|
| 1 | Taking down cement plastering of any description on brick / stone/ concrete wall / ceiling surfaces of any description incl racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 2 | M & L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of stone/brick masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 3 | M & L for 10mm thick rendering in cement mortar in CM (1:3) on ceiling ((at any surface) finished even and smooth without using extra cement, complete all as specified and directed. |
| 4 | M & L for 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @3% by weight of cement on fair faces of brick/stone work or concrete surfaces, finished even and smooth complete all as specified and directed. |
| 5 | M & L for rough cast plaster over 10mm thick cement plaster in cement mortar 1:4 on stone / brick masonary wall surfaces complete all as specified and directed. |
| 6 | M & L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm average thick wall care putty, complete all as specified and directed. |
| 7 | M & L for preparation of newly plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed. |
| 8 | M & L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of primer, complete all as specified and directed. |
| 9 | Demolition of brick work or stone/boulder masonary built in cement mortar of any specification and in any position complete all as specified and directed. |
| 10 | M & L for brick work with flyash old size bricks, straight or curved on plan exc. 6mm mean radius, built in in cement mortar 1:6.complete all as specified and directed |
| 11 | M & L for walling random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed. |
| 12 | M & L for walling of random rubble (but except stone), uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed. |
| 13 | Demolition of cement concrete (unreinforeced) in ground floors and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and directed |
| 14 | M & L for 75 mm thick PCC 1:3:6 type C2 using (40 mm graded crushed stone aggregate) as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed |
| 15 | M & L for 75mm thick cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed. |
| 16 | Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed. |
| 17 | M & L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exc 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed |
| 18 | All as per item No above but in skirting over 10mm thick screeding in cement mortar 1:4 complete all as specified and directed. |
| 19 | M & L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed |
| 20 | M & L for Glazed ceramic tiles coloured (450x300mm) x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as spd |
| 21 | M & L for vitrified ceramic tiles light shade8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 Sqm, in floor etc set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 22 | M & L for vitrified ceramic tiles light shade 8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and directed. |
| 23 | M & L for 25mm thick PCC 1:2:4 type B-1 (using 20 mm thick crushed stone aggregate) as in sub base complete all as specified and directed. |
| 24 | M & L for chequered cement concrete tiles 25 x 25 cm x 22-25 mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm screed bed in CM mortar 1: 6 complete all as specified and directed. |
| 25 | Taking down old paver block any type any size complete all as specified and directed. |
| 26 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 27 | Refixing 60mm thick factory made cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc.,by table vibratory method & pattern over and including new 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 28 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 29 | M & L for machine cut Kota stone slab flooring 18-20 mm thick over 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. |
| 30 | M & L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & mirror polishing complete all as specified and directed. |
| 31 | M & L for only on old surfaces mirror polishing on marble/granite/kota stone where ever required to give high gloss finish complete all as specified and directed. |
| 32 | Taking down old unserviceable 25mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 33 | S & F in repairs 25 mm bore steel water tubes, medium grade, galvanized with all fittings in short lengths, ISI marked fixed to walls or laying in floors etc complete all as specified and directed. |
| 34 | Refixing old 25mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 35 | Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 36 | S & F for 15mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed. |
| 37 | Refixing old 15mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 38 | Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 39 | S & F for 20mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed. |
| 40 | Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 41 | S & F in repairs grating round 125 mm dia PTMT minimum weight 50 gms fixed to Floor trap/Nahni trap with CM 1:6 etc complete all as specified and directed. |
| 42 | S & F for in repairs 15mm bore cast copper alloy chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 43 | S & F for r in repairs PVC (SWR) floor trap plain with grating incl jointing with solvent cement of 75mm dia. complete all as specified and directed. |
| 44 | S & F for in repair tubular towel rail, chromium plated brass 20mm dia 'D' type 60CM long between flanges complete all as specified and directed. |
| 45 | S & F for Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed |
| 46 | S & F for in repair PVC low level flushing cistern syphonic action type white with inlet ball valve, handle including brackets 10 ltrs capacity etc complete all as specified and directed. |
| 47 | S & F for in repair CP brass shower rose with or without swivel joints 100mm size including fixing to steel pipe or union complete all as specified and directed. |
| 48 | S & F in repairs PVC connections 15mm size with PTMT nuts and bolts of length 450mm etc complete all as specified and directed |
| 49 | S & F for in repair angle valves 15mm bore , cast copper alloy chromium plated fancy type, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 50 | S & F for in repair wash basins vitreous china, white /coloured flat back size 550 x400mm fixed including bracket complete all as specified and directed. |
| 51 | S & F in repairs Squatting pattern Water closet, Orissa pattern of vitreous chinna Size 580x440mm wide with integral foot rest etc complete all as specified and directed. |
| 52 | S & F for repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, etc complete including making goood to floor etc complete all as specified and directed. |
| 53 | S & F in repairs vitreous china One piece EWC with slim soft close seat cover including good making, etc complete including making good to floor etc complete all as specified and directed. |
| 54 | S & F in repair plastic water closet seat cover any colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete as specified and directed. |
| 55 | S & F for in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 56 | S & F for in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 57 | S & F 75mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed. |
| 58 | S & F 110mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed. |
| 59 | S & F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed |
| 60 | S & F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed |
| 61 | S & F for in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed tinned or stainless steel wire staple complete all as specified and directed. |
| 62 | S & F in repair Stainless steel Soap dish, complete all as specified and directed.(Make: Prayag, Cat No BA-15 S and equivlent make) |
| 63 | Dismantling Wall and ceiling boards/wall panelling (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 64 | Providing & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross \\"T\\" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main \\"T\\" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, etc complete all as specified and directed. |
| 65 | S & F for solid PVC wall Lining/wall panelling consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame(including 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame) complete all as specified and directed. |
| 66 | Hacking out old broken glass up to 9.50 m height (any thickness size, quality or description) from steel frames, glazed with putty or fixed with beads complete all as specified and directed. |
| 67 | S & F for 3mm thick plain sheet glass ordinary quality and glazing with oil putty upto 9.50M height in steel shutter in square n.exc 0.50 Sqm in each pane or any steel frame including glazing clips, complete all as specified and directed. |
| 68 | S & F for 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and directed. |
| 69 | Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded pointed in any mortar complete all as specified and directed. |
| 70 | M & L for 18-20 mm thick granite ( of any type ) work (table rubbed and polished) in steps, jambs, pillars window cills, cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 71 | S & F for in repairs sheet glass assembly consisting of 5.5mm thick sheet glass self 12cm wide with chromium plated bracet guard and railing 60cm long complete all as specified and directed. |
| 72 | S & F for for 18mm thick PVC board of one side prelaminated or digital finished and other side plan white colour to make kitchen cabinet shutter/drawaer front shutters complete with and including all fittings as per specifications complete all as specified and directed. Make : Rajshree/Sintex/sunwin/ M/S Kumar Arch Tech Ltd, M/S H2O soultion complete all as specified and directed. |
| 73 | S & F for for 18mm thick PVC board both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete with and inculding all fittings as per specifications, complete all as specified and directed Make : Rajshree/Sintex/sunwin/ M/S Kumar Arch Tech Ltd, M/S H2O soultion complete all as specified and directed. |
| 74 | Refixing shutters of any description n exc 1 sqm each in same opening incl. taking down complete all as specified and directed. |
| 75 | Refixing shutters of any description exc 1.0 Sqm but n. exc 2 Sqm each in same opening incl. taking down complete all as specified and directed. |
| 76 | S & F for in repair Brass CP mixer 15 mm bore dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 77 | M & L in repair 35mm thick Precast Cement Concrete jallies 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate ) set in CM 1:4 complete all as specified.and directed |
| 78 | M & L for in repair aluminium powder coated door frame and shutter including top, bottom/middle rail using glazing clip including rubber head and float glass 6mm thick tinted provided with one floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty fixed to aluminium door and other fittings like handle, locking system, push plate and necessary beading all around the door shutter frame as required for resistance complete all as specified and directed and as per Chief Engineer Drg. |
| 79 | M & L for in repair aluminium powder coated sliding window, ventilator three track including aluminium powder coated decorated grill sliding shutter 5mm thick tinted float glasses, necessary aluminium beadings fittings and other panels to prevent air from out side complete all as specified and directed and as per Chief Engineer Drg |
| 80 | Taking down chowkats with shutter (without taking off shutter from the frame) but n. exc 1.5 Sqm each complete all as specified and directed. |
| 81 | Taking down chowkats with shutter (without taking off shutter from the frame) exc. 1.5 sqm & n. exc 4 sqm each complete all as specified and directed. |
| 82 | S & F for in repair door closure hydraulically regulated designation No-3 universal type suitable for door shutter of 851 to 1000mm in width of aluminium body (die cast) weight between 61 to 80 kg in repair complete all as specified and directed. |
| 83 | S & F in repairs, 25mm dia stainless steel curtain rod heavy duty with a pair of decorative Curtain Finials/ knob & heavy Curtain Support Bracket for rod made of stainless steel, etc. complete all as specified and directed. |
| 84 | S & F for 6mm thick asbestos cement corrugated or semi corrugated sheets in roof fixed with L-type or J-type or cranked hook bolts (including Ridge) including dismantling of old sheet any type complete all as specified and directed. |
| 85 | S & F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws fixed with L & J hooks and washers, in roofs, walls etc with grade of zink coating 275 complete all as specified and directed. |
| 86 | S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 87 | S & F rolled mild steel as in angle setion, fixed indepenntly with or without connecting plates or welding with existing steel or iron surfaces etc and similar work confirming to Gde E-165 (Fe 290) including necessary cutting, welding etc and fixing in position including dismantling of old existing structural steel complete all as specified and directed. |
| 88 | M & L for preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 89 | M & L for washing rubbing down and stopping of old painted surfaces at wall, removing nails, making good holes, making good cracks with putty etc and distempered surfaces of wall and applying one coat of oil bound distemper white or tinted etc complete all as specified and directed. |
| 90 | M & L for washing rubbing down and stopping of old painted surfaces of wall/Jallies, removing nails, making good holes, making good cracks with putty etc and applying one coat of cement base paint at any height etc complete all as specified and directed. |
| 91 | S & F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet uses instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed. |
| 92 | S & F factory made solid PVC moulded door shutter with wood free EPS, 28to30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded Prelam (Nut Brown Colour )PVC sheet on the front face & 2mm Prelam (Nut Brown colour ) PVC sheet on back face, and fixing in the frame at site as per specification and drawings on page 161 of SSR (Part -II) 2010 complete all as specified and directed. |
| 93 | S & F rotational moulded synthetic (HDPE) water storage tank 500 litre capacity hoisted & fixed in position all as specified in SSR Part-I including dismantling of existing old tank complete all as specified and directed. |
| 94 | S& F rotational moulded synthetic (HDPE) water storage tank 1000 litre capacity hoisted & fixed in position all as specified in SSR Part-I including dismantling of existing old tank complete all as specified and directed. |
| 95 | Taking down carefully aluminium/copper point wiring (light,fan,socket or power) of any type complete including fittings and fixtures such as switches,ceiling roses, pendants, holders , sockets, light fittings, removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of walls/ceiling/floor at various site etc, complete all as specified and directed. |
| 96 | M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box and modular white cover plate with frame of suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for the following, complete all as specified and directed: |
| 97 | One light point/bell point/ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch |
| 98 | One 5 pin 5 Amps socket outlet on same board with other switch. |
| 99 | One 5 Pin 5 Amps socket outlet on independent board with other switch |
| 100 | One light point controlled by two, 2-way switches |
| 101 | All as per item No 96.00 above but with 2.5 Sqmm cross sectional area electric cable for 15 Amp socket outlet on independent board, complete all as specified and directed. |
| 102 | M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box 1.2 mm thick with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories for:- |
| 103 | One light point/bell/Fan point controlled by one, one way switch. |
| 104 | One three pin 5 Amp socket on same board with other switches. |
| 105 | One 3 pin 5 Amp socket on independent board. |
| 106 | One light point controlled by two Nos two way switch. |
| 107 | All as per item No.98.00 above but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth. complete all as specified and directed. |
| 108 | S&F switch piano flush type 5 amps, single pole one way 240 volts. complete all as specified and directed. |
| 109 | S&F switch piano flush type 15 amps, single pole one way 240 volts. complete all as specified and directed. |
| 110 | S&F switch piano flush type 5 amps, single pole two way 240 volts. complete all as specified and directed. |
| 111 | S&F bell push piano flush type 5 Amp.complete all as specified and directed. |
| 112 | S&F Socket outlet 3 Pin 5/6 Amp flush type. complete all as specified and directed. |
| 113 | S&F socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type ISI marked complete all as specified and directed. |
| 114 | S&F ceiling fan regulator electronic flush , steped (four step) 230 Volts AC complete all as specified and directed. |
| 115 | S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm. complete all as specified and directed. |
| 116 | S&F in repair of modular switch 1 way 6/10Amp , 1 module, complete all as specified and directed. |
| 117 | S&F in repair of modular switch 1 way 16Amp, 1 module, complete all as specified and directed. |
| 118 | S&F in repair of modular switch 2 way 6 Amp, 1 module complete all as specfied and directed. : |
| 119 | S&F in repair of modular bell push, 6 Amp, 1 module, complete all as specified and directed. |
| 120 | S&F in repair of modular socket 6 Amp, 2/3 pin combined 2 module complete all as specified and directed. |
| 121 | S&F in repair of mdoular socket 6 Amp/16 Amp, 2/3 pin combined 2 module complete all as specified and directed. |
| 122 | S&F in repair modular stepped type ceiling fan regulator, 230 volt AC, 2 module, complete all as specified and directed. |
| 123 | S&F in repair modular TV Socket, complete all as specified and directed. |
| 124 | S&F in repair modular Telephone Socket, complete all as specified and directed. |
| 125 | S&F in repair of door bell electric, ding dong type, AC 230 volts, single phase , complete all as specified and directed. |
| 126 | S&F in repair in repair lamp holder with 9W LED Bulb PVC/polycarbonate type with back plate complete all as specified and directed. |
| 127 | Supply & fix Mirror Light surface/wall mounting LED batten (1200mm) 20 watt 6500 k Triyca is a 20 W three color CCT change LED batten which can change the color of batten from warm white to natural white to cool white with the help of a simple toggle switch. complete with wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified and directed. |
| 128 | Fixing only serviceable light fitting any type and make obtained from sl item No 122.00 above complete all as specified and directed. |
| 129 | Supply & fix Mirror Light surface/wall mounting LED batten (600mm) 20 watt 6500 k warm white/natural white / cool complete with wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified and directed. |
| 130 | S&F in repair in repair wall mounted decorative luminarie fitting alongwith 9/10 Watt LED lamp champagne gold finish fixture with plastic body suitable for B22 Base complete all as specified and directed. |
| 131 | S&F in repair recess/surface mounted OCTANE PLUS LED 2X2 PANEL Light 36 W 6500 K Ultra modern recess mounting luminaire with high performance LEDs White or off white, suitable for mounting with Armstrong/Grid ceiling.including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 132 | S & F in repair surface/Recess mounted LED downlight 18 watt round/Square shaped, Slim surface mounted LED panel with Al.die cast body with minimum system lumen efficacy >120 lumen/watt & total system lumens >2150 with premium diffuser to ensure glare free & even light distribution complete all as specified and directed. |
| 133 | S&F in repair in repair LED light fittings, 10 W bulk head luminaries 230V, 50 Hz complete with all accessories and including connecting up with three core copper conductor cable with suitable size complete all as specified and directed. |
| 134 | S & F in repair Crafted from Aluminum Die Cast with Four-Directional Beam. Its integrated LED ensures long-lasting and energy-efficient with IP65 Protected complete all as specified and directed. |
| 135 | S & F in repair Crafted from Aluminum Die Cast with Two-Directional Beam. Its integrated LED ensures long-lasting and energy-efficient with IP65 Protected complete all as specified and directed. |
| 136 | S&F in repair in repair testing and commissioning energy saving street light luminaire 30 watt LED , pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete, IP 66 protection incl connecting with three core copper flexible wire from ceiling rose to connector of light fitting complete alongwith GI Bracket 1.2 mtr made of GI Pipe 32 mm dia suitable for fixing street light on wall alongwith clamps, nut and bolt complete all as specified and directed. |
| 137 | S&F of sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLS) copper conductor cable of size 6.00 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC non metallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistranded copper conductor cable green colour as earth continuity conductor complete all as specified and directed. |
| 138 | All as per item No 129.00 above but with 4 Sqmm complete all as specified and directed. |
| 139 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections , one twin core cable flat or circular 16 sqmm complete all as specified and directed. |
| 140 | S & F in repair of MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed. |
| 141 | S&F in repair of MCB SPN 10 to 40 Amp capacity, 10KA , 'C' curve complete all as specified and directed. |
| 142 | S&F in repair of MCB SPN 63 Amp capacity, 10 KA , 'C' curve complete all as specified and directed. |
| 143 | S&F in repair of MCB TPN 63 Amp capacity,415 volt complete all as specified and directed. |
| 144 | S&F in repair of MCB TPN 100 Amp capacity, 415 volt, complete all as specified and directed. |
| 145 | S&F in repair in repair MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 8 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. |
| 146 | S&F in repair in repair MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 12 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. |
| 147 | S&F in repair of in repair MCB distribution board triple pole & neutral IP-43 double door metal, 4 way ,415 volt made out of CRCA sheet steel , factory made powder coated with insulated bus bars , shrouded neutral bars, earth bars , made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCB's complete all as specified and directed. . |
| 148 | M & L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note : The unit rate includes for protection pipe and GI wire 4.00 mm from top of earth plate up to 7.5 meter above ground level. Please Enable Macros to View BoQ information |
| 149 | M & L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note : The unit rate includes for protection pipe and GI wire 4.00 mm from top of earth plate up to 7.5 meter above ground level. Please Enable Macros to View BoQ information |
