:4) Type B1 using 20 mm graded stone aggregate 100mm thick as in sub bases/floors/pavings/plinth protection etc. laid in beds including finished even and smooth without using extra cement including demolition of cement concrete complete all as specified and as directed. |
| 15 | M and L forming contraction (Dummy) joints 65mm deep x 10mm wide filled with sealing compound bituminous grade B complete all as specified and as directed |
| 16 | M&L for providing, cement concrete (1:2:4) Type B1 20 mm graded stone aggregate in kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 17 | M & L for Flush pointing in CM (1:3) to random rubble masonry complete all as specified and directed. |
| 18 | M&L preparation of newly plaster surface on external wall surfaces and applying two coats of cement base paint over over a coat of primer complete all as specified and as directed. |
| 19 | M&L taking down the mild steel door of any size PFs or ESHs and repairs required like Straightening bent doors and fixing again including fixing holefast,concreat,greasing, oiling ,Welding, cutting, granding etc. complete all as specified and as directed.. complete all as specified and as directed. |
| 20 | S & F in repairs 1.60 mm thick MS sheet plain black steel door and similar work cut to size, holes, punched including round headed screws with plain 40mm lap joints with riveted or welded seams including bending or turning up mitred angles etc as requried all as directed. |
| 21 | S&F mild steel frame work confirming to FE 290 Gde-E-165, such as grill gratings etc. With ends of bars shouldered and rivetted or forged in to spikes, framed guard bars and similar work complete all as specified and directed. |
| 22 | M & L for painting with two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces or rusted old surfaces in wind ties, sheets etc exc 10cm width or girth including preparation of new or rusted steel surfaces all as specified and directed by EIC. Please Enable Macros to View BoQ information |
