|
| 1 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.1. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 2 | Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m Morth_301 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 3 | Construction of Embankment with Material Deposited from Roadway Cutting Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Table 300-2. Morth 305 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 4 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 5 | Construction of dry lean cement concrete (DLC) Sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS : 383, the size of coarse aggregate not exceeding 25mm, aggregate cement ratio not to exceed 1 : 1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 Kg/Cum, optimum moisture content to be determined during trial length constructioin, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. as per Technical specification no 601 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 6 | Construction of Cement Concrete Pavement with plain cement concrete pavement over existing surface with approve grade cement @ 400 kg per cum and as per IRC SP-76, coarse and fine aggregate conforming to IS 383, maximum size of fine aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction joint, joint filler, sealant primer, joint sealant, admixtures as approved, curing compound, finishing to lines etc.. and grades drawing Morth as per Technical Specification no 6.6 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR 13.62.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 8 | Providing, Laying and spreading available soil in the sub-grade on a prepared surface pulverising,mixing the spread soil in place with rotavator with 2 Percent slaked lime having minimum content of 70 Percent of CaO, grading with motor grader and compactin with the road roller at OMC to the desired density to form a layer of improved sub grade as per technical specification no 4.02a, 402(Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 9 | Providing and Laying of Rubber Moulded Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 10 | Supplying, fitting and placing HYSD Bar reinforcement complete in sub-structure as per drawing and Technical Specification 10.01 Sch. PWD 502 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 11 | Construction of subgrade and earthen shoulders with approved material obtained form borrowpits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300-2. As per MoRT&H specification No. 305 Sr. No. 3.18 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 12 | Plain cement concrete 1:3:6 nominal mix in foundation Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203days. MORD-11.4(i) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 13 | Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications. As Per MoRT&H 14.06 Or 14.07 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 14 | Structural steel work with riveted,bolted or welded in builtup section, trusses and framed work including cutting, hoisting, fixing in postion and applying a priming coat of approved steel primer all complete As Per DSR 10.20 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) Please Enable Macros to View BoQ information |
