|
| 1 | Teapoy wooden (1.01 to 1.04) :Removing of old unserviceable wooden part and S&F new part made out of 1st class hard wood (Teak) of size, shape & design as shown on drg including tightening the joints by pinning, screwing, nailing and placing every part intact. All new surfaces shall be finished with two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge.Drg No. : 278, 382 |
| 2 | Side Rail |
| 3 | Front / back rail |
| 4 | L' type bracket of size 75mm X 75mmX20mm fixed with screws |
| 5 | Table 3'x2' with or without drawer (2.01 to 2.08):Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak) of size and shape & design as per drg including tightening the joints by pinning, screwing, nailing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge.Drg No. : 283, 284 |
| 6 | Front/rear rail |
| 7 | Side rail |
| 8 | Middle stiffeners |
| 9 | Side stiffeners |
| 10 | Bottom ply of drawers (commercial ply woods of size 550mm x 310mm x 6mm). |
| 11 | Side members of drawer |
| 12 | L' type bracket of size 75mm X 75mmX20mm fixed with screws |
| 13 | Table 4' x 3' (3.01 to 3.04):Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak) of size and shape as per drawing including tightening the joints by pinning, screwing, nailing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge.Drg No. : FD/MAP-II/-03 |
| 14 | Front/back rail |
| 15 | Side rail |
| 16 | L' type bracket of size 75mm X 75mmX20mm fixed with screws |
| 17 | Table dining 6 person (4.01 to 4.04):Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak) of size and shape as per drawing including tightening the joints by pinning, screwing, nailing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge.Drg No. : FD-239, 269, 273, FD/Map-II/03 |
| 18 | Front/back rail |
| 19 | Side rail |
| 20 | L' type bracket of size 75mm X 75mmX20mm fixed with screws |
| 21 | Table dining 8 person (5.01 to 5.04) :Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak) of size and shape as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge.Drg No. : FD-239, FD-273,FD-376 |
| 22 | Front/back rail |
| 23 | Side rail |
| 24 | L' type bracket of size 75mm X 75mmX20mm fixed with screws |
| 25 | Table writing (6.01 to 6.07) :Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak) of size and shape as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge.all as specified in drg and directed by Engr-in-charge.Drg No. : FD-249, 275 |
| 26 | Front/ back rail |
| 27 | Bottom base of box 18mm thick commercial MDF board (ISI marked) |
| 28 | Back ply box 6mm thick commercial ply (ISI marked) |
| 29 | Front door 18mm pre-laminated MDF board including knob and hinges piano type continuous. |
| 30 | Bottom of drawer 6mm thick commercial ply (ISI marked) of size 600mm x 450mm . |
| 31 | Knobs 50mm of chromium plated of approved coloured and standard quality. |
| 32 | Table 3'x3' (7.01 to 7.03) :Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak) of size and shape as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge.Drg No. : FD-88M, 291 |
| 33 | Front/side rail |
| 34 | L' type bracket of size 75mm X 75mmX20mm fixed with screws |
| 35 | Table Peg (8.01 to 8.05) :Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak) of size and shape as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge.Drg No. : FD-25, 277, 384, 236 |
| 36 | Front rail |
| 37 | Side rail |
| 38 | L' type bracket of size 75mm X 75mmX20mm fixed with screws |
| 39 | PVC Shoes |
| 40 | Table Centre (9.01 to 9.05)Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak) of size and shape as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge.Drg No. : FD-274, 134(M), 235, 267, 393 |
| 41 | Front/rear rail |
| 42 | Side rail |
| 43 | L' type bracket of size 75mm X 75mmX20mm fixed with screws |
| 44 | PVC Shoes |
| 45 | Chair WB (10.01 to 10.07) :Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak) of size and shape as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge.all as specified in drg and directed by Engr-in-charge.Drg No. : FD-285 |
| 46 | Stiffener |
| 47 | Front/Side/ rear rail |
| 48 | Back Support |
| 49 | Front leg |
| 50 | Rear leg |
| 51 | PVC Shoes |
| 52 | Taking out u/s seat of chair WB and S&F new seat of 12mm ply with polyureathene foam 75mm thick moulded with density 40kgs per cum with fibre cloth of approved colour and shade with black PVC beeding including necessary nut bolts and washer |
| 53 | Chair Easy with cusioned (11.01 to 11.08)Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak) of size and shape as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge.Drg No. : FD-358 |
| 54 | Taking out u/s seat of Chair Easy cusioned and S&F new seat 12mm, teak ply with poly urethane foam 75mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer. |
| 55 | Taking out unserviceable back of Chair Easy cusioned and S&F new back 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer. |
| 56 | Stiffener |
| 57 | Front/Side/ rear rail |
| 58 | Back Support |
| 59 | Front leg |
| 60 | Rear leg |
| 61 | PVC Shoes |
| 62 | Sofa Set (12.01 to 12.06)Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak) of size and shape as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge.all as specified in drg and directed by Engr-in-charge.Drg No. : FD-373, 281 |
| 63 | Sides of sofa seat |
| 64 | Bottom / back strips set of sofa setplanks of sofa set |
| 65 | Handle of single seat |
| 66 | Removing the existing u/s cushion and replacing with new 100mm thick cushion of 'cool' foam of 40 density covered with and incl new best quality of tapestry cloth Make - Sleepwell/Kurlon or eqvt, all as shown on drgs and as approved by GE. Note :- Set of 10 cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs 250/mtr |
| 67 | Removing of old unserviceable tapestry cloth from cushion of sofa set and S&F new best quality of tapestry cloth and stitched on cushion with zip pattern with best quality zip removable easy to wash as shown on drawing. Note :- Set of 10 cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs 250/mtr |
| 68 | Table Bed Side (13.00 to 13.02):Removing of u/s part and S&F new part of pre laminated MDF board 18mm thick ISI marked including teak wood edging duly shaped as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.Drg No. : FD-248,FD-276 |
| 69 | Top/middle/bottom shelf |
| 70 | Sides pane including legs |
| 71 | Side board (14.01 to 14.05)Removing of u/s part and S&F new part of pre laminated MDF board 18mm thick ISI marked including teak wood edging duly shaped as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.Drg No. : FD-241, 371, 372 |
| 72 | Back side 6mm thick commercial ply wood (ISI marked) |
| 73 | Shutter fixed with piano type hinges continuous 20mm. |
| 74 | Knobs 50mm chromium plated of approved colour and pattern of standard quality. |
| 75 | Top base |
| 76 | Sides pane including legs |
| 77 | Table dressing (Ladies) :Removing of unserviceable part of furniture and supply and fixing new part made out of MDF board prelaminated duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins including polishing to replaced part of wooden to match with existing part to make the serviceable item and removing existing U/S mirror with ply of table dressing ladies and S/F new mirror 5.0mm thick of clear vision (Make : Modiguard, Saint Gobin or equivalent) with 6mm thick ply fixed at back and Teak ply all three side. Drg No. : FD-251, 378 |
| 78 | Table dressing (Ladies) :Removing of unserviceable part of furniture and supply and fixing new part made out of MDF board prelaminated duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins including polishing to replaced part of wooden to match with existing part to make the serviceable item and removing existing U/S mirror with ply of table dressing ladies and S/F new mirror 5.0mm thick of clear vision (Make : Modiguard, Saint Gobin or equivalent) with 6mm thick ply fixed at back and MDF Board all three side. Drg No. : FD/E6/MAP/16 |
| 79 | Table dressing gents: All as per item No 15 above but Removing existing U/S mirror with ply of table dressing gents and S/F new mirror 5.0 mm thick of clear vision (Make : Modiguard, Saint Gobin or equivalent) with 6mm ply on back .Drg No. : FD-230,379 |
| 80 | Polishing description (for 18.01 to 18.19) :M&L preparation of wooden surfaces by cleaning, scrapping by electric grinder and smoothing of surfaces with sand paper and applying one coat of French polish on the wooden part of furniture. Minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing complete all as specified and directed by Engr-in-charge. |
| 81 | Teapoy woodenDrg No. : FD-278, 382 |
| 82 | Table 3'x2' with drawerDrg No. : FD-284 |
| 83 | Table 3'x2' without drawerDrg No. : FD- 283 |
| 84 | Table dining 4’ x 3’.Drg No. : FD-273 |
| 85 | Table dining 6 person Drg No. : FD-239, 269, 273, FD/Map-II/03 |
| 86 | Table dining 8 personDrg No. : FD-239,FD-273,FD-376 |
| 87 | Table writing Drg No. : FD-249, 275 |
| 88 | Table 3x3 woodenDrg No. : FD-88M, 291 |
| 89 | Table Peg Drg No. : FD-25, 277, 384, 236 |
| 90 | Table Centre Drg No. : FD-274, 134(M), 235,267,393 |
| 91 | Chair WB without armsDrg No. : FD-285 |
| 92 | Bed with plytop Drg No. : FD-246 & 247 |
| 93 | Sofa set 5 seater. Drg No. : FD-281, FD-373 |
| 94 | Sofa set 4 seater.Drg No. : FD-281, FD-373 |
| 95 | Chair dining woodenDrg No. : FD- 228, 262, 270, 279 |
| 96 | Chair easyDrg No. : FD- 201, 229 |
| 97 | Chair writing woodenDrg No. : FD-280 |
| 98 | Replacement of TOP (19.01 to 19.09): Taking out unserviceable top from Tables and S&F new top made out of 18mm thick pre laminated MDF board exterior quality including 4mm thick teak wood edging all around the top duly polished of size as shown on drg and as directed. |
| 99 | Teapoy woodenDrg No. : FD-278, 382 |
| 100 | Table 3'x2' with or without drawerDrg No. : FD-284 |
| 101 | Table dining 4’ x 3’.Drg No. : FD-273 |
| 102 | Table dining 6 person Drg No. : FD-239, 269, 273, FD/Map-II/03 |
| 103 | Table dining 8 person Drg No. : FD-239,FD-273,FD-376 |
| 104 | Table writing Drg No. :FD-249, 275 |
| 105 | Table 3x3 Drg No. : FD-88M, 291 |
| 106 | Table Peg Drg No. : FD-25, 277, 384, 236 |
| 107 | Table Centre Drg No. : FD-274, 134(M), 235,267,393 |
| 108 | Bed with plytop (20.01 to 20.06):Removing the existing unserviceable / broken parts and S&F new part made out of first class hard wood (Teak wood/Bonsum) of size and shape as specified and shown on drgs including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.Drg No : FD-246 & 247 |
| 109 | Head board alongwith the legs |
| 110 | Footboard alongwith the legs |
| 111 | Centre stiffeners |
| 112 | Long rail for size 35x90x1980 mm including 35 mm x 5mm flat iron of mild steel bent to right angles to be provided as directed by Engr-in-charge |
| 113 | Short rail |
| 114 | Removing of existing unserviceable ply wood and S&F new plywood of size 1950X900X12mm commercial BWR Make: Kitply/Century Ply/Archidply. |
| 115 | Recanning description (20.01 to 20.06):M&L Re-canning with plastic cane of 1/2 round 2mm wide & 0.40mm thick, woven and border around and back with 4mm wide of approved quality (white/cream in colour of make -shah/BR Super/Aryan) including removing of old canning, tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. |
| 116 | Chair dining woodenDrg No. : FD- 228, 262, 270, 279 |
| 117 | Chair writing woodenDrg No. : FD-280 |
| 118 | Chair easy seat & backDrg No : FD-201, 229 |
| 119 | Stool dressing CBDrg No : FD-252, 282 |
| 120 | Bin soil linenDrg No : FD-212, 244 |
| 121 | Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ Please Enable Macros to View BoQ information |
