|
| 1 | SCHEDULE 'A' PART-I: B/R WORKS |
| 2 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 3 | S&F 110 mm bore PVC (SWR) bends of any radius with access door |
| 4 | S&F 110 mm bore PVC (SWR) branch piece, Double(Double Y) equal or un equal |
| 5 | S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door. |
| 6 | S&F 110 mm bore PVC (SWR) Soil, waste and Rain water pipes single socketed in any length with rubber ring joints laid in floors or trenches. |
| 7 | S&F 110 mm bore PVC (SWR) Soil, waste and Rain water pipes single socketed in any length with rubber ring joints fixed to walls |
| 8 | S&F 110 mm bore PVC (SWR) Vent cowl |
| 9 | S&F 75 mm bore PVC (SWR) bends of any radius with access door |
| 10 | S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door. |
| 11 | S&F 75 mm bore PVC (SWR) Soil, waste and Rain water pipes single socketed in any length with rubber ring joints laid in floors or trenches. |
| 12 | S&F 75 mm bore PVC (SWR) Soil, waste and Rain water pipes single socketed in any length with rubber ring joints fixed to walls |
| 13 | S&F 75 mm bore PVC (SWR) Vent cowl |
| 14 | S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 450 x 300 mm size with 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including removing the existing Basin, pillar tap and brackets and fixing new brackets complete upto 9th storey. |
| 15 | S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm upto 4th floor complete all as specified and directed. |
| 16 | S&F in repairs Plate racks made out of 0.8 mm thick .stainless steel, of size 750x600x 250 mm all as specified and directed upto 9th floor |
| 17 | S & F in repairs Powder coated fancy type Stainless Steel curtain rod 20mm dia with suitable SS brackets matching to curtain rod of make as approved by GE upto 4th storey complete all as specified and as directed. [ Additional supporting bracket shall be provided if length is exceeding 1.2m and rate quoted shall include for the same ] |
| 18 | S& F in repairs rubber beading 50 mm wide and 5 mm thick upto 9th floor. |
| 19 | S & F in repairs 15 mm bore dia.,fancy type bib tap of PTMT any colour of minimum weight 105 grams, screwed for iron pipe and fixed upto 9th floor complete all as specified and directed. |
| 20 | S & F in repairs Bib taps long body, cast copper alloy, 15 mm dia, chromium Plated, fancy type with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all as specified |
| 21 | S&F in repairs chromium plated brass pillar taps 15mm bore cast copper alloy fancy type complete all as specified |
| 22 | S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified |
| 23 | S&F in repairs angle/stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends all as specified. |
| 24 | Repair to high/low level flushing cistern by adjusting the float valve and stop leakage of PVC connection and PVC/CI bend including replacing of rubber washer, check nuts, etc for any type of flushing cistern all as specified |
| 25 | S&F in repairs PTMT flush handle with adjustable lever and hook for low level flushing cistern all as specified. |
| 26 | S&F in repairs Ball valves 20 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe upto 9th floor |
| 27 | S&F in repairs Ball valves 25 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe upto 9th floor |
| 28 | Removal of air lock/blockage of water in G I Tubing 15/20mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete all as directed |
| 29 | S&F in repairs PVC flexible waste pipe 32/40 mm dia with socket, 100 cm long for WHB/Sink upto 9th floor. |
| 30 | S & F in repairs 15 mm bore dia.,fancy type Pillar tap of PTMT any colour of minimum weight 110 grams, screwed for iron pipe and fixed upto 9th floor complete all as specified and directed. |
| 31 | S & F in repairs 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, complete all as directed. |
| 32 | S&F in repairs wash down water closet(pedestal pattern) of any colour including P or S trap and fixing of bolts complete all as specified. |
| 33 | S&F in repairs flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern |
| 34 | S&F in repairs plastic WC seat cover any colour pedestal pattern, closed pattern with flat bottom and cover and mild steel shromium plated or aluminised hinging devices complete all as specified. |
| 35 | S & F in repairs Vitreous China Squatting pan, Orissa' pattern, size 580 x 440 mm white with integral foot rests confirming to IS 2556 part II of pettern 1 having P trap complete all as specified and directed. |
| 36 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed. |
| 37 | Taking up or down 25/32mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed. |
| 38 | Supplying and laying of 25 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 39 | Supplying and laying of 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 40 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)1000 litres capacity including Dismantling old water tanks and removing to store. |
| 41 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 750 litres capacity including Dismantling old water tanks and removing to store. |
| 42 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity including Dismantling old water tanks and removing to store. |
| 43 | S&F in repairs 25 mm bore gun metal globe or gate valve with iron wheel heads screwed both ends for iron pipe . |
| 44 | S&F in repairs chromium plated grating of size 125mm dia (with hole or without hole) complete all as specified |
| 45 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 46 | M & L in repairs for PVC (SWR) plain Floor/ Nahani trap of 75/110 mm dia., outlet including jointing with solvent cement complete all as specified and directed. |
| 47 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed |
| 48 | 40 mm thick PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) as in floors upto 9th storey complate all as specified and directed |
| 49 | Plain Cement Concrete Type E2 1:5:10 (using 40 mm graded stone aggregate) in sunken floors ,fillling and mass concrete complete all as specified and directed |
| 50 | Rendering 10 mm thick on brick work or concrete surfaces in cement mortar 1: 4 mixed with WPC and finishing the surface even and smooth without using extra cement upto 9th storey complate all as specified and directed (NOTE: Supply only WPC shall be measured and paid separately) |
| 51 | M & L for injecting/ grouting cement slurry mixed with Conbextra EP 10 (Epoxy resin injection grout) of M/s Fosroc Chemicals or equivalent approved chemical in to roof/ sunken slabs of toilet by drilling holes at an interval not more than 1 M c/c to a depth of 60 mm and 20 mm diameter and grouting the slurry by mechanical means with required pressure complete all as per technical specifications and as required at site. |
| 52 | Cutting around existing pipe 100/75 mm dia in brick work including pipe joint and M&L for Cement mortar 1:1 including water proofing compound and curing minimum seven days and after confirming that no leakage and then making good to the entire satisfactation of the Engineer-in-Charge. |
| 53 | S&F in repairs small GI / PPR fittings 15 mm such as socket ,tee elbow, nipple 75mm long ,union and reducer 20x15mm /reducer 20x25mm, tee of unequal size/ Elbow etc (as required at site) all as specified and directed |
| 54 | S&F in repairs small GI / PPR fittings 20 mm such as socket ,tee elbow, nipple 75mm long ,union and reducer 20x15mm /reducer 20x25mm, tee of unequal size/ Elbow etc (as required at site) all as specified and directed |
| 55 | Draining out water from existing water storage tank of capacity nexc 1000 lts and cleaning silt deposited therein, washing out with bleaching powder including taking down connection and refixing |
| 56 | Dismentling of floor hearth or wall tiling of any description including cement mortar bedding (but not backing),removing serviceable tiles to store & rubbish off the premises |
| 57 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:4) for backing of tiles. |
| 58 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0..11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match. |
| 59 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match. |
| 60 | M & L for Coloured Glazed ceramic tiles 300 x 450 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in cement morter (1:4) |
| 61 | M&L for Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, as in floors etc set & jointed in neat cement slurry & pointed in white or Light coloured cement to match including screed bed of 15mm thick in cement mortar 1:6 complete all as specified |
| 62 | Removing existing treatment any type, any thickness and their Roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc. |
| 63 | Brushing neat cement slurry with 3 Kg., of cement per square metre on 9th Storey |
| 64 | Rendering 10 mm thick on concrete surfaces in cement mortar 1:4 mixed with WPC as directed and finished Even and smooth to receive water proof treatment upto 9th floor complete all as specified upto 9th floor.[NOTE: Supply only WPC shall be measured and paid separately] |
| 65 | M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including Applying evenly at tack coat of in dustrial bitumen 85/25 at 1.2 kg/sqm both at bottom and top of the membrane and finally finished with one coat of bitumenous aluminium primer at 100 gm per sqm complete all as specified. |
| 66 | S & F Cement Concrete tiles 250 x 250 x 22 mm thick machine pressed, jointed and pointed with grey cement and no pigment slurry over and including screed bed 20mm thick in cement mortar 1:4 fixing the surface rough so that cement slurry can be absorbed upto 9th storey. |
| 67 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., all as directed by the Engineer in Charge. |
| 68 | M & L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4). |
| 69 | M & L for brick work with fly ash bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6). |
| 70 | Taking down of cement plaster of any description on brick or stone walls,ceiling,chajja,roofprojection etc including raking out joints, hacking for key, scrubbing down with water etc. |
| 71 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement. |
| 72 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished even and fair without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions (WPC shall be measured & paid separately). |
| 73 | Supply only liquid water proofing compound of approved quality. |
| 74 | M&L fo Rendering 5 mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja,roof projection,shelve etc and finished even and smooth without using extra cement. |
| 75 | M&L For supply and application of pre-batched one component Polymer modifiedprotective Mortar(PMPM) of thickness 12-15mm of Sika Top -122 manufactured by M/s Sika India Pvt Ltd or its equivalent in M/s Fosroc Chemicals India (P) Ltd or M/s STP Ltd or M/s Choksey Chemicals Pvt Ltd or M/s Bostik India Pvt Ltd for repair of spalling and damaged concrete in RCC Structure and superstructure works including bond coat manufactured by M/s Sika India Pvt Ltd or its equivalent in M/s Fosroc Chemicals India (P) Ltd or M/s STP Ltd or M/s Choksey Chemicals Pvt Ltd or M/s Bostik India Pvt Ltd or M/s Asian for bonding old and new concrete surfaces, including double scaffolding and safety measures as required and specified necessary tools and machinary, curing, consumables etc. upto 9th floor buildings complete all as per manufacturers instructions as specified and as directed. |
| 76 | Taking down chowkats or frames not exc 1.5 sqm each without taking off shutters from the frame upto 9th floor |
| 77 | Taking down chowkats or frames exc 1.5 sqm but not exc 4 Sqm each without taking off shutters from the frame upto 9th floor |
| 78 | Supply and fixing factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 79 | Supply and fixing factory made uPVC white colour Two track two panels sliding window upto 1.50 m height made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For PVC frame and sash extruded profiles minus 5 % tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 80 | S&F factory made solid fixed ventilator of size 50x47mm made out of extruded 5mm thick PVC sheet mitred cut at two corners and joined with 2Nos of 150mm long brakets of 15x15mm MS square tube, the two vertical porfiles are to be reinforced with 19 x 19 mm MS tube and 50% of portion is fixed with 3 mm thick pin headed/frosted glass and remaining portion is covered with wire mesh and 3 mm thick pin headed/frosted glass louvers including 12mm dia MS guard bars and necessary fixtures upto 9h floor. |
| 81 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing up to 9th floor |
| 82 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. upto 9th floor. |
| 83 | S&F Mild steel butt hinges medium weight 125 mm long upto 9th floor |
| 84 | S&F 150 mm aluminium handles, cast type anodised upto 9th floor |
| 85 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section upto 9th floor |
| 86 | S & F 200 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy upto 9th floor |
| 87 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/stainless steel screws, upto 9th floor all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 88 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws upto 9th floor all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 89 | S & F in repairs Powder coated Aluminium grill of make \\"Deco grill\\" and DG - 104 model with apperture of size 105 x99 mm, suitable ''F'' or ''E'' section fixed to window/ventilator frame for securing Deco grill and interlock and secruing the frame to masonry wall with brass screws upto 9 th storey complete all as specified and directed. |
| 90 | Hacking out old broken glass (any thickness size quality or description) from wooden , steel or aluminium frames glazed with putty or fixed with wooden beads complete all as directed upto 9th floor |
| 91 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares n.exc 0.5 sqm in each pane upto 9th floor |
| 92 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares exc 0.5 sqm in each pane upto 9th floor |
| 93 | S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed upto 9th floor |
| 94 | S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed upto 9th floor |
| 95 | M & L for 12 mm thick prelaminated particle board, interior grade, prelaminated two side with decorative choice lamination both sides for kitchen cuboards complete as directed by Engr-in-charge |
| 96 | M & L for preparation of newly plastered surface and applying two coat of oil distemper emulsion over a coat of alkali resistant primer complete. |
| 97 | M & L for preparation of new external plastered wall surfaces and applying two coats of exterior emulsion weather proof paint [ APEX Ultima or equivalent ] over a coat of primer over the surfaces complete all as specified and directed. |
| 98 | M & L for preparing newly plastered surfaces of ceiling and applying three coats of white wash. |
| 99 | Complete removal of existing treatment and applying two coats of exterior emulsion weather proof coat paint [ APEX Ultima or equivalent ] over a coat of primer on external wall surfaces [ upto 4 th storey ] complete as per manufacturers instructions and all as specified and directed. |
| 100 | Complete removal of existing treatment over wall surfaces applying including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer upto 9 th storey complete all as specified and as directed. |
| 101 | M&L for n exc 3mm thick wall care putty on walls complete all as specified and directed by Engineer-in-charge |
| 102 | M&L preparation of old treated wall surface and applying one coat of oil bound distemper upto 4 th storey complete all as specified and as directed. |
| 103 | M&L preparation of old treated wall surface and applying one coat of Acrylic emulsion upto 4 th storey complete all as specified and as directed. |
| 104 | M&L for preparing old plastered or unplastered surfaces by brooming down and applying one coat of white wash on ceiling |
| 105 | M&L for preparing old plastered or unplastered surfaces by brooming down and applying one coat of white wash on walls complete all as specified |
| 106 | M&L preparation of existing treatment and applying one coat of exterior emulsion weather proof coat paint on external wall /ceiling surfaces [ upto 9 th storey ] complete as per manufacturers instructions and all as specified and directed. |
| 107 | M&L for preparing old painted wooden surfaces over 10cm width or girth and applying one coats of synthetic enamel paint all as specified |
| 108 | M&L for preparing old painted steel surfaces over 10cm width or girth and applying one coats of synthetic enamel paint all as specified |
| 109 | M & L for applying two coat of synthetic enamel paint to old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth including preparation of surfaces all as specified and directed by the Engineer-in-Charge. |
| 110 | Dismantling wrought iron or mild steel work of any description as in barbed wire of etc complete all as directed. |
| 111 | Mild steel Framed work with square / rectangular hollow section, angle iron, MS flat etc such as ornamental grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed. |
| 112 | Excavation in post hole (or similar holes) each n.exc 0.50 Cum getting out returning filling in and ramming earth around in layers n.exc 25cm watering and removed surplus soil to a distance n.exc 50m and making good surface in soft/loose soil. |
| 113 | M&L for cement concrete type 1:2:4, type B-2 using 40mm graded stone aggregate as in post hole all as specified and as directed. |
| 114 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 115 | S & F Pre-painted galvalume aluminum zinc coating GI Based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 116 | S & F Pre-painted galvalume aluminum zinc coating GI Based corrugated steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Please Enable Macros to View BoQ information |
