|
| 1 | Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. manholes,pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 3 | M & L for Cement concrete (1:4:8) Type D-2 ( 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 4 | M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 5 | Returning/filling in including spreading, levelling, watering and well ramming in layers n xc 25cm in hard/dense soil complete all as specified and directed. |
| 6 | Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 7 | M&L RCC (1:1.5:3 ) type A-1 using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 8 | M&L RCC (1:1.5:3 ) type A-1 using 20 mm graded aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 9 | M & L for Reinforced Cement concrete (1:1.5:3 ) type A-1 (using 20 mm graded stone aggregates) in beams, cantilevers, bressumers, lintels upto 1.5 m span complete all as specified and directed. |
| 10 | M & L for Reinforced Cement concrete (1:1.5:3 ) type A-1 (using 20 mm graded stone aggregates) in slabs supported on walls complete all as specified and directed. |
| 11 | M & L for providing pre-cast cement concrete landing, cover slabs (for man holes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:6 complete all as specified and directed. |
| 12 | M & L for plain cement concrete type B1 (1:2:4) (using 20 mm graded stone aggregate) as in surface channel or drain or benching in manhole complete all as specified and directed. |
| 13 | M & L for use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed. |
| 14 | M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed. |
| 15 | M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed. |
| 16 | M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed. |
| 17 | M & L for use and waste of formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 10 cm and not exc. 20 cm in rough finished surfaces of concrete complete all as specified and directed. |
| 18 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 19 | M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for slab, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 20 | M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 21 | M&L for rendering 10mm thick in CM 1:6 on concrete/wall surfaces finished even and smooth without using extra cement. |
| 22 | M & L for 5 mm thick rendering in ceiling in cement mortar 1:3 on fair faces of brick work or concrete surfaces and finishing the surface even and fair complete all as specified and directed. |
| 23 | M&L rendering 15mm thick in CM 1:4 mixed with WPC at 3% by weight of cement on concrete wall surfaces , finished even and smooth without using extra cement. (WPC to be measured and paid for separately) |
| 24 | Supply only integral water proofing compound. |
| 25 | M & L for hardcore broken stone or boulders of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15mm thick, watered and rammed to a true surface complete all as specified and directed. |
| 26 | Sand filling under floors or in foundation including watering & consolidation complete all as specified and directed. |
| 27 | M & L for 75 mm thick, cement concrete type C-2 , 1:3:6 (40 mm graded stone aggregate)finishing the surfaces even and smooth without using extra cemen as in plinth protection complete all as specified and directed. |
| 28 | M & L for providing 100 mm thick cement concrete type D2 (1:4:8) (using 40 mm grade stone aggregate) as in sub floor, sub base of floor complete all as specified and directed. |
| 29 | M & L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jounted in neat cement slurry and pointed in white or coloured cement to match,over 15 mm thick screed bed in CM 1:6 complete. |
| 30 | M & L for Glazed ceramic coloured tiles in vertical surface 350x250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincl 10 mm thick backing coat in CM 1:4 complete. |
| 31 | M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick cement mortar 1:4 all as specified and directed by Engineer - in - Charge . |
| 32 | S&F Anodised aluminium frame powder coating ( Minimum thickness of powder coating 50 micron) for door,window and ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 33 | S&F 3.0 mm thick figured glass, pin head type glazing with oil putty in squares not exc. 0.50sqm in each pane complete all as specified and as directed. |
| 34 | S & F stainless steel wire cloth, 0.36mm nominal dia. of wire and average width of aperture 1.40mm fixed with tinned tacks, or stainless steel wire staples including all cuttings, wastage, etc complete all as specified and directed. |
| 35 | S & F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as directed. |
| 36 | S & F 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed. |
| 37 | S&F 100 mm long butt hinges, \\"medium weight\\" cold rolled mild steel complete all as specified and directed. |
| 38 | S&F 100 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 39 | S&F 150 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 40 | M & L for applying two coats of acrylic distemper over one coat of primer over 1mm thick wall care putty to new plastered wall surfaces inluding preparation of surfaces complete all as specified |
| 41 | M & L for applying two coats of acrylic distemper over one coat of primer over 1mm thick wall care putty to new plastered ceiling surfaces inluding preparation of surfaces complete all as specified |
| 42 | M & L for preparation of new or previously untreated wall surfaces & applying two coats of acrylic base weather shield paint (1st quality) over one coat of exterior grade primer including preperation of surfaces complete all as specified & directed. |
| 43 | S&F GI Tubes, medium grade with all fitting; laid in trenches of 15mm bore complete all as specified & directed. |
| 44 | S&F GI Tubes, medium grade with all fitting; laid in trenches of 20mm bore complete all as specified & directed. |
| 45 | S&F Vitreous China wash down water closet pan (pedestal pattern), one piece toilet floor mounted, white including flushing tank, fixing bolts, flush pipe, seat cover, S trap, PVC pipe 110mm dia upto first manhole complete all as specified & directed. (Make: Jaguar or equivalent in Prayag/Cera) |
| 46 | S & F vitreous china squatting pan Orrisa pattern size 580mm x 440mm white with integral foot rest with CI ‘P’ or ‘S’ trap and fixing in lime concrete (1 lime: 2 sand : 5 aggregate), 150mm thick all round and finished just below level of rim of pan to receive the floor finishing including connection to flushing cistern and flush pipe to WC pan all as specified and directed by Engineer - in - Charge . |
| 47 | S&F vitreous china wash hand basin white, counter top including fixing accessories of size 560 x 470 x 190 mm, waste coupling, waste pipe, PVC connecting pipe 450 mm long, complete all as specified and directed. (Make: Jaguar or equivalent in Cera/Prayag) |
| 48 | S&F vitreous china bowl urinal half stall type, white with grating and union for descharge pipe, PVC connection fixed complete to walls all as specified and directed. |
| 49 | S & F vitreous china urinal partition white of size 310x700 mm, urinal partitions slabs terminating about 40cm above floor line complete all as specified. |
| 50 | S & F 600 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed. |
| 51 | S & F for PVC (SWR) pipes, single socketed,110mm bore pipes, in any length with rubber joints,laid in trenches or in floors complete all as specified & directed. |
| 52 | S & F for PVC (SWR) bends 110 mm dia any radius with access door complete all as specified & directed. |
| 53 | S & F for Bib taps, 15 mm bore, cast copper alloy with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed complete all as specified & directed. (Make : Jaguar or equivalent) |
| 54 | S & F for two way Bib taps, 15 mm bore, cast copper alloy with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed complete all as specified & directed. (Make : Jaguar or equivalent) |
| 55 | S & F 15 mm bore Basin mixer (, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make : Jaguar or equivalent) |
| 56 | S & F for Stop valves/Angle tap, 15 mm bore, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions and fixed complete all as specified & directed. (Make : Jaguar or equivalent) |
| 57 | M&L PVC (SWR) floor trap 100mm dia, plain with grating including jointing to waste pipe fixed in solvent cement complete all as specified & directed. |
| 58 | S&F Tolilet paper holder, with flat recessed type stainless steel complete all as specified & directed. |
| 59 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood & fixed to wooden plugs with CP brass screws & cup washers complete all as specified & directed. |
| 60 | S&F Soap dish, Vitreous China white, approximate size 160x160x90mm complete all as specified & directed. |
| 61 | S&F chromium plated towel rail 600mm long complete all as specified and directed. |
| 62 | Cutting into existing manholes for connecting new drains 100mm dia, making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, & reforming benching as required complete all as specified & directed. |
| 63 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. complete all as directed. |
| 64 | S&F 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed etc complete all as directed. |
| 65 | S & F of 15 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. Please Enable Macros to View BoQ information |
| 66 | S & F of 15 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. Please Enable Macros to View BoQ information |
