|
| 1 | Subwork No -1 Feeder Bay |
| 2 | Supplying and erecting distribution class, 11 kV thyrite type lightening arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA |
| 3 | Supplying and erecting 11 KV Isolators with EB (800 A) |
| 4 | Supplying and erecting 11 KV Isolators without EB (800 Amp.) |
| 5 | Supplying and erecting 11 KV VCB 400 A Outdoor Type |
| 6 | Supplying and erecting 11 KV CT 400 - 200 / 5 - 5 Outdoor Type |
| 7 | Supplying and erecting C&R Panel for 11 kV Outgoing Feeder OD |
| 8 | Supplying and erecting Structure, cables, clamps, painting etc.as per specification |
| 9 | Supplying and erecting Marshalling Box |
| 10 | Supplying and erecting Earthing as per Sheet |
| 11 | Subwork No -2 - 33 KV Line |
| 12 | Supplying and erecting AAAC 232 mm2 |
| 13 | Supplying and erecting rolled steel joist (girder) pole 152 x 152 mm (37.1kg/m) with base plate in provided foundation as per specification no. OHPL/RSJ |
| 14 | Supplying and erecting G.I.Channel 100x50x6mm |
| 15 | Supplying and erecting G.I.Angle 50x50x6mm |
| 16 | Supplying and erecting G.I Flat 50x10 mm |
| 17 | Supplying and erecting MS Channel 100x50x6 mm |
| 18 | Supplying and erecting MS angle 50x50x6 mm |
| 19 | Supplying and erecting M.S. Flats(50 X 10mm) |
| 20 | Supplying and erecting 33 kv guarding channel MS100x50 |
| 21 | Supplying and erecting porcelain pin type insulator with GI pin suitable for 33kV line, complete as per specification no. OH-INS/PN |
| 22 | Supplying and erecting porcelain disc type insulator 70 KN with necessary hardware suitable for 33kV line complete as per specification no. OH-INS/DI |
| 23 | Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height with anchor plate 300x300x6 mm., straining screws, G.l. stay wire 7/8 SWG, G.l. stay rod 20mmx1.8m length and pole clamps duly erected in provided cement concrete foundation complete. |
| 24 | Providing pipe type earthing with 40mm. dia. G.I. pipe or 20mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP |
| 25 | Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/conduit with screws complete. |
| 26 | Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75 mm. firmly fixed on provided angle supports with necessary materials complete. (6.044 meters/kg.) |
| 27 | Supplying and erecting GI sheet 1.6 mm (16 SWG) caution board of size 200 x 150 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for medium voltage (415 Volt) installation with compliance to IS 2551-1982 |
| 28 | Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles) |
| 29 | Supplying and erecting Sundries |
| 30 | Supplying and erecting Sleve Joints |
| 31 | Making cement concrete foundation including excavation (60 x 60x150) cm x deep in 1:3:6 cement concrete 20 x 25 mm stone metal with necessary curing and finishing complete (for stay) |
| 32 | Subwork No -3 - 11 KV Line |
| 33 | Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg/m) with base plate in provided foundation as per specification no. OH-PL/RSJ |
| 34 | Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg/m) with base plate in provided foundation as per specification no. OH-PL/RSJ |
| 35 | Supplying and erecting 11 kv guarding channel MS 75x40mm |
| 36 | Supplying and erecting V cross arm with ISM channel of 75x40x6mm for 11kV HT OH line with arrangement to fix insulator at 45mm from the end & horizontal distance between insulators 1220mm bent at angle of 60 degree keeping base 305mm and the total vertical height of V cross arm as 460mm, and fixed on pole with MS clamp of 80x10 mm, nut bolts, washers complete as per specification no. OH-PL/VCA |
| 37 | Supplying and erecting 11 KV Top fitting with clamp |
| 38 | Supplying and erecting M.S.Channel 75x40x6 mm |
| 39 | Supplying and erecting MS angle 50x50x6 mm |
| 40 | Supplying and erecting M.S. Flats(50 X 10mm) |
| 41 | Supplying and erecting G.I.Nut Bolts |
| 42 | Supplying and erecting porcelain pin type insulator with GI pin suitable for 11kV line, complete as per specification no. OH-INS/PN |
| 43 | Supplying and erecting porcelain disc type insulator 45KN with necessary hardware suitable for 11kV line, complete as per specification no. OH-INS/DI |
| 44 | Supplying and erecting AAAC 100mm2 Conductor |
| 45 | Supplying and erecting Sleve Joints |
| 46 | Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height with anchor plate 300x300x6 mm., straining screws, G.l. stay wire 7/8 SWG, G.l. stay rod 20mmx1.8m length and pole clamps duly erected in provided cement concrete foundation complete. |
| 47 | Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no.EA-EP |
| 48 | Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75 mm. firmly fixed on provided angle supports with necessary materials complete. (6.044 meters/kg.) |
| 49 | Supplying and erecting GI sheet 1.6 mm (16 SWG) caution board of size 200 x 150 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for medium voltage (415 Volt) installation with compliance to IS 2551-1982 |
| 50 | Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles) |
| 51 | Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/conduit with screws complete. |
| 52 | Supplying and erecting Sundries |
| 53 | Supplying and erecting Wedge connectors DOG TO DOG or equivalent AAAC |
| 54 | Supplying and erecting 11 KV Feeder Pillar 4 Way |
| 55 | Making cement concrete foundation including excavation (60 x 60x150) cm x deep in 1:3:6 cement concrete 20 x 25 mm stone metal with necessary curing and finishing complete (for stay) |
| 56 | Subwork No -4 - 11 KV Cut Point |
| 57 | Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 185 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT |
| 58 | Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 59 | Providing and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT |
| 60 | Supplying and erecting Sand |
| 61 | Supplying and erecting Misc. for XLPE U/G Cable |
| 62 | Supplying and erecting rolled steel joist (girder) pole 152 x 152 mm (37.1kg/m) with base plate in provided foundation as per specification no. OHPL/RSJ |
| 63 | Supplying and erecting M.S. Flats(50 X 10mm) |
| 64 | Supplying and erecting MS Channel 100x50x6 mm |
| 65 | Supplying and erecting M.S.Channel 75x40x6 mm |
| 66 | Supplying and erecting MS angle 50x50x6 mm |
| 67 | Supplying and erecting porcelain disc type insulator 45KN with necessary hardware suitable for 11kV line, complete as per specification no. OH-INS/DI |
| 68 | Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height with anchor plate 300x300x6 mm., straining screws, G.l. stay wire 7/8 SWG, G.l. stay rod 20mmx1.8m length and pole clamps duly erected in provided cement concrete foundation complete. |
| 69 | Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP |
| 70 | Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/conduit with screws complete. |
| 71 | Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75 mm. firmly fixed on provided angle supports with necessary materials complete. (6.044 meters/kg.) |
| 72 | Supplying and erecting GI sheet 1.6 mm (16 SWG) caution board of size 200 x 150 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for medium voltage (415 Volt) installation with compliance to IS 2551-1982 |
| 73 | Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles) |
| 74 | Supplying and erecting 11 kV outdoor type gang operated air break, triple pole switch 400 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of \\"C\\" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp. |
| 75 | Supplying and erecting M.S. Flats(50 X 10mm) |
| 76 | Supplying and erecting M.S.Channel 75x40x6 mm |
| 77 | Supplying and erecting Sundries |
| 78 | Making cement concrete foundation including excavation (60 x 60x150) cm x deep in 1:3:6 cement concrete 20 x 25 mm stone metal with necessary curing and finishing complete (for stay) |
| 79 | Subwork No -5 - Metering |
| 80 | Supplying, erecting, testing and commissioning 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 10/5A to 50/5A, VA10 or 15, Class 0.5S, epoxy casted 3 nos. PT having ratio 11000/V3/110/V3 VA 50, Class 0.5 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation. |
| 81 | Supplying & Erecting Plinth, Meter Shade and fencing etc |
| 82 | Supplying and erecting distribution class, 11 kV thyrite type lightening arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA |
| 83 | Supplying and erecting HT Earthing Set for 11 KV Metering KIOSK |
| 84 | Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. |
| 85 | Supplying and erecting Sundries Such as nut boalts ,washers etc Please Enable Macros to View BoQ information |
