|
| 1 | Providing & replacement of 12x8 Digital Audio Matrix Processor with configurable signal processing, a high bandwidth, fault tolerant digital audio bus, equipped with matrix function to self define the output audio sources, 12 control inputs and 6 logic outputs for integration with GPIO compatible devices, centralized control via RS 232, RJ45 ports to easily connect the third party equipment, maximum Input Level: +20dBu with 0dB; Input Gain:+8 dBu with 12dB gain; Ouput level: +19dBu, Phantom power: 48V; Frequency Response: 20~20KHz (+0.5dB/-1db); THD : <0.01%, Dynamic range: 108dB; Common mode rejection ratio >75dB; Input impedance: 3KΩ; Output impedance : 40Ω balanced; D/A Latency 29/Fs, Ethernet connector for PC software etc. complete as required. etc. complete as required. |
| 2 | Providing & replacement of Dual Channel 2x1200watt (per channel output) Power amplifier that includes network control/monitoring, high-level DSP(Digital Signal Processing), front-panel interface, Voltage Gain 4/8 ohms, 70Vrms and 100Vrms: 34dB, Frequency Response: 8 ohms, 20Hz-20KHz : >108dB, Total Harmonic Distortion:0.35%, Damping Factor (20Hz to 100Hz): >1000, Input Impedance: 10k ohm balanced 5k ohm unbalanced, Maximum Input Level: +20dBU, Crosstalk (below rated power) 20 Hz to 1 kHz: > 80dB, i/c connection etc. complete as required. |
| 3 | Providing & replacement of Dual Channel 2x600watt (per channel output) Power amplifier that includes network control/monitoring, high-level DSP(Digital Signal Processing), front-panel interface, Voltage Gain 4/8 ohms, 70Vrms and 100Vrms: 34dB, Frequency Response: 8 ohms, 20Hz-20KHz : >108dB, Total Harmonic Distortion:0.35%, Damping Factor (20Hz to 100Hz): >1000, Input Impedance: 10k ohm balanced 5k ohm unbalanced, Maximum Input Level: +20dBU, Crosstalk (below rated power) 20 Hz to 1 kHz: > 80dB, i/c connection etc. complete as required. |
| 4 | Providing & replacement of 300 watt mixer amplifier with 6 mic inputs, 1x Line, 2x Aux Inbuilt Bluetooth & USB input, Tone Controls (Bass): ± 10 dB at 100 Hz, Frequency response - 50-15,000 Hz ± 3dB, Output: 1 x Preamp, Balanced, 1 x Line, Balanced, Barrier Strip: 4/8 ohm, 70/100v Overload & low voltage protection, i/c connection etc. complete as required. |
| 5 | Supply Installation & Testing of ethernet controller with 8 buttons and volume control suitable to existing (DSP) Digital Signal Processor, one push/rotary encoder, one encoder ring, eight buttons, and two programmable 64 x 128 pixel LCD screens. The buttons, encoder ring, and LCD screens are multicolor backlit, Sleep function, remote lock/unlock i/c connection etc. complete as required. |
| 6 | Running and operation of PA system & KTS system by deploying One number operator cum technician (skilled) in general shift ( total one shift) for 30 days as per details of installations given in Annexure-A, Annexure-D and Schedule for routine & preventive maintenance given in Annexure-B & C etc. complete as required. Please Enable Macros to View BoQ information |
