|
| 1 | Demolition of stone slabs and tiles of any description or thickness in floor, aprons etc laid, bedded and pointed in any mortar complete all as specifed and as directed by Engr-in-Charge. |
| 2 | Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for 25 mm thick PCC type B-0 (12.5mm graded stone aggregate) 1:2:4 as in floor or similar works complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for Non-skid coloured ceramic tiles, 7 to 8mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in CM 1:4 complete all as specified as directed by Engr-in-Charge. |
| 5 | M&L Non-Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11 and nexc 0.18 Sqm in floors over 15mm thick screed bed in cement mortar 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for endura tiles heavy duty type of size 300x300mm, 10mm thick, non skid, acid and scratch resistance laid over 15mm thick screed bed in CM 1:4 as in floor, jointed in neat cement slurry and pointed with white cement and pigment to match the shade complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for Coloured Glazed ceramic tiles of size 300x450x7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10mm thick rendering in CM (1:3) complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L for Vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles nexc 0.36Sqm in floors laid over 15mm thick screed bed in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for granite work (table rubbed, polished and moulded) 18-20 mm thick as in steps, jambs, pillars, plateforms and like machine cut bedded and jointed & pointed with white cement and pigment to match the shade of granite stone incl grinding and moulding over 20mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L for machine cut kota stone slab flooring 20-25mm thick over 20mm thick screed bed in CM 1:4 laid over cement slurry, pointed and jointed with grey cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed by by Engr-in-Charge. |
| 11 | Demolition of Brickwork or stone/boulders masonry built in cement mortar complete all as specified and as directed by the Engr-in-charge. |
| 12 | Taking down cement plaster on Brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L for precast cement concrete type B-1, 1:3:6 (using 20mm graded aggregate) block masonry with soild block, exc 10cm width and setting in cement mortor 1:6 complete all as specified and as directed by Engr-in-Charge. |
| 14 | M&L rendering 15mm thick in CM 1:6 on other fair faces of brick work or concrete surfaces, finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. |
| 15 | M&L rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finishing even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 16 | M&L for preparation of new plastered surfaces on walls and applying two coats of Oil bound emulsion paint over a coat of primer complete all as specified and as directed by Engr-in-Charge. |
| 17 | M&L for preparation of new wall surfaces and applying two or more coats of premium acrylic exterior emulsion paint over a coat of wall care putty complete all as specified and directed by Engr-in-Charge. |
| 18 | Taking up or down steel water tubing of 20mm dia bore and connection incl cleaning for refixing or removal to stores complete all as specified and directed by Engr-in-Charge. |
| 19 | Taking up or down steel water tubing of 25mm dia bore and connection incl cleaning for refixing or removal to stores complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L for 20mm 3-layer PP-R concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for 25mm 3-layer PP-R concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F in repair 10ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle incl brackets complete all as specified and directed by Engr-in-Charge. |
| 23 | S&F in repair 15mm Stop valve/angle cock, fancy type, chromium plated with long shunk and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engr-in-Charge. |
| 24 | S&F in repair 15mm Cast copper alloy, Chromium Plated Bib tap fancy type with crutch or butterfly handle, screwed for iron pipe or for brass pipe of for ferrule and fixed complete all as specified and directed by Engr-in-Charge. |
| 25 | S&F in repair CP health faucet with 1 meter flexible hose and stand complete all as specified and directed by Engr-in-Charge. |
| 26 | S&F in repair 15mm bore Pillar taps cast copper alloy, with capstain head, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 27 | S&F in repair CP wall mixture with telephonic shower mixing with hot & cold water secured down for iron pipe complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F in repair CP centre hole basin mixture, mixing with hot & cold water secured down for iron pipe complete all as specified and directed by Engr-in-Charge. |
| 29 | S&F in repair 450mm long PVC connection 15mm bore with PTMT nuts complete all as specified and directed by Engr-in-Charge. |
| 30 | Dismantling water storage tanks of capacity exc 250 & n.exc 500 ltrs and removing to store complete all as specified and as directed by Engr-in-Charge |
| 31 | Dismantling water storage tanks of capacity exc 500 & n.exc 1000 ltrs and removing to store complete all as specified and as directed by Engr-in-Charge |
| 32 | S&F rotational moulded polyehtylene water storage tank of 500 ltrs capacity (Cylindrical vertical with closed top) in position all as specified in SSR Part-I complete all as specified and directed by Engr-in-Charge. |
| 33 | S&F rotational moulded polyehtylene water storage tank of 1000 ltrs capacity (Cylindrical vertical with closed top) in position all as specified in SSR Part-I complete all as specified and directed by Engr-in-Charge. |
| 34 | S&F in repair 600x450mm bevelled edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass and cup washers all as specified and as directed by Engr-in-Charge |
| 35 | M&L for PVC (SWR) floor trap 75mm dia outlet with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-in-Charge. |
| 36 | Dismantling of PVC drain piipe of any size or any dia or any position/ description , including disposal or removing to store complete all as specified and directed by engineer-in-charge. |
| 37 | S&F PVC (SWR) 'P’ trap 110mm bore complete all as specified and directed by Engr-in-Charge. |
| 38 | S&F PVC (SWR) 'S’ trap 110mm bore complete all as specified and directed by Engr-in-Charge. |
| 39 | S&F PVC (SWR) bends 75mm dia complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F PVC (SWR) bends 110mm dia complete all as specified and directed by Engr-in-Charge. |
| 41 | S&F PVC (SWR) 110mm dia junction (Single T) equal or unequal complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed by Engr-in-Charge. |
| 43 | S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed by Engr-in-Charge |
| 44 | S&F in repair High grade SS toilet pan of size 58.5x48.2x30 cm (excludiig flushing cistern and flush pipe) fixed in position complete all as specified and directed by Engr-in-Charge. |
| 45 | S&F in repair plastic water closet seat cover white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-Charge. |
| 46 | S&F in repair Vitreous China bowl urinal flat back, size 430x 370x340 mm white (minimum), with grating and union for discharge pipe, waste pipe (excluding flushing cistern & flush pipe) complete all as specified and directed by Engr-in-Charge. |
| 47 | S&F in repairs vitreous china wash hand basin (flat black) white of size 550x400mm with pedestal including waste coupling & waste pipe and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F in repair one piece EWC chinaware with soft closet cover and mounted flushing cistern of size 620x370x670mm white in colour complete all as specified and directed by Engr-in-Charge. |
| 49 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) and incliding white plastic water closet seat cover with mild steel CP or aluminisied hinging device complete all as specified and as directed by Engr-in-Charge |
| 50 | Note : Deduction for amount of Rs. 11,390.00 as listed in Schedule 'A' Part-II (Schedule of Credit) shall be made while awarding of contract. Please Enable Macros to View BoQ information |
