|
| 1 | M&L for for cleaning & flushing of raw water reservior tank of capacity 20000 gallons at PH No1 removing all silt and sludge etc and deposited inside the MOD Land, cleaning of entire internal surfaces of tank using bleaching powder , wire brush/stainless steel wiper etc and flushing with water including writing date of cleaning and Capacity with black synthetic enamel paint complete all as specified and as directed. |
| 2 | M&L for for cleaning & flushing of raw water reservior tank of capacity 40000 gallons at PH No1 removing all silt and sludge etc and deposited inside the MOD Land, cleaning of entire internal surfaces of tank using bleaching powder , wire brush/stainless steel wiper etc and flushing with water including writing date of cleaning and Capacity with black synthetic enamel paint complete all as specified and as directed. |
| 3 | M&L for Cleaning of Sedimentation water Tank of capacity (20000 + 20000) gallons at PH No 1 using following stages cleaning process including arrangement of necessary T&P, labour and Chemicals mechanize etc before starting process of cleaning including writing date of cleaning using black/white paint complete all as specified and as directed.(a) Mechanized Dewatering(b) Sludge Removal(c) High Pressure Cleaning (d) Vaccum cleaning(e) Antibacterial spray |
| 4 | Cleaning of overhead pressed mild steel tank located at various places inside the cantt Area of capacity 10000 Gallon using following stages cleaning process including arrangement of necessary T&P, labour and Chemicals mechanize etc before starting process of cleaning including writing date of cleaning using black/white paint complete all as specified and as directed.(a) Mechanized Dewatering(b) Sludge Removal(c) High Pressure Cleaning (d) Vaccum cleaning(e) Antibacterial spray |
| 5 | Dismantling /Cutting rivets the existing serviceable/unserviceable Joist, Channel, angle or Tee section from pressed steel tank upto height of 2.5/4 Mtrs high staging,MS plate and keeping aside of serviceable for reuse at site or carrying to store, complete all as specified and as directed. |
| 6 | Dismantling carefully PS plate of any size & thick from side wall & bottom of PS tank including nuts, bolts & washers and keeping aside for reuse at site or carrying to store. |
| 7 | S&F pressed steel plate of Size 1.25M x 1.25M x6.00 mm thick suitable for steel over head tank at 2.5/4 Mtrs high staging as per existing one (as use in bottom side plates) including tightening of Nut, bolt with washers & provision of necessary lead wool/lead pig/lead wire & rubber gasket over and including applying two coats of black bituminous lead free paint (suitable for drinking water) on inner surface and two coats of aluminium paint on outer surface over a coat of red oxide primer after preparation of surface complete all as specified and directed. (Note:-Necessary New nuts, bolts, washers will be measured & paid separately) |
| 8 | S&F pressed steel plate of Size 1.22M x 1.22M x6.00 mm thick suitable for steel over head tank at 2.5/4 Mtrs high staging as per existing one (as use in bottom side plates) including tightening of Nut, bolt with washers & provision of necessary lead wool/lead pig/lead wire & rubber gasket over and including applying two coats of black bituminous lead free paint (suitable for drinking water) on inner surface and two coats of aluminium paint on outer surface over a coat of red oxide primer after preparation of surface complete all as specified and directed. (Note:-Necessary New nuts, bolts, washers will be measured & paid separately) |
| 9 | Fixing only serviceable PS plate received from item No 6 here in before with nuts, bolts and washers as reuired quantity and size and new lead wool, black putty of approved make and superior quality for use of drinking water including applying one coats of black bituminous lead free paint (Suitable for drinking water) on inner surface and one coats of Synthetic enamel paint on outer surface after preparation of old surfaces complete all as specified and as directed.(Note:-Necessary New nuts, bolts, washers will be measured & paid separately) |
| 10 | S&F MS plain sheet 3.15mm thick with lap joint on roof of PS tank with nuts bolts & washers, welding as required, drilling holes, bending cold or hot, including applying two coats of black bituminous lead free paint (Suitable for drinking water) on inner surface and two coats of Synthetic enemel paint on outer surface over one coat of red oxide primer after preparation of surfaces complete all as specified and directed.(necessary New nuts, bolts, washers will be measured & paid separately) |
| 11 | S&F MS Joist, channel, angle or tee section of grade Fe-410-S cut to required size & shape for bracings, supports & clamps including welding, bending cold or hot, drilling holes, all as specified and directed by Engr-in-Charge. |
| 12 | S&F Mild Steel Screw Bolts of size 16-20 mm (Machine Made) with Hexa-gonal or Square Heads at One End and Screwed the Other or Screwed Both Ends each Screwed End to be fitted with Washers and One Hexagonal or Square Nut, diameter of Shank and Length of Bolt as ordered, complete all as specified and as directed. |
| 13 | M & L for preparation of old painted outside surface of pressed steel tank and applying one coat of aluminium paint including writing date of cleaning and Capacity with black synthetic enamel paint( each size of letter should be 30 CM) complete all as specified and as directed. |
| 14 | M & L for preparation of old painted inner surface of pressed steel tank and applying one coat of black bituminous paint (lead free) complete all as specified and as directed. |
| 15 | M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. |
| 16 | M & L for writing arrows amrking(upto 40cm long) as directed complete all as specified and as directed. |
| 17 | Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation, laying of pipe or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed. |
| 18 | Returning, filling, in including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed. |
| 19 | Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 20 | Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
