|
| 1 | Dismantalling of following capacity EA set i/c disconnection of cable, panel, fuel tank , silencer etc complete as required. (a) 15 kva to 40 kva EA set |
| 2 | (b) 62.5 kva EA set in silent canopy up to 50 km |
| 3 | Transportation of following capacity EA set i/c Loading, unloading etc complete as required.(a) 15 kva to 40 kva EA set up to 50 km |
| 4 | (b) 62.5 kva EA set in silent canopy up to 50 km |
| 5 | ITC of following capacity EA set i/c connection of cable, testing on exchange load etc complete as required.(a) 15 kva to 40 kva EA set |
| 6 | (b) 62.5 kva EA set in silent canopy up to 50 km |
| 7 | Servicing of following EA sets i/c replacement of Lube oil, Fuel filter & Lube Oil filter etc,i/c cleaning of EA set, testing complete as reqd. (a) 10 KVA / 15 KVA EA Set (Eicher-322-ES/ ESCORT/ Ashoka Lelyand/ Mahindra etc) |
| 8 | (b) 32.5 /40KVA EA set ( Kirloskar--HA494-Air Cooled) |
| 9 | © 62.5KVA EA set ( Kirloskar--HA494-water Cooled) |
| 10 | (d) Supplying of diesel for testing of EA set etc. |
| 11 | Replacement following faulty parts/ accessories in control panel , connection , testing etc comp as reqd. (a) Battery charger ( Electronic Type) |
| 12 | (b) Electronic Hour Meter |
| 13 | © nON/OFF Key |
| 14 | (d) nCu lead for Battery 12v |
| 15 | (e )AVR for alternator |
| 16 | Battery terminal/ lugs |
| 17 | Supply & fixing of following Lead acid semi-maintenance free battery for EA set i/c first charging etc (make- Exide- GOLD) or similar superior make as per approved list.(a) 12 V, 88/90 AH |
| 18 | (b) 12V, 130 AH Battery (MHD1300 or approved make) |
| 19 | Repairing of following items of EA set i/c replacement of faulty parts ,making connection, testing etc complete as reqd.(a) Starting Self 12v up to 40 kva |
| 20 | (b) Repairing of pump |
| 21 | © Repairing and Cleaning of Engine Radiator up to 62.5 KVA EA Set |
| 22 | Supplying and laying of following size of pvc insulated pvc sheathed 1.1 kv grade Aluminium conductor cable confirming to relevant IS-Specification i/c fixing on wall surface with suitable GI Shaddle /in air a/w GI Wire /in pipe /in recess /ground etc complete as reqd. (Make -Polycab/havells/finolex). (a) 2 x 6 Sqmm weather proof |
| 23 | (b) 4 x 16 Sqmm armoured |
| 24 | S/F of 63 amps four pole off load change over switch in sheet steel enclosure capable of working 415/500 V i/c fixing the same on wall /pole with suitable clamp/fastner i/c drilling hole , making connection, earthing the body etc. complete as reqd. (HPL or SS Make) |
| 25 | S/fixing of wire braded fuel pipe complete for i/c connection, testing etc complete as required |
| 26 | S/fixing of V-Belt for up to 40 kva EA set i/c connection, testing etc complete as required |
| 27 | Disconnection and dismentalling of alternator coupled with 15 KVA EA set i/c disconnection from coupling and cables etc complete as required. |
| 28 | To and fro cartage of faulty 15 KVA alternator from TE Sisendi, Lucknow to workshop i/c loading , unloading etc complete as reqd. |
| 29 | Rewinding of 15 KVA Alternator with suitable size winding wire i/c winding of rotor coil, stator coil and exicetor coil complete with insulation paper, warnish testing etc complete as required. (The old burnt winding wire is handed over to contactor, rate should quote accordingly). |
| 30 | Installation of above alternator after repairing with the existing Engine making coupling, alignment and making all terminations, testing at suitable load for one hour etc complete as required. |
| 31 | Visitng charges i/c to & fro transportation charges of technician on Call basis for DGs repairing in exchanges/BTSs i/c analysis of fault, minor repiring , replacement of faulty items as given in schedule of work etc comp as reqd. (a) Visit Charge per site |
| 32 | Supplying and fixing of 10mm thick bakelite sheet on existing MS frame etc complete as reqd. |
| 33 | Supply & fixing of following items on existing bakelite sheet i/c making connection, testing etc complete as reqd. (a) Kit Kat 100A Porcelain Fuse carrier & Base |
| 34 | (b) Neutral link |
| 35 | Supplying and fixing of 35x35x5 mm angle iron frame suitable for above board i/c cutting, welding, grouting and making good the damages etc complete as reqd |
| 36 | S/F of 63Amp rating TPN main switch in steel enclosure capable of working 415/500 V ,AC 23 Duty i/c drilling hole on the board, making connection, earthing the body etc. as reqd. (M/s HPL / SS approved make) |
| 37 | Dismantling of Electrical installation i/c fitting, fans, fire panel, cable, LT panel, DB's , switch board, glow sign board, conduits & wires etc complete as reqd |
| 38 | Dismantling of MS exhaust pipe 4\\" dia approx 10 mtr of 62.5KVA EA set i/c cutting, etc complete as reqd Please Enable Macros to View BoQ information |
