|
| 1 | B & R Division Items |
| 2 | Demolition cement concrete (un reinforced) of any description in ground floor n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 3 | Demolition of cement concrete(reinforced)of any description & in any position not otherwise specifically provided for complete all as specified |
| 4 | Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles all as specified. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. |
| 6 | Dismantling of fencing wire mesh any type complete all as specified by engineer-in-charge. |
| 7 | Dismantling of post or strut(wood, steel or RCC ) any section ,including taking out embedded in concrete /natural ground and making good distribution ground complete all as directed. |
| 8 | Excavating in post holes (or similar holes ) each n.exc. 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth round in layers n.exc. 25 cm in soft/loose soil complete all as specified & as directed. |
| 9 | M&L for Excavating over areas, n exc 1.5 m deep and getting out in soft soil all as specified and directed |
| 10 | M&L for Excavating over areas, exceeding 1.5m and not exceeding 3.0m deep and getting out in soft soil all as specified and directed. |
| 11 | M&L for Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed |
| 12 | M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.all as specified and directed. |
| 13 | M&L for hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level.all as specified and directed. |
| 14 | M&L for sand filling under floors or in foundations including watering and consolidation.all as specified and directed. |
| 15 | M&L for hardcore of broken stone gauge n exc 63mm, deposited, spread and leveled in layer n.exc 15cm thick, watered and rolled / rammed to a true surface all as specified and directed . |
| 16 | M&L for PCC 1:4:8 type D2 using 40 mm graded broken stone as in foundation, filling and mass concrete complete all as specified. |
| 17 | Material and labour for 75 mm thick Plain Cement concrete type D2 1:4:8 (40mm graded crushed stone aggregates) for sub base in floor fair and rough for receiving tiles all as specified and directed. |
| 18 | Material and labour for 100mm thick Plain Cement concrete type D-2, P.C.C 1:4:8 (40mm graded aggregate) for base in floor fair and even complete all as specified and directed. |
| 19 | M&L for cement concrete 1:3:6 type C2 (40mm graded crushed stone aggregates) in foundation filling and mass concrete complete all as specified & as directed . |
| 20 | M&L for 75mm thick cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection finished even and fair without using extra cement laid in alternate panels and joints filled with bituminous 1 part and 3 part of sand complete all as specified and directed. |
| 21 | M&L for PCC 1:2:4 type B1 with 20mm graded aggregate as in coping, benching incl necessary formwork complete all as specified. |
| 22 | Use and waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and as directed. |
| 23 | Use and waste of Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete all as specified and directed. |
| 24 | S&F Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for columns, hooks ends and binding with Mild steel wire (annealed) not less than 0.90mm dia (or) securing with clips. |
| 25 | S&F Mild steel TMT bars 8mm dia cut to length, bent to shape required as in stirrups, spacers and binders complete all as specified and directed. including cranking, bending spirally for columns, hooks ends and binding with Mild steel wire (annealed) not less than 0.90mm dia (or) securing with clips. |
| 26 | Material and labour for Reinforced Cement Concrete M-25 using 20 mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed. |
| 27 | Material and labour for Reinforced Cement Concrete M-25 using 20 mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 28 | M&L precast reinforced cement concrete slab (1;2:4) type B1 with set in cement mortar (1:6) complete all as specified & as directed Note :-(Reinforcement shall be measured & paid seperately ) |
| 29 | M&L for brick work with sub-class'B' bricks ,straight or curved on plan exc 6m mean radius,built in CM (1:4).all as specified and directed. |
| 30 | M & L for brick work with sub-class'B' bricks ,straight or curved on plan exc 6m mean radius,built in CM (1:4) complete except bricks all as specified and directed.Note : Old bricks obtained from demolition will be used. |
| 31 | M&L for brick work with sub-class'B' bricks ,straight or curved on plan to any radius as in half brick thick walls built in CM(1:4) complete.all as specified and directed. |
| 32 | M&L for rendering 15mm thick plaster in CM (1:4) on fair faces of brickwork or concrete surfaces.all as specified and directed. |
| 33 | M&L in repairs for Non skid ceramic paver tiles area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm (make: endurajohnson,Paver Orient Bell or equivalent in somany ) floor set, jointed &pointed with neat cement slurry with white cement and pigment including 20mm thick screed bedding layer in cement mortar (1:6) all as specified and directed. |
| 34 | M&L in repairs pre polished Chequered cement concrete 22 mm thick & area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors set , jointed & pointed with neat cement slurry with white cement and pigment including 20 mm thick screed bed or bedding layer in cement mortar (1:6) including dismantling of old unserviceable chequered cement concrete tiles all as specified and directed. |
| 35 | Providing and laying in repairs 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed . |
| 36 | M & L in repairs glazed ceramic coloured tiles 450x350x7mm thick as in vertical surfaces such as skirting/dado etc over 10 mm thick cement mortar (1:4) set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of tile complete complete all as specified and directed. |
| 37 | M&L in repairs for 20 mm thick granite (any type) work (table rounded and polished) in steps, jambs pillars and like over and including 15 mm thick cement mortar (1:4) set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of granite all as specified. |
| 38 | M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and directed |
| 39 | M&L for Mild steel angle,flat work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. conforming to Fe -290-GdeE-165 complete all as specified & as directed. |
| 40 | M&L for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and direted. |
| 41 | Supply and fix Steel works in gates and the like using tubular/ square hollow sections and side hung including pintle hinges, stops, hand-made sliding bolts, monkey tail bolts etc. induction butt welded tubes/SHS conforming to IS.1161 - 2014 / IS.4923 - 1997 grade St.-210 complete all as specified and directed. |
| 42 | Supply only MS round plain bars 10 mm dia ( Fe-410W (Gde E-250) Quality -A ) as in tie rod cut to length bend to shape as required for fixing of chain link fencing complete all as specified & as directed. |
| 43 | Supply only 10 mm dia MS screw bolts (machine made ) with hexagonal or square heads at one end & screwed the other or screwed both ends ,each screwed end to be fitted with washers & one hexagonal or square nut length of bolt n exc 5 cm long complete all as specified & as directed. |
| 44 | Supply only chain link MS galvanised fencing complete all as directed. |
| 45 | Fixing chain link fencing incl line wires any mesh size & type to any type of standards rails, straining bolts etc including provision of binding wire complete all as directed. |
| 46 | S&F in repairs for galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing's and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified & as directed (each line wire to be measured). |
| 47 | S&F concertina coil(reinforced punched barbed tape single layer)fixed on'Y' shaped angle over security fencing complete all as specified and directed with followings parameter as given below. 1. Diameter of concertina coil: 600 mm 2. Number of turns in concertina: 50 to 53 turns. 3. Weight of each coil- 9.5 to 10 kg. 4. Coverage per coil- 6 Rm. 5.Central core wire - Made of high tensile spring steel core wire conforming to IS-4454 duly hot dipped galvanized (conforming to IS-2629) with diameter 2.59 + 0.05 mm, UTS 145-160kg/sqmm, zinc coating 250-300 gms/sqm. 6. Strip: Electro galvanised steel strip 0.5mm + 0.02mm thick ,width 19mm (before wrapping on central core wire) conforming to IS 1573 ,zinc coating -120gms/sqm and bituminized dipped ,width of barbes 11.5mm ,pitch of barbes 25.4mm+0.20mm. 7.Clips : AISI 304-1.5mm thick C and U clips.'C' special type for fixing coil and RBT wire joining. 8. No of clips 125 for each coil. 9. Handle and spikes to be provided as required. (Note :- Running length of the fencing shall be measured for payment purpose) |
| 48 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 49 | S&F in repairs high intensity reflective sign boards made of hardened ACP sheet 3 mm thick POP rivetted to sheet frame of hollow tubes ,reflective with wide HIP sheet and overlay film of white/red/yellow /colour as approved with computer cut letters,signs and borders complete all as specified and as directed.(Frame shall be measued & paid seperately under appropriate item) |
| 50 | M&L PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.all as specified and directed. |
| 51 | M&L for two coats of cement based paint over a coat of primer.all as specified and directed. |
| 52 | M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed. |
| 53 | M&L for preparation of new steel surfaces of any description n exc 10 cm in width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed. Please Enable Macros to View BoQ information |
