|
| 1 | Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area. |
| 2 | Providing and fixing oxidised M.S. pressed butt hinges bright finished with necessary screws etc. complete. b)100 x 50 x 1.90 mm |
| 3 | c) 75x47x1.70mm |
| 4 | Providing & fixing ms. Sliding door bolts bright finished or and black enamelled with nuts and screws etc. complete. b)250 x 16 mm |
| 5 | Providing and fixing M.S. door latch with screws etc. complete. b)250 x 20 x 6 mm |
| 6 | Providing and fixing M.S. handles with necessary screws etc. complete. |
| 7 | b) 100mm |
| 8 | c) 75mm |
| 9 | Providing and fixing M.S. tower bolts (barrel type) with necessary screws etc. complete c)150x10mm |
| 10 | d)100x10mm |
| 11 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). a)15 mm outer dia CPVC pipe |
| 12 | b) 20 mm outer dia CPVC pipe |
| 13 | c) 25 mm outer dia CPVC pipe |
| 14 | Providing and fixing ball valve (brass) of approved quality :a)High pressure with P.V.C. floats: 2)20 mm nominal bore |
| 15 | Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. c)1000 lit. capacity |
| 16 | Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993 a)15mm nominal bore |
| 17 | Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make orequivalent. Confirming to IS 8931;1993 a)15mm nominal bore |
| 18 | Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore: c)45 cm (18”) length . |
| 19 | Cleaning of sanitary lines by removing all sludges & proper flushing of sanitary line etc. complete |
| 20 | Cleaning of chambers of the sewage line including refitting the top cover with required cementing etc. complete. |
| 21 | Demarcation of the polling stations 200 meters radious on all the sides of road (including state highway, National Hoghway, internal road, etc.) including all labour, material pint, brushes, holding of tape, vehicle transportation, etc. for the Assembly election 2022. |
| 22 | Providing Bolero/Jeep/Tata Sumo/xylo/Ertiga or equivalent on hire basis |
| 23 | Cleaning of polling booths floor & adjacent rooms for polling staff with required floor cleaning liquid etc complete as per the direction of Engineer - in - charge. |
| 24 | Cleaning of existing water storage tank 500 to 1000lts capacity with required bleaching powder etc. complete. |
| 25 | De-sludging of small size septic tank including dsiposal of sewage by excacating of pit and closing the said property including cleaning of surrounding etc. complete. |
| 26 | Supplying and fixing glass panes with wooden fillets including removal of broken glass panes and old wooden fillet wherever necessary but excluding the cost of wooden fillets. a)Glass panes 2mm thick. |
| 27 | Providing & fixing in position hand rails in staircase, landing and the like with 2\\" dia G.I. pipe (light class) resting on 25 mm (1\\") size M.S. square bars of clear height 90cms placed at 30cm c/c including making necessary hold fast fixture (25 mm square bars 22 cm long) embeded in staircase concrete for resting the M.S. vertical square bars with holding etc. as required for the work including bending hand rail pipe to proper shape in curves with specials etc. complete (measurement will be made along the running length of hand rail). |
| 28 | Providing & fixing Upvc Door Frame Yashashri make or equivalent made out of Upvc extruded multi cavity frame of 60 mm x 60mm x 2mm wall thickness. Frame is reinforced with G.I. Channel & welded in corners with Average weight 0.80 kg per running mtr. These frames are tested by using BS 2782 & DIN 53459 test methods. |
| 29 | Providing & fixing 20 mm door shutter Yashashri make or equivalent, made by using 20mm x 155mm x 1.2mm upvc multi-cavity section and boarder of 30mm x 40mm x 2.5mm Upvc multi cavity section. The corners are joined by inserting polymetric corners & hardware used for fixing the door shutter is stainless steel hinges & S. S. handle & S.S. tower bolt. The average weight of 20mm door shutter is 4.60kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods. |
| 30 | Cleaning of existing W. C. pan and W. C. floor with required disinfected liquid etc. complete. |
| 31 | Providing chemical portable toilet cabins including all arrangements for disposal of solid waste / sewerage & maintaining the toilets cleaning including the cost of men, materials etc complete from 08.04.2026 to 09.04.2026 & taking back after the election including cost of material, labour & transportation. |
| 32 | Providing 500 litres water tank for Portable toilet cabins & taking back after the election including cost of material, labour & transportation. |
| 33 | Providing and fixing 10 litres pvc. Automatic flushing cistern with fittings. |
| 34 | Providing & Fixing Hydraulic door closer for Booth No. 40 |
| 35 | Proving and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 10 litres high level P.V.C. flushing cister (of approved make) with fittings, rack bolts 32 mm diameter P.V.C telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon pull complete cutting and making good the walls and floors where required. |
| 36 | b) Orissa pattern W.C. pan |
| 37 | Providing & fixing foam board with printing details of polling booths at each polling stations as per the directions of Engineer-in-charge |
| 38 | Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead.>With cement mortar 1:4 (1 cement : 4 fine sand) |
| 39 | Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 40 | Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade |
| 41 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete |
| 42 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18 mm series shutters section. (b) Plain glass + Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section. |
| 43 | Supplying of PVC good quality office chairs with arms and dual tone colour of Supreme, Nilkamal & equivalent Please Enable Macros to View BoQ information |
