|
| 1 | SCHEDULE 'A' PART-I : BOQ OF WORKS FOR EXTERNALWATER SUPPLY WORKS. |
| 2 | Excavation in trenches, not exceeding 1.50 mtr wide and not exceeding 1.50mtr in depth; not exceeding 10 Sqm on plan and not exceeding 1.50 mtr in depth and getting out, in any type of soil, for laying pipe line etc, complete all as specified and as directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25Cm, complete all as specified and directed. |
| 4 | Removing excavated materials/ soils, not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed. |
| 5 | Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for, including cleaning, removal and disposal of rubbish/ waste materials from premises, complete all as specified and as directed. |
| 6 | Dismantaling of PCC block walling/ brick masonry, including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar or cement lime mortar of any description, complete all as specified and as directed. |
| 7 | Plain cement concrete M-10(1:4:8), type D-2 (using 40mm graded crushed stone aggregate), as mass concrete in foundation, complete all as specified and as directed. |
| 8 | Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6.0 mtr mean radius built in cement mortar 1:4, complete all as specified and as directed. |
| 9 | Rendering 15mm thick on fair faces of on brick work or concrete surfaces, in cement mortar 1:4, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed. |
| 10 | Preparation of new plastered surfaces of walls and applying two coats of cement paint over one coat of priming plastered and other surfaces with alkali resistant priming paintlime wash, complete all as specified and as directed. |
| 11 | Taking up or down from existing locations, old/unserviceable galvanised steel tubing of 80mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed. |
| 12 | Taking up or down from existing locations, old/unserviceable galvanised steel tubing of 50mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed. |
| 13 | Taking up or down from existing locations, old/unserviceable galvanised steel tubing of 40mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed. |
| 14 | Taking up or down from existing locations, old/unserviceable galvanised steel tubing of 25mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed. |
| 15 | Taking up or down from existing locations, old/unserviceable galvanised steel tubing of 20mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed. |
| 16 | Tubes, 'medium grade' galvanised, 50mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, fixing on walls or on any open surfaces with mild steel flat iron clamps, screws, complete all as specified and as directed. |
| 17 | Tubes, 'medium grade' galvanised, 40mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, fixing on walls or on any open surfaces with mild steel flat iron clamps, screws, complete all as specified and as directed. |
| 18 | Tubes, 'medium grade' galvanised, 25mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, fixing on walls or on any open surfaces with mild steel flat iron clamps, screws, complete all as specified and as directed. |
| 19 | Tubes, 'medium grade' galvanised, 20mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, fixing on walls or on any open surfaces with mild steel flat iron clamps, screws, complete all as specified and as directed. |
| 20 | Tubes, 'medium grade' galvanised, 80mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches or under floors, complete all as specified and as directed. |
| 21 | Tubes, 'medium grade' galvanised, 50mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches or under floors, complete all as specified and as directed. |
| 22 | Tubes, 'medium grade' galvanised, 40mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches or under floors, complete all as specified and as directed. |
| 23 | Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20mm bore pipe line, complete all as specified and as directed. |
| 24 | Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 25mm bore pipe line, complete all as specified and as directed. |
| 25 | Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 40mm bore pipe line, complete all as specified and as directed. |
| 26 | Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 50mm bore pipe line, complete all as specified and as directed. |
| 27 | Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed. |
| 28 | Dismantling wrought iron or mild steel work of framed truss etc, any description not otherwise provided for, complete all as specified and as directed. |
| 29 | Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth including and applying two coats of synthetic enamel paint over one coat of zinc chrome/ red oxide primer, complete all as specified and as directed. |
| 30 | Sluice Valve, cast iron, Class PN 1.6, size 50mm bore pipe, flanged type, conforming to IS: 14846-2000, ISI marked with stainless steel spindle, brass nuts and iron wheel head including jointing material such as rubber fibre board packing ring and nuts, bolts and washers of suitable size for vertical or horizintal fittings, fixing in repairs, complete all as specified. |
| 31 | Sluice Valve, cast iron, Class PN 1.6, size 80mm bore pipe, flanged type, conforming to IS: 14846-2000, ISI marked with stainless steel spindle, brass nuts and iron wheel head including jointing material such as rubber fibre board packing ring and nuts, bolts and washers of suitable size for vertical or horizintal fittings, fixing in repairs, complete all as specified. |
| 32 | Sluice Valve, cast iron, Class PN 1.6, size 100mm bore pipe, flanged type, conforming to IS: 14846-2000, ISI marked with stainless steel spindle, brass nuts and iron wheel head including jointing material such as rubber fibre board packing ring and nuts, bolts and washers of suitable size for vertical or horizintal fittings, fixing in repairs, complete all as specified. |
| 33 | Sluice Valve, cast iron, Class PN 1.6, size 150mm bore pipe, flanged type, conforming to IS: 14846-2000, ISI marked with stainless steel spindle, brass nuts and iron wheel head including jointing material such as rubber fibre board packing ring and nuts, bolts and washers of suitable size for vertical or horizintal fittings, fixing in repairs, complete all as specified. |
| 34 | Construction of valve pit of size 1200mmx1200mmx1200mm (internal dimensions) in repairs, with 100mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) in bedding, Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6.0 mtr mean radius built in cement mortar 1:4, rendering in 15mm thick cement mortar 1:4 on internal and external exposed surfaces including white washing with two coats of lime wash, along with 40x40x6mm mild steel angle iron frame welded with 3.0mm thick mild steel cover with locking arrangement, mild steel hinges, handles and suitable locking arrangements, fastening arrangements, nuts, bolts and washers, and including painting with two coats of black colour synthetic enamel paint to mild steel surfaces of angle iron framed work and mild steel sheet, complete all as specified and as directed. |
| 35 | Description all as serial ietm No- 1.33 here-in-before but for valve pit of size 900mmx900mmx900mm (internal dimensions). Please Enable Macros to View BoQ information |
| 36 | Description all as serial ietm No- 1.33 here-in-before but for valve pit of size 900mmx900mmx900mm (internal dimensions). Please Enable Macros to View BoQ information |
