|
| 1 | SCHEDULE 'A' PART-I: B/R WORKS |
| 2 | Taking down chowkat with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and as directed. |
| 3 | Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n exc 4.0 sqm each complete all as specified and as directed. |
| 4 | Taking down shutters of any description nexc 1 sqm complete all as specfied and as directed. |
| 5 | Taking down shutters of any description exc 1 sqm but nexc 2 sqm complete all as specfied and as directed. |
| 6 | M&L for second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 7 | M&L for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 8 | M&L for 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed |
| 9 | M&L for 30 mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed |
| 10 | M&L for taking down shutters of any description nexc 1.00 sqm adjusting and refixing in the same opening complete all as specified and as directed . |
| 11 | M&L for taking down shutters of any description exc 1.00 sqm but nexc 2.00 sqm adjusting and refixing in the same opening complete all as specified and as directed . |
| 12 | S&F in repairs 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and as direcetd |
| 13 | M&L for repairing aluminium doors of any description incl replacement of damaged rubber beads and hinges incl taking down and refixing the door in the same opening complete all as specified and as directed. |
| 14 | S&F in repairs butt hinges of 100 mm size medium weight cold rolled stainless steel and fixed complete all as specified and as directed. |
| 15 | S&F butt hinges of 100 mm size medium weight cold rolled stainless steel and fixed complete all as specified and as directed. |
| 16 | S&F in repairs butt hinges of 75 mm size medium weight cold rolled stainless steel and fixed complete all as specified and as directed. |
| 17 | S&F butt hinges of 75 mm size medium weight cold rolled stainless steel and fixed complete all as specified and as directed. |
| 18 | S&F in repairs 100 mm in size aluminium handles cast type complete all as specified and as directed. |
| 19 | S&F 100 mm in size aluminium handles cast type complete all as specified and as directed. |
| 20 | S&F in repairs 150 mm in size aluminium handles cast type complete all as specified and as directed. |
| 21 | S&F 150 mm in size aluminium handles cast type complete all as specified and as directed. |
| 22 | S&F in repairs for 150 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified . |
| 23 | S&F for 150 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified . |
| 24 | S&F for 100 mm longAluminium anodised barrel tower bolt of extruded section complete all as specified . |
| 25 | S&F in repairs for 100 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified . |
| 26 | S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed. |
| 27 | S&F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed. |
| 28 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 29 | S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 30 | S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 31 | S&F in repairs 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane incl hacking out old glass from wooden/steel/concrete complete all as specified and as directed. |
| 32 | S&F in repairs 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane incl hacking out old glass from wooden/steel/concrete complete all as specified and as directed. |
| 33 | S&F 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane incl hacking out old glass from wooden/steel/concrete complete all as specified and as directed. |
| 34 | S&F 3mm thick frosted Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 35 | S&F in repairs 3mm thick frosted Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane incl hacking out old glass from wooden/steel/concrete complete all as specified and as directed. |
| 36 | M&L for preparation of new or previously untreated wooden surface of any description over 10 sqcm and applying two coat of synthetic enamal paint over a coat of pink primer complete all as specified and as directed. |
| 37 | M&L for preparation of new or prviously untreated steel surface of any description nexc 10 sqcm and applying two coat of synthetic enamal paint over a coat of red oxide zinx crome primer complete all as specified and as directed |
| 38 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed |
| 39 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 40 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded wood grain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and wood grain pirinted PVC for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to & 5 mm thick x 15 mm wide PVC sheet beading and decorative PVC beading of 10mm x 10mm (90 degree) with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified . |
| 41 | M&L for factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) Area of opening nexc 2.00 sqm complete all as specified and as directed. |
| 42 | M&L for factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) Area of opening exc 2.00 sqm complete all as specified and as directed. |
| 43 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 44 | S&F Powder coating anodised aluminium frame for doors, windows, ventilatiors with one or more rebtes including joining cleat for fixing etc. complete all as specified. (Minimum thickness of powder coating 50 micron). |
| 45 | S&F Anodised aluminium frame for doors, windows, ventilatiors with one or more rebtes including joining cleat for fixing etc. complete all as specified. (Minimum thickness of powder coating 50 micron). |
| 46 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed echanically wherever required including cleat angle, Aluminium snap eading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 47 | S & F 9mm thick Prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed. |
| 48 | S & F in repairs 9mm thick Prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed. |
| 49 | M&L for toughened glass 12 mm thick as in hinged door,window, partition automatic doors and similar work including cutting to shape, drilling holes required including all fittings. |
| 50 | S & F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as directed. |
| 51 | S&F in repair Door closer Cast iron body hydraulically regulated, designation No.2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed |
| 52 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainlesssteel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and as directed. |
| 53 | M&L for 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work in repairs complete all as specified and as directed. |
| 54 | M&L for 12 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work in repairs complete all as specified and as directed. |
| 55 | M&L for 0.90 mm thick Decorative laminates type I, or surface finish, colour and pattern as approved complete all as specified and as directed. |
| 56 | S&F in repair 30mm continuous(piano) hinges,mild steel, bright finish or electrogalvanised complete all as specified. |
| 57 | S&F 100 mm size Brass handles, cast type, polished bright complete all as specified and as directed |
| 58 | Dismantaling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 59 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165 |
| 60 | S&F in repair to Harrison rails,mild steel,chromium plated with fixing brackets,stops,rollers etc complete all as specified and directed |
| 61 | Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises. |
| 62 | M&L for light shade Virified Ceramic coloured tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement lurry and pointed in white or coloured cement to match and laid over 15 mm thk cement screed bed in cm 1:6 for laying floor finishes. |
| 63 | M&L for light shade Virified Ceramic coloured tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement lurry and pointed in white or coloured cement to match and laid over 10 mm thk cement rendering in cm 1:4 for laying floor finishes. |
| 64 | M&L Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 for laying floor finishes. |
| 65 | M&L Non-skid joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 for laying floor finishes. |
| 66 | M&L for Glazed ceramic coloured tiles 350x250x7 mm/450x350x7 mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or Coloured cement to match & including 10mm thick rendering in CM (1:4) on fair faces of brickwork or concrete surfaces complete all as specified. |
| 67 | M&L for 16/18 mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as directed. |
| 68 | Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete |
| 69 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc including removal of debris out side MD land complete all as specified and as diretced. |
| 70 | M/L precast cement concrete block masonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified. |
| 71 | M/L precast cement concrete block masonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified. |
| 72 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 73 | M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even & smooth without using extra cement with WPC (WPC paid separetely) complete all as specified and directed. |
| 74 | M&L 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even & smooth without using extra cement complete all as specified and directed. |
| 75 | Supply only integral water proofing compound ISI marked. |
| 76 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint on wall complete all as specified and as directed. |
| 77 | M&L for preparing old distempered wall surfaces and applying one coat of oil bound distemper on walls. |
| 78 | Material and labour for complete removal of existing treatment from old decorated plastered surfces of wall by Vacuum based sanding machine, removal of nails etc & filing cracks / hole with putty, applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and proper mixing of putty ) and appling two coat of emulsion distemper white or coloured complete all as specified and directed as per manufacturers instruction. |
| 79 | Preparation of New or previously untreated surfaces of cement or plastered surfaces, of any description and girth, not otherwise described and applying 1mm thick wall care putty and primer on wall surface to achieve even and smooth surface and applying two coats of oil bound distemper on walls. |
| 80 | M&L for preparing old decorated plaster surfaces etc and applying one coat of white wash on ceilings complete all as specified and directed. |
| 81 | M&L for preparing old plastered surface with one coats of white wash on wall surface. |
| 82 | M&L for preparation of old painted surfaces of wood and wood based materials of any description, not otherwise described and applying one coat of Synthetic enamel paint over 10 cm width or girth complete all as specified and directed. |
| 83 | M&L preparation of old painted steel and iron surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 84 | Complete removal of existing treatment and preparation of old or previously surfaces and applying a thick layer of wall care putty and primer on wall surface to achieve even and smooth surface and applying two coats of weather proof acryic emulsion paints, exterior grade (100% acryic) on surfaces of walls. |
| 85 | Material & Labour preparing and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specifeid and as directed. |
| 86 | Material and labour for preparation of newly plastered surfaces of wall by vacuume based sanding machine, applying wall care putty (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coat of emulsion distemper white or coloured complete all as specified and directed as per manufacturers instruction. |
| 87 | Dismantaling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 88 | S&F Aluminium composite panel(ACP) 4mm thick of approved colour for interior / exterior in any position for any height consisting of two layers of aluminium skin of 0.25mm thick sandwiching a thermo plastic core in continuous lamination process with PVDF coating for interior / exterior grades ensuring long colour and no fungal attck including grid work made with aluminium square pipe of size 25mm X 25mm X1.5mm thick and fixed to the panels with suitable fasteners without any undulation in facias complete all as per manufacturers instrictions and as directed. Please Enable Macros to View BoQ information |
