|
| 1 | Dismantling and removal of R.R. masonry/brick masonry/ plain cement concrete work, etc. upto 15m height and dumping the debris within a lead of 500m etc. complete as per specification and as directed by the Engineer-in-charge. |
| 2 | Dismantling and removal of RCC foundation/ column/ slab/ beam, etc. in all heights upto 15m fom floor level including all necessary scaffolding and dumping the debris within a lead of 500m by means of manually/mechanically and returning the MS rod to store etc. complete as per specification and as directed by the Engineer-in-charge. |
| 3 | Dismantling and removal of floor (Ellis Pattern) /terrace finish / weathering course, paver block, tiles etc. upto 4.5m height including neat cleaning and dumping the debris within a lead of 500m etc. by means of manually/mechanically etc., complete as per specification and as directed by the Engineer-in-charge. |
| 4 | Earthwork excavation for foundation in all types of loose/hard soil and depositing the spoils with an initial lead of 20m and lift upto 2m including refilling etc., complete as per specification and as directed by the Engineer-in-charge. |
| 5 | Earth filling for foundation/ flooring work using departmental sand including all transportation of filling sand/ building debris from HUP to site, levelling works, compaction, consolidation, etc. by means of manually/mechanically complete as per standard specifications and as directed by the Engineer-in-charge. |
| 6 | Supplying and spreading of 150mm consolidated thick gravel of approved quality above the refilled earth surface with watering, levelling works, compaction and consolidating, etc. by means of manually / mechanically complete as per specification and as directed by the Engineer-in-charge. |
| 7 | Supplying, providing and laying soling stone 300mm thick over the existing sub base/sub grade including levelling and consolidation to form a compact surface using hard blue granite soling stone including hand packing, wedging them tightly and filling the voids with loose sand, watering and sweeping the sand into the joints so that the hole is formed as solid mass, etc. complete as per standard specification and as per the direction of Engineer-in-charge. |
| 8 | Supplying, providing & laying RR masonry foundation/ wall / retaining wall, etc. in cement mortar 1:6 for construction of wall using hard blue granite stone, etc. complete from 2m below ground level to 4.5m height above ground level with neat finishing including proper pointing & necessary scaffolding work etc. complete as per standard specifications and as directed by the Engineer-in-charge. |
| 9 | Supplying, providing and laying dry rubble masonry for soak pit for construction of wall using hard blue granite stone, etc. complete as per standard specifications and as directed by the Engineer-in-charge. |
| 10 | Supplying, providing and laying solid block brick masonry in CM 1:6 using cement concrete solid blocks of minimum size 400*200*150mm for superstructure walls upto 4.5m height from ground level including mixing and conveyance charges and all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 11 | Supplying, providing and laying solid block brick masonry in CM 1:6 using cement concrete solid blocks of minimum size 400*200*100mm for superstructure walls upto 4.5m height from ground level including mixing and conveyance charges and all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 12 | Supplying, providing and laying brick masonry in CM 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for foundation/kerb wall/wall upto 4.5m height from ground level including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 13 | Supplying, providing and laying brick masonry in CM 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for superstructure walls from 4.5m to 15m height and above including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 14 | Supplying, providing and laying PCC 1:4:8 mix for foundation/ flooring work using 40mm and below grade hard blue granite jelly including all form works, mixing, laying, compaction, consolidation and curing, etc. complete as per standard specifications and as directed by the Engineer-in-charge. |
| 15 | Supplying, providing and laying PCC 1:2:4 mix for foundation/ flooring work/kerb wall drainage wall using 20mm and below grade hard blue granite jelly including all form works, mixing, laying consolidation and curing, etc. complete as per standard specifications and as directed by the Engineer-in-charge. |
| 16 | Supplying, providing and fixing twisted reinforcement IS 1786 HYSD bars Fe500D/ Fe550D (TMT bars - TATA/ Agni/ JSW) including fabrication, cutting, bending, cold tying, with overlapping to the standard length wherever necessary and placing the reinforcement in position as per the direction of Engineer-in-charge including binding, provision of spacer bars, cover blocks and all other incidental charges, necessary scaffolding, staging, safety arrangements, etc. complete for all RCC works as per standard specification and as per the direction of Engineer-in-charge. |
| 17 | Supplying, providing and laying cement concrete 1:1.5:3 for RCC works using 20mm and below grade hard blue granite jelly with specified reinforcement (rate excluding the cost of reinforcement) and all mixing, laying, compaction, leveling, consolidation and curing, etc., including the cost of centering/ shuttering work, necessary scaffolding, staging, safety arrangements, etc. complete as per the specification and as per the direction of Engineer-in-charge. |
| 18 | Supplying, plastering with CM 1:4 mix 15mm thick one coat floated hard & trowelled smooth etc. for floors & walls upto 15m height from ground level with neat finishing and necessary grouting, scaffolding, staging, safety arrangements, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 19 | Supplying, plastering with CM 1:3 mix 12mm thick one coat floated hard & trowelled smooth for RCC beam, column, ceiling, wall & floor upto 15m height from ground level with neat finishing and necessary grouting including all scaffolding, staging, safety arrangements, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 20 | Supplying, providing and laying PCC 1:2:4 mix for roof terrace flooring/ sunshade/ inner side of parapet wall work using 6mm chips and below grade hard blue granite jelly and providing 2 coat of polymer coating [Water Proof Coating (Sika/Perma) as per the desired ratio of manufactured product - The mix shall be stirred thoroughly until no bubbles remain in the mix, any lumps found in mix shall be removed. Apply first coat of polymer (water proofing agent) modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat etc.] for said portion, before applying water proof coating the surface shall be cleaned and remove all dust, foreign matters loose materials or any other deposits of contamination by rubbing with wire brush, etc. and all form works, mixing, laying consolidation and curing with necessary scaffolding upto 15m height from ground level, etc. complete as per standard specifications and as directed by the Engineer-in-charge. |
| 21 | Supplying, providing and laying with 10mm thick vitrified-Marbonite double charge/matte finish tiles of size 1200mmx 600mm Kajaria/ Somania /Qutone brand with Cement Mortar 1:2 and pointing, (apply spacer joint, epoxy joint-wherever required) including finishing the joint and pointing flush with the surface, etc. complete as per specification and as directed by Engineer-in-charge. |
| 22 | Supplying, providing and finishing the floor with 10mm thick Anti-skid ceramic tiles (Somania/ Kajaria/ Qutone make) of size 300mm x 300mm of approved quality and shade in CM 1:3 – 15mm thick and pointing the tiles with matching colour cement, etc. complete as per the specification and as per the direction of the Engineer-in-charge. |
| 23 | Supplying, providing and laying with 10mm thick vitrified – full body tiles of size 1200mmx 600mm (Kajaria/ Somania / Qutone brand) with Cement Mortar 1:2 and pointing, (apply spacer joint, epoxy joint-wherever required) including finishing the joint and pointing flush with the surface, etc. complete as per specification and as directed by Engineer-in-charge. |
| 24 | Supplying, providing, laying, dadoing the walls with 10-15mm thick ceramic wall tiles (Somania/ Kajaria/ Qutone make) of size 450mm x 300mm/1200x600mm of approved quality and shade fixing with CM 1:2 – 15mm thick, etc. including neat cleaning, grouting and finishing with shaded colour joint filler etc. complete as per the specification and as per the direction of the Engineer-in-charge. |
| 25 | Supplying, providing, laying, dadoing the floors with 10-15mm thick terracotta pattern floor tiles (matte finish) (Somania / Kajaria / Qutone) make of size 300mm x 300mm of approved quality and shade fixing with CM 1:2 – 10mm thick, etc. including neat cleaning, grouting and edge finishing with shaded colour joint filler etc. complete as per the specification and as per the direction of the Engineer-in-charge. |
| 26 | Supplying, providing and fixing 15-18 mm thick jet black / coffee brown /tan brown granite slab for wash basin/ kitchen/ store room area, etc. including grinding & finishing the ends with half round and closing the joints with matching colour cement and polishing the slab to smooth finish, etc, complete as per the specification and as directed by the Engineer-in-charge. |
| 27 | Supplying, providing and laying 20/25/32mm ID PVC finolex / Ashirvad /Astral super thick pipes including all specials such as bend, elbow, reducer, tee, solvent cement, etc. complete as per the specification and as directed by the Engineer-in-charge. |
| 28 | Supplying, providing and laying 40/50/63mm dia ID PVC finolex / Ashirwad/Astral super thick pipes including all specials such as bend, elbow, reducer, tee, solvent cement etc. complete as per the specification and as directed by the Engineer-in-charge. |
| 29 | Supplying, providing and laying 110mm dia ID PVC finolex / Ashirwad/Astral (6Kg) pipes including all specials such as bend, elbow, reducer, tee, solvent cement, etc. complete as per the specification and as directed by the Engineer-in-charge. |
| 30 | Supplying, providing and erecting in position of Casuarina pole of size 7 feet minimum 2.5 inch dia including earth work and erecting 1 no. of pole (2 feet below ground level and 5 feet above ground level) with the interval of 2 mtrs. with necessary corner and end additional support, etc. complete as per the specification and as directed the Engineer-in-charge. |
| 31 | Supplying and fixing 14 SWG, 2 strands GI barbed wire horizontally 5 rows and vertically @ 1.0m centre to centre, each on the erected Casuarina poles and tying the horizontal row with the poles by using GI wire, vertical row tying with each horizontal rows, etc. complete as per the specification and as directed by the Engineer-in-charge. (Rate excluding the cost of Casuarina pole). |
| 32 | Supplying, providing and fixing GI PVC coated 4mm thick diamond chain link mesh (100x100mm) (TATA Wiron/JSW) fencing of height 1.5m (5 feet), including tying with RCC post/pole etc. complete as per the specification and as per the direction of Engineer-in-charge. |
| 33 | Supplying, providing and fixing of swing type aluminum mosquito net, weaving type (plain weave), mesh size (e.g., 14x14), wire diameter (e.g., BWG30, BWG31), and sizes (e.g., 0.8M x 30M, 1.0M x 30M) sides in existing wooden windows & doors, with fabricating aluminium frame of 1.2 - 2mm thick. Aluminium sections are as required with suitable size of existing frame, etc. including necessary accessories such as aluminium hinges, screws, etc. complete as per the specification and as directed by the Engineer-in-charge |
| 34 | Supplying, providing and fixing Sintex make PVC door of size 750mm x 2100mm including hinges, handle and locking arrangements, etc. complete as per specification and as directed by the Engineer-in-charge. |
| 35 | Supplying, providing and fixing of 6mm thick aluminium grill of standard pattern (diamond shape) including 'F' (or) 'H' section frame with necessary accessories including cutting, grinding, conveyance, etc. complete as per the specification and as directed by the Engineer-in-charge. |
| 36 | Supplying, providing and fixing 50/60mm thick coloured (red / yellow / black/Grey) square/Zig-zag/ Hexagon/ Rectangle shape concrete paver block of size 200x100mm / 150x300mm / 250x100mm/ 200x 120mm/ 220x270mm/ 200x200mm pattern floor, bottom laying with 6mm jelly with 50mm thick over the earth surface including levelling the earth surface with neat finishing, side packing etc. complete as per the specification and as directed by the Engineer-in-charge. |
| 37 | Supplying, providing and fixing the CP & sanitary fittings: White /color Parryware Urinal with spreader and waste pipe including suitable Azhirwad/Supreme/High count make PVC gully trap, urinal bracket, urinal cock, etc. complete as per the specification and as directed by the Engineer-in-charge. |
| 38 | Supplying, providing and fixing the CP & sanitary fittings: Parryware white/color wall hung ceramic wash basin cooper of size 50x40x180cm with necessary accessories (waste coupling, waste hose, etc.) as per specification and as directed by the Engineer-in-charge. |
| 39 | Supplying, providing and fixing the CP & sanitary fittings: Elite [Europeon Closet] White/colour PARRYWARE SINGLE PIECE SUITE 530x380x400mm including Seat cover, with required trap and slim flush tank (standard-white) with necessary fittings as per the specification and as directed by the Engineer-in-charge. |
| 40 | Supplying, providing and fixing the CP & sanitary fittings: Parryware Ceramic Sanitary ware Indian Toilet/Orissa/Rapti Pan with required trap and Slim Flush Tank Combo Pack (Standard, White) (23 Inch Indian Toilet) etc. as per the specification and as directed by the Engineer-in-charge. |
| 41 | Supplying & fixing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (UPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The door system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The door should be designed such that the water drainage does not pass through the reinforcement chamber. The door system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving MS electroplated screws into plug with door closer, etc. complete as per specification and as directed by Engineer-in-charge. |
| 42 | Supplying, providing & fixing of UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement (open)/sliding type from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames with necessary scaffolding arrangements, etc. Rates : The rate shall include the cost of all the materials and labor involved in all the operation described above including scaffolding etc, if any required etc. complete as per standard specification and as directed by the Engineer in-charge. |
| 43 | Supply and installation of Anutone (or) Equivalent Brand of Acoustical False Ceiling of Sisoli Serene / Slate Spirts / Slate Polka Mineral Fibre/ GRG Core Ceiling/Calcium silicate Tiles of size 595 x 595 x15mm having volume density 270 kgs/m3, weight 4kg/m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15/19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 Main T with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 Cross T with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally skelet CT15 W06 Cross T with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15 W12 Cross T in direction parallel to the Main T15 to result in 600 x 600mm module. Sisoli Serene / Slate Spirts /Slate Polka/calcium silicate tiles of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. The systems to achieve noise reduction coefficient not less than 0.5 NRC, so as to have an neat appearance as directed by the department offices including dismantling the existing ceiling without damaging the existing roof/building structure. The cost includes, cost of material, cost of labour, Scaffolding, transportation, conveyance, etc., complying to standard specification and as per the direction of Engineer in-charge. |
| 44 | Supplying, providing and fixing the aluminium glazed casement windows of assorted size using 1.5mm thick outer aluminium frame (Jindal/Royal/Saint Gobain make) and heavy type all other aluminium section (Jindal/Royal/Saint Gobain make) with 4mm thick plain glass, including all accessories clips, rubber beading aluminium beadings, locks, hinges, etc. including dismantling and removing the existing damaged aluminium frames, i.e. windows, doors, partition wall, etc. and dumping the debris within a lead of 200m, with necessary scaffolding arrangements, etc. complete as per the specification and as directed by the Engineer-in-charge. |
| 45 | Supplying, providing and fixing partly glazed and partly heavy type aluminium door of assorted size using 1.50mm thick at vertical, top, horizontal and bottom frame (Normal/coated) and 4/5mm thick plain glass at top and 1.5mm aluminium alloy sheet at bottom including door divider, aluminium clips, brass pivot, hinges, door lock and door closer Dyna /Everite make, etc. complete as per the specification and as directed by the Engineer-in-charge. |
| 46 | Supplying, providing & fixing aluminium partition partly glazed and partly hylam /acp sheet /prelam panels consists of 1.20 to 1.50mm thick powder coated aluminium frame of size 63x38mm verticals at 1m or nearest centre to centre and middle panel consisting of 5mm thick plain glass and top & bottom with 2.5-4 mm thick hylam sheet with EPDM rubber beading including providing aluminium door consist of vertical and top horizontal frame and bottom 100x44.50mm and 5mm thick plain glass at top and 2.00-4.00mm thick hylam sheet including EPDM rubber beading at bottom including door divider, aluminium clips, brass pivot, hinges, door lock and door closer Dyna / Everite/Yama make, etc. with all other accessories, etc. complete as per the specification and as directed by the Engineer-in-charge. |
| 47 | Supplying, providing and fixing 6mm thick PVC false ceiling (Ryan) including aluminium grid and providing all frame works with necessary accessories, etc. complete as per the specification and as directed by the Engineer-in-charge. |
| 48 | Supplying, providing and fixing 500 ltrs. capacity Sintex water tank with all inlet and outlet pipe fitting arrangements and 20mm brass float valves, ball valve, etc., complete as per the specification and as directed by the Engineer-in-charge. |
| 49 | Supply of paints and painting two coat with 1st quality enamel / touch wood paint of approved shade (Berger/Asian/Nippon) matching to the existing for all doors, windows, false ceiling, etc. upto 15m height from ground level, including thorough cleaning and removal of dirt and applying wood sealer/primer and putty wherever required including necessary scaffolding arrangements, etc. complete as per the specification and as directed by the Engineer-in-charge. |
| 50 | Supply of paints and painting two coat with emulsion paint (Asian / Berger/Nippon) 1st quality of approved shade for the external/internal masonry surface upto 15m height from ground level, including thorough scrapping, cleaning, removal of dirt, all tools & tackles, sandpaper and scaffolding arrangements, etc. and applying wall primer & putty touch-up works wherever required etc. complete as per the specification and as directed by the Engineer-in-charge. |
| 51 | Supplying and painting one coat with wall primer (Asian/ Berger / Nippon) 1st quality of approved shade over two coat of wall putty (birla white/equivalent make) at external /internal surface of the buildings upto 15m height from ground level, including thorough scrapping, cleaning, removal of dirt of existing surface including all tools & tackles, sandpaper and scaffolding arrangements, etc. complete as per the specification and as directed by the Engineer-in-charge. |
| 52 | Supplying, providing and laying pressed modern clay tiles of Mangalore/Kerala (as per approved pattern 15-20 mm nominal thickness of approved size) with necessary special tiles for ridges and hips, on roofs jointed with cement mortar 1:4 (1 cement: 4 coarse sand) mixed with 2% integral water proofing compound (Sika/Perma - used as per the desired ratio of manufactured product), laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) with proper grouting, curing and finished neat complete, etc. including dismantling the existing roof tiles and cement mortar with neat cleaning all necessary scaffolding and dumping the debris within a lead of 200m etc. as per the standard specifications and as per the direction of Engineer-in-charge. |
| 53 | Engagement of Mason for miscellaneous work such as repairing the existing damaged sunshade, beams, columns, masonry works including providing scaffolding works, roof leak arresting works, etc. complete as directed by the Engineer-in-charge (Required materials will be issued by company on free of cost). |
| 54 | Engagement of Carpenter for miscellaneous work such as repairing furniture, door and windows, etc. complete as directed by the Engineer-in-charge (Required materials will be issued by company on free of cost). |
| 55 | Engagement of Painter for miscellaneous work such as painting work in the existing furniture/kerb walls/walls/gates including scrapping & cleaning the surface, etc. complete as directed by the Engineer-in-charge (Required painting materials will be issued by company on free of cost). |
| 56 | Engagement of Artist for artistic work in the furniture / gates / name board /building wall, etc. including scrapping & cleaning the surface and marking, etc. complete as directed by the Engineer-in-charge (Required painting materials will be issued by company on free of cost). |
| 57 | Engagement of Plumber for miscellaneous work such as repairing the pipe line, plumbing work, etc. complete as directed by the Engineer-in-charge (Required plumbing materials will be issued by company on free of cost). |
| 58 | Engagement of labour (Mazdoor) for miscellaneous work such as assisting the mason for repairing the existing damaged sunshade, beams, columns, masonry works including providing scaffolding work, roof leak arresting works, etc. and removal of branches of trees and providing temporary fencing, etc. complete as directed by the Engineer-in-charge. (Required materials will be issued by company on free of cost). Please Enable Macros to View BoQ information |
