|
| 1 | Repair of under mentioned furniture items of MES pattern viz F/DB/FD/MAP series/TP will be carried out as follows:-(a) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact the entire article with standard workmanship and as directed by GE/Engr-in-Charge.(b) Work will be executed where the furniture exist in different User Units/Md accns of GE (East) Prayagraj including BSO Furniture Yard as directed by Engineer-in-Charge.(c) All Timber shall be of 1st class seasoned hard teak wood free from knots and cracks else specified in drg. |
| 2 | Sofa Set 5 Seater and any type, FD-281(i) Legs/side rails as drg |
| 3 | (ii) Arms as per drg |
| 4 | (iii) Front rails/back rail for Three Seater as per drg |
| 5 | (iv) Front rails/back rail for One Seater as per drg |
| 6 | (v) Bearer/Batten as drg |
| 7 | (vi) Back frame top/bottom for Three Seater as per drg |
| 8 | (vii) Back frame top/bottom/sides for One Seater as per drg |
| 9 | (viii) Cushion complete with 40 density PU foam of size 22”X21”X110mm (Make- Sleepwell (Primo Cool)/ Godrej/ Komfort Universe (Polycool)) with upholstery of tapestry cloth of range not less than Rs. 550/mtr (Sample kept with BSO ) colour and shade & quality and providing a chain best quality (at either of 21\\" side) of make YKK with two runners at both ends as approved by EIC/GE |
| 10 | (ix) Cushion cover of tapestry cloth of range not less than Rs. 550/mtr (Sample kept with BSO) colour and shade & quality and providing a chain best quality (at either of 21\\" side) of make YKK with two runners at both ends as approved by EIC/GE |
| 11 | Sofa Set 5 seater (Any type) TP :- Taking down old cushion and tapestry/rexene and re-upholstery of Sofa complete by tightening of frame by removal of unservicable parts i.e. legs/spring/living cloth/elastic & weldings with new one and S&F new cushion 40 density of required size of Make : Sleepwell/ (Primocool)/ Komfort Universe (Poly Cool) tapestry cloth /Rexine of superior quality as approved by GE/EIC (Sample Kept in BSO Yard, Old Cantt Prayagraj) of rate not less then Rs 800/ RM all as specified). |
| 12 | Table Dressing Ladies with Stool, FD/E6/MAP/07 or any type(i) Cabinet box with partitions with 18 mm thick Prelaminated HDHMR board (Make-Archidply/ Greenply/ Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drg. Back ply shall be 12 mm BWR grade as per drg. |
| 13 | (ii) Top and Bottom with 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drg. |
| 14 | (iii) Shutter with 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau /Pegasus/ Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drg. |
| 15 | (iv) Sides with 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drg. |
| 16 | (v) Drawer made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/ Pegasus/ Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete in front, sides/back shall be of 18 mm thick Prelaminated HDHMR and bottom of drawer shall be 9 mm thick BWR Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 5'' as per sample held in BSO yard be provided in Drawers all as directed by GE/EIC. |
| 17 | (vi) Frame assembly along with Mirrorr 5mm thick (Make-Modiguard/Atul/Saintgobbain) & 6 mm thick Back ply BWR grade as per drg. |
| 18 | (vii) Cushion complete with 40 density PU foam (Make:Sleepwell/ (Primocool)/Komfort Universe (Poly Cool).) with upholstery of tapestry cloth of range not less than Rs. 550/mtr (Sample kept with BSO as approved colur, shade & quality as approved by EIC/GE. as per drg. |
| 19 | (viii) 12 mm thick back ply BWR grade of table dressing box as per drg. |
| 20 | (ix) Cabinet box for stool dressing with18 mm thick Prelaminated HDHMR board (Make-Archidply/ Greenply/ Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drg. Back ply shall be 12 mm BWR grade as per drg. |
| 21 | (x) Repair of Stool dressing and S&F PU foam cushion with 40 Density(Make:Sleepwell/ (Primocool)/Komfort Universe (Poly Cool).) with Tapestry cloth as approved by EIC/GE of rate not less than Rs 550/RM complete as per Drg and as directed by EIC. |
| 22 | (xi) Heavy duty Revolving Nylon double wheels as per drg. |
| 23 | Bin Linen Multipurpose, FD/E6/MAP/09 or any type(i) Cabinet box complete with vertical and horizental partitions made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/ Pegasus/ Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drg. Back ply shall be 12 mm BWR grade as per drg. |
| 24 | (ii) Top and bottom for Cabinet box with 18 mm thick Prelaminated HDHMR board (Make-Archidply/ Greenply/ Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete |
| 25 | (iii) Sides for cabinet box with 18 mm thick Prelaminated HDHMR board (Make- Archidply/ Greenply/ Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/ Pegasus/ Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete all as per drg. |
| 26 | (iv) Cabinet door made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/ Greenply/ Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/ Pegasus/ Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete. SS Piano higes shall be used for fixing. Lock (Make: Hettich/Ebco/Quba) and CP Handle 5'' (Make: Hettich/Ebco/Quba) be provided in Cabinet all as directed by GE/EIC and as per drg. |
| 27 | (v) Drawer made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/ Pegasus/ Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete in front, sides/back shall be of 18 mm thick Prelaminated HDHMR and bottom of drawer shall be 9 mm thick BWR Plywood complete. Telescopic channel (Make: Hettich/ Ebco/ Quba) and CP Handle 5'' as per sample held in BSO yard be provided in Drawers all as directed by GE/EIC. |
| 28 | (vi) Fancy Knob SS CP as per sample held in yard. |
| 29 | (vii) Base Frame structure to be made complete all as specified and as per drg. |
| 30 | (viii) PVC shoe as per sample. |
| 31 | Side Board, FD-26/241 or any type(i) Cabinet box complete with vertical and horizental partitions made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/ Pegasus/ Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drg. Back ply shall be 12 mm BWR grade as per drg. |
| 32 | (ii) Top and bottom for Cabinet box with 18 mm thick Prelaminated HDHMR board (Make-Archidply/ Greenply/ Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete all as per drg. |
| 33 | (iii) Sides for cabinet box with 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete all as per drg. |
| 34 | (iv) Drawer made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau /Pegasus/ Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete in front, sides/back shall be of 18 mm thick Prelaminated HDHMR and bottom of drawer shall be 9 mm thick BWR Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 5'' as per sample held in BSO yard be provided in Drawers all as directed by GE/EIC. |
| 35 | (v) Cabinet door/Shutters made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/ Greenply/ Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete. SS Piano higes shall be used for fixing. Lock (Make: Hettich/Ebco/Quba/ Klazovyn) and CP Handle 5'' (Make: Hettich/Ebco/Quba) be provided in Cabinet all as directed by GE/EIC and as per drg. |
| 36 | (vi) Base Frame structure to be made complete with 25mm dia PVC shoeall as specified and as per drg. |
| 37 | (vii) PVC shoe as per sample. |
| 38 | Table Office Clerk Wooden, FD-321/DB-4120(i) Top shall be made of out of 25 mm thick prelaminated HDHMR of Make: Greenply/ Green panel/ Century ply/ Action Tesa and edges of top around shall be 50 mm of approved shade by GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete , rest all as per drg. |
| 39 | (ii) Repair of Cabinet box with replacement of U/S parts as per drg including CP Handle 4\\" as per sample held in BSO yard as approved by EIC/GE all as per drg |
| 40 | (iii) Repeir of drawers with replacement of U/S parts as per drg including making arrangement for fixing of Telescopic channel (Make: Hettich/ Ebco/ Quba/ Klazovyn) and CP Handle 4\\" as per sample held in BSO yard as approved by EIC/GE , in front, sides/back shall be of 18 mm thick BWR plywood and bottom of drawer shall be 9 mm thick BWR Plywood complete. be provided in Drawers all as directed by GE/EIC. Synthetic Enamel Paint to be applied two coats in all surfaces after applying wooden putty except front of drawers. |
| 41 | (iv) PVC shoe as per sample. |
| 42 | Book Case Wooden FD-237 (i) Cabinet box complete with vertical and horizontal partitions made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/ Pegasus/ Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drg |
| 43 | (ii) Cabinet door with CP fancy knob (Sample kept in BSO yard) made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/ Pegasus/ Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drg. SS Piano higes shall be used for fixing all as directed by GE/EIC. |
| 44 | (iii) Top/bottom/side/back/partition made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/ Greenply/ Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drg |
| 45 | (iv) Base Frame structure to be made complete with 25mm dia PVC shoe all as specified and as per drg. |
| 46 | TABLE DRESSING GENTS WITH MIRROR FD-230 (i) Mirror 5mm thick & 6 mm thick Back ply BWR grade as per drg (make- Modiguard/Saintgobin) |
| 47 | (ii) Frame for mirror assembly, complete as per drg |
| 48 | (iii)Frame for support of Mirror assembly as per drg |
| 49 | (iv) Drawer shall be made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drg |
| 50 | (v) Sides/top/bottom shall be made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/ Greenply/ Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete and as per drg |
| 51 | (vi) 6 mm thick back ply BWR grade of table dressing as per drg |
| 52 | M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of existing polish making surface smooth by sanding and grinding with standard workmanship as directed by EIC to the following furniture articles incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. (i) Sofa Set 5 Seater |
| 53 | (ii) Sofa Set 4 Seater |
| 54 | (iii) Table office Clk Wooden |
| 55 | (iv) Bin Linen Multipurpose, FD/E6/MAP/09 or any type |
| 56 | (v) Side Board FD-26/241 |
| 57 | (vi) Book Case |
| 58 | (vii) Table Dressing Ladies with Stool, FD/E6/MAP/07 or any type |
| 59 | (viii) Table Dressing Gents with mirror FD-230 |
| 60 | Charpoy GI pipe ply top, FD-220(i) Plywood top 12 mm thick of size as per drg, BWR Grade (Make: Century Ply/Greenply/Archidply) as per existing shape and size with shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete and 12mm x 6mm thick 2nd class hard wood beading half round along with the edges duly smoothened of the plywood and rounded at corner fixed with fevicol and headless nails all as directed by Engr-in-Charge. |
| 61 | (ii) Supply and fixing of MS Flat iron of size 40mm x 5mm x 900 mm duly painted with two coat of black colour synthetic enamel paint over a coat of red oxide primer to be welded, over the long rails equal to existing width of Charpoy including drilling holes suitably as directed by Engr-in-Charge. |
| 62 | (iii) Supply and fixing of Long rail of 32 mm dia Medium grade GI pipe including cutting, threading and suitable hole for fixing of plywood complete all as Specified and directed by Engr-in-Charge. (Make of Pipe: Tata/Jindal/ Prakash) |
| 63 | (iv) Replacement of unserviceable short rail from charpoy GI pipe 32 mm dia but \\"except pipe\\" including cutting, threading and suitable holes as required and directed. Note : Pipe shall be used from unserviceable long rail obtained from item No. 62 here in before. |
| 64 | (v) Replacement of unservicable legs from charpoy GI pipe 32 mm dia but except pipe including cutting, threading etc as required and MS plate of 3mm thick and 36mm dia shall be welded to bottom of leg flat iron and clamp 02 Nos for MNF set duly painted with two coats of black paint complete all as specified and directed by Engr-in Chg. Note : Pipe obtained from ser item No 63 above shall be used for this items. |
| 65 | (vi) Supply and fixing of GI Elbow 3 way 32 mm dia medium grade ISI Marked complete all as specified and directed by Engr-in Chg. |
| 66 | (vii) Supply and fixing of Check nuts 32 mm dia complete all as specified and directed by Engr-in Chg. |
| 67 | (viii) Supply and fixing of MS plate of 3 mm thick and 36 mm dia welded to legs of GI Charpoy pipe complete all as specified and directed by Engr-in Chg. |
| 68 | (ix) Welding work wherever required as directed by EIC |
| 69 | Charpoy IP folding, FD-388 (R) (i) Replacement of unserviceable Top with Plywood 8/9 mm thick BWR grade plywood fixed with 50mm long 6mm dia flat head nut , bolts and washers. complete all as specified on drg and as directed. (Make-Archidply /Greenply/ Century) |
| 70 | (ii) Painting frame of the Charpoy folding with two coat of Black paint with spray machine over a coat of red oxide primer of approved quality after preparation of steel surface by grinding welding spot, sanding with sand emery paper and dusting the surface with clean cloth. The Charpoy folding frame shall be made smooth by applying metal putty on etched surface only where required. |
| 71 | (iii) Welding spot work wherever required as directed by EIC. |
| 72 | (iv) Replacement of Unserviceable PVC shoes with best quality inner shoe height 30mm shall be provided to legs of charpoy complete all as specified and as directed by EIC/GE. |
| 73 | Table Bed Side FD/(MAP), FD-276/248 FD/E6/MAP/15(R) (i) Top made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/ Pegasus/ Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete, rest all as per drg. |
| 74 | (ii) Sides made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/ Pegasus/ Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete, rest all as per drg. |
| 75 | (iii) Back of 6 mm thick ply BWP grade plywood (Make: Greenply/ Archidply/ Century ply) shall be used as per shape and size shown in drg. |
| 76 | (iv) Drawer Large made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg. sides/back shall be of 1mm thick prelaminated HDHMR Board and bottom of drawer shall be 9 mm thick BWR Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 4\\" (Make: Hettich/Ebco/Quba) be provided in Drawers all as directed by GE/EIC and as per drg. |
| 77 | (v) Drawer Small made of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg. sides/back shall be of 1mm thick prelaminated HDHMR Board and bottom of drawer shall be 9 mm thick BWR Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 4\\" (Make: Hettich/Ebco/Quba) be provided in Drawers all as directed by GE/EIC and as per drg. |
| 78 | (vi) Welding work wherever required as directed by EIC. |
| 79 | (vii) PVC shoe as per sample. |
| 80 | (viii) Removal of old paint by scrapping and prepration of surface smooth by a coat of red oxide peimer applying putty and two coats of paint 1st quality of approved shade over a coat of red oxide primer all as per specification. |
| 81 | Table 3'x2' with and w/o drawer & Table 3'x3', FD-1008/1007/1009 or any type(i) Top 18 mm thick of size 3'x2' made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg. |
| 82 | (ii) Top 18 mm thick of size 3'x3' made out of 18 mm thick Prelaminated HDHMR board (Make-Archidply/Greenply/Century/ Action tesa) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with edge bander machine with autolipped throughfeed CNC machine shall be fixed alround complete,rest all as per drg. |
| 83 | (iii) Repairs to Drawer by replacing old u/s parts with new parts and providing roller bearing including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg. |
| 84 | (iv) Lock of drawer as per drg Make : Godrej/Link/EBCO |
| 85 | (v) MS section any member as per drawing. |
| 86 | (vi) Rubber shoe std quality as per drg |
| 87 | (vii) Welding wherever required as directed by E-in-charge |
| 88 | (viii) Removal of old paint by scrapping and prepration of surface smooth by a coat of red oxide primer applying putty and two coats of paint 1st quality of approved shade over a coat of red oxide primer all as per specification. |
| 89 | Looking mirror of size 5'x1.5' x 8 mm thick duly beveled all around the edge and fixing the 08 Nos predrilled hole with spacers as per sample held with BSO yard Make : Modiguard/Saint Gobbin |
| 90 | S&F of coloured Glass 12 mm thick duly beveled all around the edges for Table Exexutive and side unit, all as directed by GE/EIC. Please Enable Macros to View BoQ information |
