|
| 1 | Excavation in foundation trenches etc in earth work lift up to 1.50 mtrs stacking the excavated soil not more than 3 mtrs clear from the edge of excavation and then returning the stacked soil in 15 cm layers when required into plinths,sides of foundation etc, consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within a lead of 20 mtrs pick jumper work 50% each. .complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 2 | P/L cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 graded stone aggregate 40 mm nominal size) & curing complete in foundation & plinth..complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 3 | Providing & laying cement concrete 1: 4 :8 (1cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) and curiing complete exeludidng the cost of form work in foundation & plinth..complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 4 | Providing and laying cement concrete 1:6:12 (1 cement :6 sand :12 graded stone agg. 40mm nominal size) On curing complete excluding cost of form work in foundation and plinth complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 5 | Providing and Laying cement concrete 1:5:10(1 cement:5 sand:10 approvedgraded stone aggregate 40mm(Forty milimetres nominal size)with 15% plum and curing compolete excluding the cost of form work in retaining wall/breast wall. The size of plum shall usually 150mm to 300mm as per HPPWD specification complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 6 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm. So as to give fair finish including centring shuttering strtting and proping etc. with wooden battens and balies height of proping and centring below supporing floor to ceiling not exceeding 4mtrs and removal of same for insitu-reinforcred concrete & plain concrete work in |
| 7 | Edge of slab and breaks in floors and wall under 20cm wide.complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 8 | Vertical surfaces such as walls ( any thickness) partitions and like including attached Pillasters,buttresses,plinth and string courses and the like.complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 9 | Sides and sofits of beams, beam haunching, cantilever breasumer and lintles not exceding 1 mtr in depth in all heights from floor complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 10 | Arches exceeding upto 6 metres (six metres) span complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 11 | Flat surface complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 12 | Foundation,footing and bases of colmns complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 13 | Sides and soffits of beams,beam haunching complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 14 | Random reubble masonry / polygonal rubble masonry (uncoursed / brough to courses) with hard stone of approved guality in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement : 6 sand : 12 graded stone aggregate 40 mm nominal size) plinth in level in cement mortor 1:6 (1 cement :6 sand) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 15 | Brick work using common burnt clay building bricks inforcement plinth, insusper structure above plinth level upto floor shevel (2nd class bricks) groved out joint with CM 1:4( (1 cement 4 Sand) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 16 | Brick work using common burnt clay 2nd class building bricks in supper structurs avobe plinth level upto floor two level in cement mortar 1:6 (1 cement :6 sand) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 17 | Steel work welded in build up section, of gate and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paintin grating, framed guard bars ladders, railing brackedts and similar works complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 18 | P/L cement concrete 1:1.5:3 (1cement:1.5 sand:3 graded stone aggregate 20 mm nominal size excluding cost of form work & reinforcement for rcc work in:- |
| 19 | Foundation , foootings base of columns and the like and mass concrete complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 20 | wall any thickness not less than .10 m thickness) attached pilasters,buttresses, plinth and string courses etc. from top of foundation level upto floor two level complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 21 | Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of from work and reinforcement for reinforced concrete work in : |
| 22 | Foundation, footing, basis of columns and the like mass concrete complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 23 | Wall any thickness but not less than 0.10 mtr. Thickness attached pillasters, buttresses,plinth and string courses etc. from top of foundation level upto floor two level complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 24 | Suspended floor ,roofs, landing& shelves & their suport balconies, beams, girders bressumer and cantilevers upto floor two level complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 25 | 15mm thick cement plaster in single coat on rough side of brick /stone /concrete walls for interior plastering upto floor two level I/c arrises, internal rounded angles, chambers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar1:6 (1 cement :6 sand) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 26 | Providing Tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 27 | Hirmachi colour wash on undecorated wall surfaces two coats to give an even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 28 | Applying a priming coat over new steel & other metalled surface & i/c preparing the surface by thoroughly clearing oil, grease & durt & other forgin matter scoured with wire wire brushes fine steel wool srapers & sand paper complete (with ready mixed priming paint bushing red lead red oxide/Zinc oxide chrome) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 29 | Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil dirt grease and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 30 | Painting two coats (Excluding priming coat) over new steel & other than metal surfaces under coat with reday mixed paint brushing to give an evan shed including cleaning the surface of all dirt dust and other foreign matter with white ready mixed paint complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 31 | Painting two coat (excluding Priming coat )on new wood and wood based surface with ready mixed paint brushing to give an even shade I/c cleaning of all dirt dust and other foreign matter, sand papering and stopping with while enamel paint complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 32 | Providing horizontal spindle horizontal split 1 set casing/end suctions (back full out arrangement) single/double/ multistage centrifugal pump or combination of pump in series of recommended make such as Kirloskar make Model No. 50/20 x e Heavy stage- 1 No. as per BIS-1520-1980 with up to date amendments, read with IS: 9137-1978 or latest edition suitable for lifting clear water for under mentioned characteristics with bronze impellers/priming funnels, casing ring and shaft sleeves of bronze, shaft of steel grade EN-8 with cast iron casing coupled directly through a flexible coupling on a MS/Cast steel base plate ( base plate to be from the manufacturers of the pumping unit only) to Squirrel Cage drip proof induction motor of standard make such as Kirloskar/Crompton/NGEF and suitable for operation on 400 (+)/-) 10% volts, 50 cycles/second, 3 phase AC electric supply. The power of electric motor should be at least 10% in excess of the maximum power required by the pump in the operation range of (+) 10% and (-) 15% of the duty point head. The motor should be as per IS: 325-1978 with up to date amendments read with IS: 900-1972. It should include cost of bearing nuts, bolts and pointing etc. and should meet the following requirements:- 1x 5.00 HP working 1x 5.00 HP Nos Stand bye complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 33 | SITE CONDITIONS:- Total Head :- 100 metre |
| 34 | Discharge required from each pump. :- 2.00 LPS |
| 35 | No. of pump required :- 1.00 Sets woking & 1 set Standby |
| 36 | RPM 1440 :- |
| 37 | Rising Main Length 500 Rmt. |
| 38 | Pipe of dia 40mm dia |
| 39 | Supply , Installation, Testing and Commissioning ______HP automatic pannel including auto start, auto stop and restart facility single phase preventer, timer relay, selector switch auto and manually start facility, prevention of phase reversal, imbalance and overload and fixed with compatible starter complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge. |
| 40 | Providing & laying PVC insulated jointless, flat water proof 4 core copper cable 6 mm2 of Siemens/ Finolex /Grandlay / Gloster make conforming to BIS:1554 (Part I)-1988 or latest with up to date ammendments of suitable size for the pump sets offered(one cable carrying all three phases) including all other electrical equipment /accessories such as thimbles,flexible pipe, solder, nuts & bolts cable glands etc. laid in pipes or trenches under floor complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 41 | Providing & fixing of Kirloskar/ Leader make of suitable size cast iron double flanged sluice valve having size of 50mm dia Class PN-1.6 equal to delivery of pump and capable of withstanding nominal seat pressure of 21kg/cm2 as per BIS-4846 (latest additation). complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .50mm dia |
| 42 | Providing & fixing of double flanged cast steel sluice valves of Kartar / Bir make and size 50mm dia, higher than pump for the delivery line of the pump and capable of with standing the normal seat pressure 52 Kg/CM2 (ASA-150) as per BIS 1868 (API-600) with upto date ammendments (latest addition). complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .50mm dia |
| 43 | Providing & fixing of Kirloskar/ Leader / Bir make of cast steel double flanged 50mm dia NRV having Class ASA-150 equal to dia of delivery of pump and capable of withstanding nominal seat pressure of 52kg/cm2 as per BIS-1868/API 6D (latest additation). complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge 50mm dia. |
| 44 | Providing and laying column assembly of GI/MSERW pipes of suitable size for suction delivery and common header considering site requirements and NPSH required/ avaiable.The pipe sizes for suction and delivery shall as per the requirement of offered pump (to be given by the tendrers) and common header shall be equal to dia of rising main including tapers. flanges, bends, rubber gaskets, 3 mm thick nuts and bolts and special up to 5 metre away from the outer wall of pump house as per layout drawing approved by Engineer-in-charge. The pipes material shall conform to relevant BIS codes and capable of with standing field test pressure equal to 1.5 times the operating pressure. The complete arrangement shall comprise of:- a) Suction pipe 40 mm dia of 2X10mtrs. length b) Delivery pipe 80 mm dia of 2X5 mtrs length c) common header 65 mm dia of 5mtrs length.including Prov. & Fixing of GI Pipe and earthing with allied accessories .complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 45 | Transportation and Carriage Charges till siteof work including testing installation and commissioning of above complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge |
| 46 | Prov. & fixing SFRC Man hole cover with frame having frames size of 560 mm internal dia.should not be less than 100 kg complete in all respect to the entire satisfaction of the Engineer-in-charge. |
| 47 | Providing & fixing G.I. Pipe Light grade for inlet/outlet pipe/over flow pipe 65mm dia complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 48 | Providing and fixing brass sluice valve (with hand wheal) as per I S specification 65 mm dia complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 49 | Providing and fixing 65 mm dia double flanged puddle collar for conection with R.C.C.walls complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 50 | Manufacturing, fabrication & fixing of mosquito proof ventilation 800 mm height and 300 mm dia with dome roofing of M.S. sheet 2 mm thick , G.I mesh along circumfrences and suported on 25 x 5 mm thick 3 nos M.S.flat i/c cutting, welding and priming & painting two coats of anamel paint sky blue complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 51 | Finishing wall with weather proofing cement paint( Apex altima) or approved brand and manufacture and of requir-ed shade on undecorated wall surface two coat to give an even shade after throughly brushing. The surface to removal all dirt, dust and removing of loose material complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 52 | Dismentaling roofing including ridges, hips, valleys, gutters, etc. stacking the serviceable material and disposal of uservceable material with n 20 metres lead. A.C Sheet roofing complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 53 | Demolation of Brick work above ground level and stacking the unserviceable material complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 54 | Chiselling /Wedging out of rock where blasting is prohibited complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 55 | Providing and fixing Flanged bell mouth a/w puddle collars complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 56 | 50 mm dia |
| 57 | Providing Laying and jointing & testing of G.I pipe for outlets pipe scour pipe and over flow pipes etc. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . 50 mm dia. |
| 58 | Providing & fixing of Bir make of suitable size cast iron double flanged sluice valve having size of 50 mm dia Class PN-1.6 equal to delivery of pump and capable of withstanding nominal seat pressure of 21kg/cm2 as per BIS-4846 (latest additation). complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .50mm dia |
| 59 | Dismentalled in trenches galvanized mild steel tubes Light class 65mm nominal dia flanged pipe (the earth work to be measured and for separately.) The pipe shall be carred from site of work to Sub Divisional store and staged properly complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 60 | 40mm dia |
| 61 | Re-Laying, jointing and testing in trenches galvanised mild steel tube of light grade screwed and socketed complete including providing and fixing tube fitting such as union, tees, socket etc (excluding cost of earth work in trenches, will be measured and paid for separately.) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 62 | 40 mm dia |
| 63 | 50 mm dia |
| 64 | Welding of galvanised iron pipe of following dia with socketed welding both side at site with welding rods and by selding set (Jointing at leaking point including cutting making tail pipe of required size and dia as per site condition) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 65 | 40mm dia |
| 66 | 50 mm dia |
| 67 | Providing and fixing of G.I. Union heavy duty Bir Make I.S.I. marked complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 68 | 40 mm dia |
| 69 | 50 mm dia |
| 70 | Providing and fixing of G.I.Elbow heavy duty I.S.I. marked complete in all respect within all lead lifts as per the direction of Engineer -in- Charge. |
| 71 | 40 mm dia |
| 72 | 50 mm dia |
| 73 | Providing and fixing of C.I. Gun metal Bronze Peet Valve Bir Make complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 74 | 40 mm dia |
| 75 | 50 mm dia |
| 76 | Providing , Welding & fixing of MS flanges Table-5 to confirming to IS 6392-1971 ( Latest with upto date amendments) of Class/ table specified below i/c cutting of threaded protion and welding both sides of G.I pipe according to relevent BIS standred specification and provided with nuts & bolts of compressed absbestoes fiber rubber gasket conforming to IS 1367-1981 complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 77 | 40 mm dia |
| 78 | 50 mm dia |
| 79 | Wiring for light point/Fan point/exhaust fan /Call bell point with 1.5 sq mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping and earthing the light point with 1.5 Sq.mm HRFLRS/PVC insulated single core copper conductor cable as required :Group C. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 80 | Supplying and fixing Metal Box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 Amps. Socket outlet and 15/16 Amps. Paino type switch, connections, painting etc as required . complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 81 | Providing Wiring for light power plug with 2x2.5 sq.mm PVC insulted heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No. 1.5 Sq.mm HRFLRS/PVC insulated single core copper conductor cable for earthing as required. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 82 | Providing Wiring for light power plug with 2x1.5 sqmm PVC insulted heat resistant flame retardant (HRFLR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No. 4 Sq.mm HRFLRS/PVC insulated single core copper conductor cable for earthing as required. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 83 | Providing Wiring for light power plug with 4x0.75 sq.mm PVC insulted heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 2 No. 4 Sq.mm HRFLRS/PVC insulated single core copper conductor cable for earthing as required. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 84 | Supplying and fixing of bulk head fitting of all sizes and shapes, containing one No. thread type CFL lamp holder (s) complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Bulk head fitting,CFL type (Category-A) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 85 | Supplying and fixing brass batten/angle holder including connections etc as required. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 86 | Providing, installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc.as required : Ceiling Fan 1200mm sweep, Category-A.complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 87 | Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required : Single pole Cat-A. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 88 | Supplying and erection of 3 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required : Double pole Cat-A. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 89 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required. 63 Amps.Cat-A. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 90 | Supplying and fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB) having a sensitivity current up to 300 millampers in the existing MCB DB complete with connections, testing and commissioning etc as required : 63 Amps. Cat-A. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 91 | Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus-bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and power painted, including earthing etc. as required : Single door-12 way complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 92 | Providing and fixing TP&N switch disconnector fuse unit panel mounting, 415/500 volts eith 3 No. HBC/HRC fuses, open execution, including drilling holes in the cubical, making connections, etc. as required : 63 Amp. Category-A. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 93 | Providing and fixing following type of surface mounting decorative mirror optics luminaire with powder coated CRCA sheet steel housing, low glare aluminium mirror reflector, pre wired with 110 V starter & 36/40 w copper ballast for housing CFL (but excluding the cost of CFL), complete with all accessories, connections, testing and commissioning etc. as required: 2x18 watt-CFL (Category-A) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 94 | Providing and fixing of LED Tube choke electronic 18 watt complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 95 | Providing and fixing of lightning tube including LED rod 4' long i/c all accessories 18 watt, complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 96 | Supplying and errection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron (50mmx50mmx6mm thick) with sufficient numbers of horizontal and vertical intermediate members (25mm x 6mm thick ) flat iron including painting and bonding to the existing earth as required complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 97 | Providing and fixing of C.I. Gun metal Bronze Peet Valve Bir Make and as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 98 | 50 mm dia |
| 99 | Stone / boulder filling the inside the intake chamber complete in all respect as per entire satisfaction of Engineer in Charge. |
| 100 | Providing wood work in frames of door, window, clear story window and other frames etc. 2nd Class Deodar wood. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 101 | Providing and fixing Panalled , glazed or panelled and glazed shutters for doors, windows and clerestorey windows I/c black enamelled iron but hin-ges with necessary screws 40mm thick using 2nd class deodar wood .complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 102 | P/F wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56mm for with necessary screws :40mm thick 2nd class Deodar wood :doors, windows and clerestory windows including bright finished black enamelled iron hinges 2nd class Deodar wood. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 103 | Providing and fixing MS grills of required pattern in wooden frames of windows etc. with MS flats, square or rounded Plain grill, Detail of cost for grill 90x120cm= 1.08 Sqm.bars with round headed bolts and nuts or by screrws. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 104 | Providing 40x3 flat iron Hold fast 40 cm long including fixing to frame with 10 mm dial meters bolts and nuts and wooden plug and embeding in cement motor block 30x10x15 cm. (1:3:6 (1cement:3sand:6 graded stone aggregate 20mm nominal size) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 105 | Providing and fixing M.S. fan clamp (type-I of 16mm dial M.S. Bar bent to shape with hooked ends in RCC slab during laying including painting the exposed portion of loop all per standred design complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 106 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matt finish to the surface complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 107 | Providing and fixing anodyzed aluminium sliding door bolt anodized colour and shade with bolt and nuts screws etc. Complete in all respect 250x16mm complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 108 | Providing and fixing aluminium Tower bolts (barrel type) anodized ,transparent or dyed to required colour and shade with screws etx. 200x10mm complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 109 | Providing and fixing aluminium handles 100mm anodized transparent or dyed to required shade with necessary screws complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 110 | Terrazzo tile flooring present terrazzo tiles 20mm thick marble chips of specified size laid in floors tresde of steps and landing on a bed of 25mm average thickness of cement motor 1:6 (1cement: 6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of follwing shades complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 111 | Providing fixing ridges or hips 60cm overall with 62mm thick prepainted steel sheet complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 112 | Providing fixing Prepainted steel sheet roofing 62mm thick including complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 113 | Providing fixing MS BP sheet 1.66mm to 2mm thick in cover board/facia/soffits/celling complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 114 | Providing & fixing of nut and bolt for binding of pumping machinery complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 115 | Supplying hosting streching and holding in postion specified profile wire rops for suspenction bridge including guy rops.complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 116 | Providing & fixing in postion mild steel accessories like clamps sispender rope grips tie bolt with pully etc. along with fixture foe suspention bridge complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 117 | P/L of PVC pipe of 90 mm dia complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 118 | Wire crate of G.I.wire filled with boulders with against the wire ( Boulder filling to be measured and paid for seprately ) G.I.wire 5mm thick corresponding to SWG-6 ( 15cm x 15cm) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 119 | Wire crate of G.I.wire filled with boulders with square cut faces against the wire ( Wire crate to be measured and paid for seprately) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 120 | Providing plinth protection 50mm thick in cement concrete 1:3:6(1cement:3sand:6graded stone aggregate 20mm nominal size) including finishing of the top surface of concrete smooth complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . Please Enable Macros to View BoQ information |
