|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or leaner mix (i/c equivalent design mix) |
| 3 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) |
| 5 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) |
| 6 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.15 mm nominal outer dia Pipes |
| 7 | Providing and fixing high pressure PVC (finolex) Type 'B' and socket watse and ventilating pipe icluding with approve dadhesive complete. 75 mm nominal inner dia Pipes |
| 8 | Providing and fixing high pressure PVC (finolex) Type 'B' and socket watse and ventilating pipe icluding with approve dadhesive complete.100 mm nominal inner dia Pipes |
| 9 | Providing and Fixing PVC floor trap ISI marked of self cleansing design complete 110mmx90mm |
| 10 | Providing and fixing PVC plain bend ISI marked ISI marked including fixing with approved adhesive etc complete. 75 mm dia |
| 11 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm. |
| 12 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x1200 mm. |
| 13 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 14 | Extra for pre finished nosing to treads of steps of marble stone. |
| 15 | Providing and fixing ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) 9mm Thick |
| 16 | Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) |
| 17 | Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete). |
| 18 | Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete.transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. |
| 19 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 200 mm ESS ESS made (doors and windows) |
| 20 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type) |
| 21 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.35mm thick. 2nd class deodar wood. |
| 22 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work |
| 23 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 24 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 25 | Providing & fixing 3 mm thick laminated Aluminium Composite Panell (ACP SHEETS) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. |
| 26 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up tandard tubular sections/ appropriate Z sections and ther sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 27 | P/F PVC waste pipe for basin or sink 32mm dia |
| 28 | P/F C.P. Waste for basin 32mm viking made |
| 29 | Providing and fixing wash basin with C.I. brackets, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Cat No. 10098 made Hindware |
| 30 | Providing and fixing water closet squatting pan (Indian suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) hindware made cat No 92048 OPC Aspiro 220/ \\"p\\" s white |
| 31 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 450x600 mm bowl depth 200 mm |
| 32 | Providing and fixing ESS ESS soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. ESS ESS AC 303 |
| 33 | P/F ESS ESS Angle cock cat no. PT04A ESS ESS |
| 34 | Providing and fixing Steel wired connection pipe: 60 cm length 15 mm nominal bore viking made |
| 35 | P/F ESS ESS Sink mixture CAT T-107 |
| 36 | P/F ESS ESS Center hole basin mixture PT21-SLBM W/O PWS ESS ESS |
| 37 | Providing and fixing towel road complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. ESS ESS made AC-301 |
| 38 | Providing and fixing towel ring complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. ESS ESS made AC-302 |
| 39 | Providing and fixing 460x130x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. AC-307 |
| 40 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Cat no. 11032 |
| 41 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing rectangular in shape 60cm x 45cm |
| 42 | Providing and fixing 8 mm dia health faucet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. CAT NO. C232N ESS ESS |
| 43 | Providing and fixing grating of approved quality and colour.Circular type Viking made |
| 44 | Providing and fixing gun metal gate valve with PVC coated lever of approved quality (screwed end) 15 mm nominal bore |
| 45 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Please Enable Macros to View BoQ information |
