|
| 1 | M&L for aluminium sections for side hung/sliding window and partitions etc. with suitable sections for frame and shutter fixed with dash through holder fastener with length not less than 75mm to walls/floors including locking arrangement and rubber gusket necessary channel, neoprene beading, clips, fixing screws, nuts etc. complete all as specified and as directed. |
| 2 | S & F Anodised aluminium window and ventilator shutters,side hung/sliding type with styles,rails,sash bar,sliding frame etc all are made from aluminum anodised section weighing 0.55 kg/m including necessary joining cleats ,glazing clips, rubber packing with locking system anodised aluminium snap beading screws complete all as specified and as directed. |
| 3 | S&F Anodised aluminium door shutters(minimum thickness of ,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges, stopper, tower bolt - 02 Nos anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 4 | S&F anodised aluminium grill, 10mm thick, diamond shape with apareture 75mm fixed to windows including u type frame and nut complete all as specified and as directed. |
| 5 | S&F sheet glass 4.0 mm thick ordinary quality and glazing with oil putty square, rectangle n.exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 6 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified as directed. |
| 7 | M&L for Preparation newly or previously untreated steel surfaces of any description over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 8 | S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixedrubber gusket necessary channel, neoprene beading, clips, fixing screws, nuts etc. complete all as specified and directed |
| 9 | S&F 18mm thick LEAD FRE PVC celuka ply of single side rigid laminated of approved colour and other side plain white colour fixed with screws or cabinet hinges including L Bihari Hinges and cement adhesive to make kitchen/bedroom cabinet sides top and bottom and shelves inside the cabinet complete all as per manufactures specification complete all as specifiied and as directed by Engr-in-Charge |
| 10 | Excavating in post holes (or similar holes) in hard and dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed. |
| 11 | Demolition of brick work built in cement mortar in any description and position, complete all as specified and as directed. |
| 12 | M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar (1:6) complete all as specified and as directed. |
| 13 | M&L for providing PCC (1:2:4) type B2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed. |
| 14 | Dismantling of plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof covering complete all as specified and as directed. |
| 15 | Supply & Fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/chadding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 16 | M&L Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick any colour having tensile strength of 550 Mpa as in ridges, hips valley gutter etc fixed with self tapping screws ccomplete all as specified and as directed. |
| 17 | S&F steel work in tubular including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979St grade St-240 complete all as specified and as directed. |
| 18 | M&L for rendering 15mm thick plastering on fair faces of brick work or concrete surfaces in CM (1:4) mixed finished even and smooth without using extra cement complete all as specified and as directed. |
| 19 | M & L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint on plastered surfacescomplete all as specified and as directed. |
| 20 | M&L for Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed. |
| 21 | Removing excavated surplus soil to a distance exc 1.5 km and n. exc 5.0 km and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & as directed. |
| 22 | Demolition of cement concrete in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 23 | M&L for hardcore of broken stone or boulders gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface, ccomplete all as specified and directed. |
| 24 | M&Lfor 150mm thick Plain cement concrete type D-2 (1:4:8) using (40mm graded aggregate) with floor even and rough all as specified and as directed by Engr-in-Charge |
| 25 | M & L for sand filling under floor or foundation for watering and consolidation all as specified and as directed by Engr-in-Charge |
| 26 | M&L providing coloured dense 60 mm thick Machine pressed precast concrete interlocking paver block, shape and size conforming to IS 15658-2006 of M-35 grade ,laid with grey cement and pigment all as specified and as directed by Engr-in-Charge |
| 27 | M&L for cement concrete (1:1.5:3) type B-1 using 20 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed |
| 28 | M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping on top of brick edging and like including necessary form work complete all as specified and directed. |
| 29 | M&L for applying three coats of white wash on new plastered wall surface including prepartion of surfaces complete all as specified. Please Enable Macros to View BoQ information |