|
| 1 | BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CHIEF ENGINEER (AF) SHILLONG ZONE, SHILLONG. Name of Work: PROVISION OF MD ACCN FOR DSC NCs (E) CIVILIAN AND MES PERSONNEL AT (AF) STATION PANAGARH Contract No: CE(AF)SZ/PAN/ OF 2025-2026 File No: 88863/PAN/E8 Bidder Name : PRICE SCHEDULE : BOQ(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # SL No ITEM DESCRIPTION Item Code / Make QTY UNIT ESTIAMTED RATE Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE IN FIGURES TO BE ENTERED BY THE BIDDER RS. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT IN WORDS Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | Sch 'A' Part-I (BUILDING WORK)Details of prepriced Schedule is given in tender documents |
| 3 | Total amount of Such 'A' Part-II (SITE CLEARENCE, SITE DEVELOPMENT AND EARTH WORK)Details of prepriced Schedule is given in tender documents |
| 4 | Total amount of Such 'A' Part-III (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents |
| 5 | Total amount of Such 'A' Part-IV (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents |
| 6 | Total amount of Such 'A' Part-V (ROAD/PATH/CULVERT) Details of prepriced Schedule is given in tender documents |
| 7 | Total amount of Such 'A' Part-VI (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents |
| 8 | Total amount of Such 'A' Part-VII (SEWAGE DISPOSAL)Details of prepriced Schedule is given in tender documents |
| 9 | Total amount of Such 'A' Part-VIII (COMPOUND WALL,FENCING &STEEL GATE (03 Nos.) ) Details of prepriced Schedule is given in tender documents |
| 10 | Total amount of Such 'A' Part-XI (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents |
| 11 | Total amount of Such 'A' Part-XII (EXTERNAL ELECTRIFICATION)Details of prepriced Schedule is given in tender documents |
| 12 | SCHEDULE \\"A\\" PART -XI (MISCELLANEOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as \\"Rs 0.00\\" under Col.' F ' signifies this fact only. |
| 13 | INTERNAL ELECTRIFICATIONS&F modular TV socket single module, polycarbonate type complete with box all as specified & directed. |
| 14 | S&F modular Telephone socket single module, complete all as specified & directed. |
| 15 | S&F LED lamp 10 watt complete all as specified & directed. |
| 16 | Supply and fixing LED light fitting 2 feet, 1X10 W, 220 V, AC decoratve box type with driver including LED tube light connecting up wih three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 17 | SEWAGE DISPOSALM&L for construction of soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in M25/ SFRC cover, interconnecting pipes ofRCC/DWC complete filled with brick bats of size 2.4 m dia x 4.5 m deep complete all as specified and directed and shown in drawings. |
| 18 | M&L for construction of RCC Septic tank conventional designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc. for 150 users including RFR, removal complete all as specified and directed and shown in drawings. |
| 19 | EXTERNAL WATER SUPPLYSupply and Fixing ductile iron pipe 150mm dia, S/S including special class K9 supplied and laid complete all as specified and as directed. |
| 20 | S & F 3 layer PP-R (polypropylene random co-polymer) concealed pipes,160 mm dia,SDR11 (PN-10) UV stabilised and antimicrobial fusion welded havingthermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings laid in trenches complete all as specified and directed. Note: Rate quoted must be inclusive of all fittings such as union, socket, Tee reducer, bend, flange etc. |
| 21 | S & F 3 layer PP-R (polypropylene random co-polymer) concealed pipes,90 mm dia,SDR11 (PN-10) UV stabilised and antimicrobial fusion welded havingthermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings laid in trenches complete all as specified and directed.Note: Rate quoted must be inclusive of all fittings such as union, socket, Tee reducer, bend, flange etc. |
| 22 | S & F 3 layer PP-R (polypropylene random co-polymer) concealed pipes,63 mm dia,SDR11 (PN-10) UV stabilised and antimicrobial fusion welded havingthermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings laid in trenches complete all as specified and directed.Note: Rate quoted must be inclusive of all fittings such as union, socket, Tee reducer, bend, flange etc. |
| 23 | S & F 3 layer PP-R (polypropylene random co-polymer) concealed pipes,32 mm dia.SDR11 (PN-10) UV stabilised and antimicrobial fusion welded havingthermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings laid in trenches complete all as specified and directed.Note: Rate quoted must be inclusive of all fittings such as union, socket, Tee reducer, bend, flange etc. |
| 24 | Construction of brick massonary valve pit internal dimension 90x90x90cm with subclass B bricks in CM (1:6) and 15mm thick plastering in CM (1:4) inside the chamber and on the external portion exposed above ground level, 3mm thick MS sheet cover welded around with ms flat iron of size 40x6mm and MS angel iron frame of size 40x40x6mm with locking arrangement and painting with two coats of syhthetic enamel paint over a coat of red oxide primer including necessary earth work complete all as specified and directed. |
| 25 | Construction of brick massonary valve pit internal dimension 650x650x650 mm with subclass B bricks in CM (1:6) and 15mm thick plastering in CM (1:4) inside the chamber and on the external portion exposed above ground level, 3mm thick MS sheet cover welded around with ms flat iron of size 40x6mm and MS angel iron frame of size 40x40x6mm with locking arrangement and painting with two coats of syhthetic enamel paint over a coat of red oxide primer including necessary earth work complete all as specified and directed. |
| 26 | Supply & Fix Pump set centrifugal, electric driven, 5 HP,(Head = 25 mtr,Discharge = 625 LPM)supplied and installed including PCC foundation complete all as specified and as directed. (01 working + 01 standby) |
| 27 | Supply and fixing 6 Sqmm 3 core multistranded FRLSH copper conductor cable including PVC conduit and thimble/lugs of suitable size complete all as specified and directed |
| 28 | Foot valve confirming to IS 4038, supplied and laid complete of size 100 mm (4\\") dia complete with Gaskit, nuts, bolts and washer all as required complete all as specified and as directed. |
| 29 | Supply and installation with testing complete of microprocessor based digital water level indication device, operating on single phase supply direct display in 150 mm size digit system in meter/cubic meter of water of under ground sump ensuring alarm while water fall or rise over pre-determined limit with the following description: Note: (a) The entire unit must operate through a compact electronic circuit which must ensure reliable operation at 230 V+ 10% at 50 HZ + 5% with readable in digit display and alarm at low and high level of UG sump. (b) One circuit must be housed in high impact polystyrene moulded box with nylon moulded connections strips. The level system must be resistance/transducer type and resistive to corrosion and other contents available in water. (c) The whole unit must be controlled electronically and the upper level and lower level indications must be transmitted through highly sensitive micro switch. The complete unit must be in two parts. Each complete part must be fitted in MS CRS sheet box separately. One must be installed at UG sump/OH tank and second at pump House with proper powder coating paint with locking arrangements complete all as specified and as directed. |
| 30 | S&F flexible FRLSH copper cable 1.5 sqmm 4 core size from UG sump to pump house for connecting the both units of water level indicator and passing through PVC flexible/rigid conduit and fixing on walls wherever required complete all as specified and as directed. |
| 31 | S&F for MS reducer, bail plug, Well cap, MS strip for cenetring, MS iron clamps, electric logging and sample strata box complete all as specified and as directed. |
| 32 | M & L for Trial bore of 250 mm dia upto 200 meter depth below ground level in any kind of soil strata including hard stone/boulder etc. complete all as specified and as directed. |
| 33 | M & L for Trial bore of 250 mm dia exceeding 200 meter depth below ground level in any kind of soil strata including hard stone/boulder etc. complete all as specified and as directed. |
| 34 | M & L for Development of tube well with compressed air and there after over pumping muddy water with 25% extra capacity pump by pumping complete all as specified and as directed. |
| 35 | M & L for Yield test for the bore well by continuously pumping for 16 hours to L for determine safe pumping yield complete all as specified and as directed. |
| 36 | Supply and lowering threaded PVC casing pipe of 200 mm dia nominal size (Internal), 10 mm wall thickness (Min), class CM of suitable length including socket and jointing materials, complete all as specified and as directed Make- Supreme/ Oriplast/ SFMC |
| 37 | Supply and lowering and fixed in position 200 mm dia nominal size (Internal), PVC screen slotted pipe, 10mm wall thickness (Min), of 3 mtr length each pipe including socket and jointing materials, complete all as specified and as directed . Make- Supreme/ Oriplast/ SFMC |
| 38 | Supply & lay PVC insulated submersible cable, flat flexible copper stranded conductor of size 6 sqmm 3 core, 1100 V for submersible pump incl GI clamp for fixing cable to the coloum pipe complete all as specified and as directed |
| 39 | M & L for fabricating of MS nipple 0.6mtr long 150 mm dia threaded both side externally. Flanged one end with heavy duty flange drilled four holes and provision of grove for cable enterance system complete all as specified and as directed |
| 40 | S & F Steel wire rope 8 mm, including required size clamp nut and bolt for hanging submersible pump and motor complete all as specified and as directed |
| 41 | M & L Water meter cast iron body both end flange ISI Mark suitable for fixing on 6\\" dia line pipe including nut, bolt washer and rubber gasket required for joint complete all as specified and as directed |
| 42 | M & L for water pressure gauge dial type with central knob 4\\" dia having pressure range 0 to 10 Kg/cm2 complete all as specified and as directed |
| 43 | Supply & Installation of submersible pumping set 10 HP , electric driven 415 V, TP suitable for 200/250 mm dia bore well (Casing pipe size 200/250 mm) complete all as specified and as directed. |
| 44 | Supply and installation of Iron removal plant complete with Pressure Filter, Catalytic media, Air compressure, Back washing facility including RCC foundation of Capacity 15000 GPH complete all as specified and as directed. |
| 45 | Supply, fix Chlorine dosing pump RPQ 40HD Single Head High Pressure Adjustable Gear Motor Dosing Pump Suitable to dose AQUAFIT/ CHLOROTECH- 90 /PURICHLORE chlorine granular cap. 40 USGPD at 100 psig MODEL: RPQ 40HD of make- RMCO and other equivalent make of Pearl filter, Toschcon jesco etc. and FRP solution preparetion tank with lid, port hole, inlet / outlet / drain connection, level gauge and fitted with speed reducing motor & SS-316 agitator combined with dosing tank with lid, port hole, inlet / outlet / drain connection, level gauge etc.having Preparetion tank - 100 ltrs, Dosing tank - 100 ltrs, model CDS- 1010 of make RMCO and other equivalent make of Pearl filter, Toschcon jesco etc. etc (01 working+ 01 stand by) complete all as specified and as directed. |
| 46 | Development of trial bore by reaming in step From 250mm to 350 mm upto 220 metre depth complete all as specified and as directed. |
| 47 | Development of trial bore by reaming in step From 350mm to 450 mm upto 220 metre depth complete all as specified and as directed. |
| 48 | Development of trial bore by reaming in step From 450mm to 525 mm upto 220 metre depth complete all as specified and as directed. |
| 49 | Meterial and labour for factory made LT distribution panel cubical outdoor type for 10 HP motor Submersibal Pump, floor mounted made out of 2 mm thick CRCA sheet duly powder coated weather proof/vermin proof with locking arrangement, front and rear opening with 3 phase 4 wire bus bar & cable chamber and copper bus bars of capacity 100 Amps ,IP-54 protection, confirming to IEC-61439 part 1 & 2, Panel shall have certificate of Salt Mist test as per IEC-60068-2-11 (Anti corrossion) and Damp Heat cycling Test as per IEC:- 60068-2-30, including voltmeter, ammeter with indication lamps, suitable size for accomodate one incoming and three out going MCCBs including painting with two coats of synthetic enamel paint over a coat of red oxide primer including suitable size plat form and angle iron legs with 50 x 6mm thick & foundation etc with the following switch gears complete all as specified and directed.:- Panel-06INCOMING(a) MCCB,4 Pole,40 A ,18KA -01No (I/C)(b) Copper busbar strip (30 X3) 100A with PVC colours sleeve mounted on heavy duty PVC heat shrinkable base insulators.(c) Indicator lamp set of 3 (red, yellow and blue) 01 set(d) Basic Multifunction meter Measuring V,A,F,PF,KW,KVA,KWH/KVAh, (MFM 4405 LED meter Cl 0.5S with RS485 ), Make- L&T-01 no.(e) 40/5A, CL-1 15VA CURRENT TRANSFORMER TAPE WOUND TYPE-03 No.OUTGOING(a) MCCB of 40 Amps ,18KA, 4 pole capacity-01 nos(b) submersible pump starter for 10 HP -02 Nos(c) Digital type ammeter 0-50 amp with selector switch including suitable CT-01 No.(d) Single phase preventor 415 V type SDz5 -01 set(e) Motor protection ralay MM10 -01 No(f) One extra space for Future expansion |
| 50 | Material and labour for factory made LT distribution panel cubical outdoor type for 5 HP Centrifugal Pump, floor mounted made out of 2 mm thick CRCA sheet duly powder coated weather proof/vermin proof with locking arrangement, front and rear opening with 3 phase 4 wire bus bar & cable chamber and copper bus bars of capacity 100 Amps ,IP-54 protection, confirming to IEC-61439 part 1 & 2, Panel shall have certificate of Salt Mist test as per IEC-60068-2-11 ( Anti corrossion) and Damp Heat cycling Test as per IEC:- 60068-2-30, including voltmeter, ammeter with indication lamps, suitable size for accomodate one incoming and three out going MCCBs including painting with two coats of synthetic enamel paint over a coat of red oxide primer including suitable size plat form and angle iron legs with 50 x 6mm thick & foundation etc with the following switch gears complete all as specified and directed.:- Panel-07INCOMING(a) MCCB,4 Pole,40 A ,18KA -01No (I/C)(b) Copper busbar strip (30 X3) 100A with PVC colours sleeve mounted on heavy duty PVC heat shrinkable base insulators.(c) Indicator lamp set of 3 (red, yellow and blue) 01 set(d) Basic Multifunction meter Measuring V,A,F,PF,KW,KVA,KWH/KVAh, (MFM 4405 LED meter Cl 0.5S with RS485 ), Make- L&T-01 no.(e) 40/5A, CL-1 15VA CURRENT TRANSFORMER TAPE WOUND TYPE-03 No.OUTGOING(a) MCCB of 40 Amps ,18KA, 4 pole capacity-01 nos(b) Centrifugal pump DOL starter for 5 HP -02 Nos(c) Digital type ammeter 0-50 amp with selector switch including suitable CT-01 No.(d) Single phase preventor 415 V type SDz5 -01 set(e) Motor protection ralay MM10 -01 No(f) One extra space for Future expansion |
| 51 | M & L Cast Iron Air Valves with two air Outlets, 150 mm dia bore IS-14845 and fixing Up in cast iron water supply mains complete with Gaskit, nuts, bolts and washer all as required complete all as specified and as directed |
| 52 | M&L for Chemical, Bacteriological, physical test analysis of Raw water sample from the borewell shall be carried out from National Test House Kolkata or any Govt. Lab and test report shall be submitted to department after taking of sample of raw water complete all as specified and directed. The test results should remains in pemisible limit for 6 month duration. The following parameters should be tested Following tests should be done Physical test: 1) Colour 2)Turbidity 3) Total dissolved solid-TDS 4) Suspended solid 5) Odour 6) Taste Chemical test: 1) Aluminium 2) Copper 3) Iron total 4) Manganese 5) Sodium 6)Zinc 7) Chloride 8) Fluoride 9) Nitrate 10) Nitrite 11) Sulphate 12)Arsenic 13) Barium 14) Cadmium 15) cyanide 16) Lead 17) Mercury 18) Selenium 19) Hydrogen sulphide 20) Total Hardness Bateriological test:- 1)Total Bacteria 2) Coliform 3) E coli 4) Salmonella SP |
| 53 | EXTERNAL ELECTRIFICATIONMaterial and labour for LT distribution panel Indoor type floor mounted made out of 3.15 mm thick CRCA sheet and angle Iron frame of size 50x50x6mm weather proof/ vermin proof with locking arrangement and bottom \\"C\\" chanel with 3 phase, one neutral,4 wire copper bus bar(size 50 X 6mm) of capacity 100 Amps, 4pole, 50 KA, IP-54 protection, confirming to IEC-61439 part 1 & 2, Panel shall have certificate of Salt Mist test as per IEC-60068-2-11 (Anti corrossion) and Damp Heat cycling Test as per IEC:- 60068-2-30, indication lamp, digital Voltmeter, Ammeter with selector switch, size of panel suitable to accomodate one incoming and Four out going MCCBs including painting with two coats of synthetic enamel paint over a coat of red oxide primer including suitable size plat form and angle iron legs of 50 x 6mm thick & foundation etc with the following switch gears complete all as specified and directed.- (Main LT Panel 1)(a) MCCB 500Amps, 35KA 415V 4 POLE -1No.(I/C)(b) Digital type ammeter - 01 No.(I/C) (c) Digital type Voltmeter-01 No.(I/C)(d) 500/5A, CL-1 15VA CURRENT TRANSFORMER TAPE WOUND TYPE-03 No.(I/C)(e) Indicator lamp(RYB)-03 No.(I/C)(f) MCCB 200 A, 35 KA, 4 Pole 02 Nos(O/G)(g) MCCB 100 A , 25 KA, 4 Pole 03 Nos(O/G)(h) MCCB 63 A , 25 KA, 4 Pole 01 Nos(O/G) |
| 54 | Material and labour for LT distribution panel outdoor type floor mounted made out of 3.15 mm thick CRCA sheet and angle Iron frame of size 50x50x6mm weather proof/vermin proof with locking arrangement and bottom \\"C\\" chanel with 3 phase, one neutral, 4 wire copper bus bar(size 50 X 6mm) of capacity 160 Amps, 4pole, 50 KA, IP-54 protection, confirming to IEC-61439 part 1 & 2, Panel shall have certificate of Salt Mist test as per IEC-60068-2-11 (Anti corrossion) and Damp Heat cycling Test as per IEC:- 60068-2-30, indication lamp, digital Voltmeter, Ammeter with selector switch, size of panel suitable to accomodate one incoming and four outgoing MCCBs including painting with two coats of synthetic enamel paint over a coat of red oxide primer including suitable size plat form and angle iron legs of 50 x 6mm thick & foundation etc with the following switch gears complete all as specified and directed. -(Panel -2)(a) MCCB 100Amps, 25KA 415V 4 POLE -1No.(I/C)(b) Digital type ammeter - 01 No.(I/C) (c) Digital type Voltmeter-01 No.(I/C)(d) 125/5A, CL-1 15VA CURRENT TRANSFORMER TAPE WOUND TYPE-03 No.(I/C)(e) Indicator lamp(RYB)-03 No.(I/C)(f) MCCB 40 A, 16 KA, 4 Pole 03 Nos(O/G)(g) MCCB 25 A , 16 KA, 4 Pole 01 Nos(O/G) |
| 55 | Material and labour for LT distribution panel outdoor type floor mounted made out of 3.15 mm thick CRCA sheet and angle Iron frame of size 50x50x6mm weather proof/ vermin proof with locking arrangement and bottom \\"C\\" chanel with 3 phase, one neutral, 4 wire copper bus bar (size 50 X 6mm) of capacity 500 Amps, 4pole, 50 KA, IP-54 protection, confirming to IEC-61439 part 1 & 2, Panel shall have certificate of Salt Mist test as per IEC-60068-2-11 (Anti corrossion) and Damp Heat cycling Test as per IEC:- 60068-2-30, indication lamp, digital Voltmeter, Ammeter with selector switch, size of panel suitable to accomodate one incoming and Four outgoing MCCBs including painting with two coats of synthetic enamel paint over a coat of red oxide primer including suitable size plat form and angle iron legs of 50 x 6mm thick & foundation etc with the following switch gears complete all as specified and directed.- (Panel -3)(a) MCCB 250Amps, 35KA, 415V 4 POLE -1No.(I/C)(b) Digital type ammeter - 01 No.(I/C) (c) Digital type Voltmeter-01 No.(I/C)(d) 200/5A, CL-1 15VA CURRENT TRANSFORMER TAPE WOUND TYPE-03 No.(I/C)(e) Indicator lamp(RYB)-03 No.(I/C)(f) MCCB 40 A, 16 KA, 4 Pole 07 Nos(O/G) |
| 56 | Material and labour for LT distribution panel outdoor type floor mounted made out of 3.15 mm thick CRCA sheet and angle Iron frame of size 50x50x6mm weather proof/vermin proof with locking arrangement and bottom \\"C\\" chanel with 3 phase, one neutral,4 wire copper bus bar(size 50 X 6mm) of capacity 200 Amps, 4pole, 50 KA, IP-54 protection,confirming to IEC-61439 part 1 & 2, Panel shall have certificate of Salt Mist test as per IEC-60068-2-11 (Anti corrossion) and Damp Heat cycling Test as per IEC:- 60068-2-30, indication lamp, digital Voltmeter , Ammeterr with selector switch, size of panel suitable to accomodate one incoming and Four out going MCCBs including painting with two coats of synthetic enamel paint over a coat of red oxide primer including suitable size plat form and angle iron legs of 50 x 6mm thick & foundation etc with the following switch gears complete all as specified and directed.- (Panel - 4)(a) MCCB 100Amps, 25KA 415V 4 POLE -1No.(I/C)(b) Digital type ammeter - 01 No.(I/C) (c) Digital type Voltmeter-01 No.(I/C)(d) 125/5A, CL-1 15VA CURRENT TRANSFORMER TAPE WOUND TYPE-03 No.(I/C)(e) Indicator lamp(RYB)-03 No.(I/C)(f) MCCB 40 A, 16 KA, 4 Pole 03 Nos(O/G)(g) MCCB 25 A , 16 KA, 4 Pole 03 Nos(O/G) |
| 57 | Material and labour for LT distribution panel outdoor type floor mounted made out of 3.15 mm thick CRCA sheet and angle Iron frame of size 50x50x6mm weather proof/vermin proof with locking arrangement and bottom \\"C\\" chanel with 3 phase, one neutral,4 wire copper bus bar(size 50 X 6mm) of capacity 1000 Amps, 4pole, 50 KA,IP-54 protection,confirming to IEC-61439 part 1 & 2, Panel shall have certificate of Salt Mist test as per IEC-60068-2-11 (Anti corrossion) and Damp Heat cycling Test as per IEC:- 60068-2-30, indication lamp, digital Voltmeter, Ammeter with selector switch, size of panel suitable to accomodate one incoming and Four outgoing MCCBs including painting with two coats of synthetic enamel paint over a coat of red oxide primer including suitable size plat form and angle iron legs of 50 x 6mm thick & foundation etc with the following switch gears complete all as specified and directed.- (Panel - 5)(a) MCCB 63Amps, 25KA 415V 4 POLE -1No.(I/C)(b) Digital type ammeter - 01 No.(I/C) (c) Digital type Voltmeter-01 No.(I/C)(d) 100/5A, CL-1 15VA CURRENT TRANSFORMER TAPE WOUND TYPE-03 No.(I/C)(e) Indicator lamp(RYB)-03 No.(I/C)(f) MCCB 25 A, 16 KA, 4 Pole 04 Nos(O/G) |
| 58 | M&L for boring of holes under road, pavement, hard standing by trenchless technology/ manual excavation as necessary including machine, tools etc as per site requirment complete all as specified and as directed |
| 59 | Supply and Fix Octagonal Street Light Pole hot dip galvanised Mild 08 Mtr Long including suitable size of bracket for fixing of street light complete with foundation and fixing accesories like Nut bolts etc complete all as specified and as directed. |
| 60 | Material & Labour for 10 cm dia 8 mm thick CI route indicator HT/LT in round shape fixed on 45 cm long angle iron of size 25x25x4mm complete embedded in PCC 1:3:6 type C-1 of size 250 x 250 x 250mm block duly marked/ engraved HTcable 11 KV / LT cable including excavation and returning filling and removal of surplus soil (HT cable brown colour and LT cable blue colour) including colour of angle iron complete all as specified and as directed. |
| 61 | Meterial and labour for street light timelite distribution boards 32 Amp, 3 pole/ 230 Volt with Astronomical time switch panel cubical outdoor type floor/ pole mounted including connecting cable incoming and out going with lugs and thimble and MCCB 4 Pole 32 Amp 10KA complete all as specified and directed. |
| 62 | Supply, installation, testing and commissioning 250KVA, 11/0.433KV, Trolley mounted outdoor type, Step down, ONAN, copper wound, 3 phase, 50 C/s Distribution Transformer conforming to IS - 2026 having Vector Group Ref. Dyn-11, with latest amendment complete with Cable end Box on both HV and LV Side and all standard accessories complete with first filling insulating of New Oil conforming to IS-335/1993. The Transformer will be provided with off circuit Tap Switch of range +/- 2.5%, +/- 5% & - 7.5% in step of 2.5% on HV side with initial filling of transformer oil complete all as specified and as directed and having following accessories:(a) Oil level indicator minimum & maximum level marking. (b) C. I. rollers – 4 Nos.(c) on conservator tank and drain plug with main tank. (d) Lifting Lug for Transformer and cover(e) Rating & Diagram & terminal marking plate.(f) Explosion Vent (g) Silica gel Breather.(h) Earthing Terminal.(j) Air release plug.(k) Dial type Thermometer.(m) Drain & Filter Valve.(n) Cooling Radiator.(p) Ratio switch on HV side. |
| 63 | Supply only Rubber mat 1mx 2m x10mm complete all as specified and directed. |
| 64 | Supply only Rubber mat 1mx 2m x19mm complete all as specified and directed. |
| 65 | Supply only Electric rubber Hand globe 11 KV complete all as specified and directed. |
| 66 | M&L for earthing complete with galvanised steel earth plate 600mm x 600mm x6mm thick, burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides, connected to GI strip 32mm x 6mm as earth lead upto 7.5 mtr long distance by means of bolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:2:4) type B1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 6mm dia mild steel bar @100mm centre to centre both ways with one handle for lifting made out 6mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 40mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed.NOTE : (i) The earthing pit should be provided with proper earth pit and pit cover. Pit cover should be painted with synthetic enamel paint of approved colour and pit number to be marked on pit cover as per colour code followed in AF Station.(ii) If the desired earth registance is not achive during testing as per IS the complete earthing shall be carried out by the contractor at his own cost and no extra claim shall be admissable. |
| 67 | M&L for earthing complete with galvanised steel earth plate 600mm x 600mm x 3.15mm thick, burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides, connected to 20mm x 3mm copper strip as earth lead upto 7.5 mtr long distance by means of bolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:2:4) type B1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 6mm dia mild steel bar @100mm centre to centre both ways with one handle for lifting made out 6mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 40mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed.NOTE : (i) The earthing pit should be provided with proper earth pit and pit cover. Pit cover should be painted with synthetic enamel paint of approved colour and pit number to be marked on pit cover as per colour code followed in AF Station.(ii) If the desired earth registance is not achive during testing as per IS the complete earthing shall be carried out by the contractor at his own cost and no extra claim shall be admissable. |
| 68 | M&L for earthing complete with galvanised steel earth plate 600mm x 600mm x6mm thick, burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides, connected to galvanised earth lead wire 4.0 mm dia as earth lead upto 7.5 mtr long distance by means of bolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:2:4) type B1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 6mm dia mild steel bar @100mm centre to centre both ways with one handle for lifting made out 6mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 40mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed.NOTE : (i) The earthing pit should be provided with proper earth pit and pit cover. Pit cover should be painted with synthetic enamel paint of approved colour and pit number to be marked on pit cover as per colour code followed in AF Station.(ii) If the desired earth registance is not achive during testing as per IS the complete earthing shall be carried out by the contractor at his own cost and no extra claim shall be admissable. |
| 69 | DG SETSupply, installation, testing and commissioning of Trolly mounted Silent Diesel Engine driven generating set of cap 20 KVA, 0.8 PF, at NTP conditions, complete with AMF panel, control panel having meters sound proof canopy considering all derating factors with mounted on common base frame along with sound proof enclosure (acoustic enclosure), 1500 RPM, with silencer pipe independently supported from Engine to outside upto 01 meter , AVM padded foundation as per manufacturer's design, cold starting kit, battery start with suitable size cable for connection from DG Set to panel board complete with and incl the following :- (a) PRIME MOVER: Vertical diesel engine of suitable cap water cooled (Radiator mounted), closed circuit as per BS 649 or IS 10002 direct injection type turbo charged electric starting system having rated speed 1500 RPM. The DG Set shall be capable of running 24 hrs continuously with 10 % overloading for 01 hrs in every 12 hrs as per BS 5514/BS649. Engine shall be equipped with all standard fitting as per manufacturer recommendation and mounted on common base frame with following accessories as per manufacturer design :- |
| 70 | i) Fuel filterii) Battery charging ammeter.iii) Ignition key/ starting with push button switch.iv) Lubricating oil pressure gauge.v) A-1 governor controlling.vi) Oil temperature gauge.vii) Water temperature gauge.viii) Lubricating oil coolant heater.ix) flywheel housing with flywheel to suit double bearing coupled alternator.x) Air cleaner dry type with vaccum indicator.xi) Lub-oil filter with filter elementxii) Radiator with fan.xiii) Corrosion inhibitor coolant.xiv) 12 V -01 Nos starting equipment comprising with the following :-(ab) Battery charging alternator with inbuilt regulator.(ac) Starter motor of suitable capacity.(ad) Battery leads (copper cable) of suitable of size with brass thimbles and terminal. Make of engine:-Cummins/ Ashok Leyland/ Kirloskar Green. |
| 71 | (b) ALTERNATOR :- Alternator rating 20KVA/18 KW, 03 phase 50 cycles, 415 Volts, 04 wires supply at NTP 0.8 PF running @ 1500 RPM self excited, self regulated mounted on a strong fabricated steel frame suitable for mounting on permanent foundation to be coupled with the above engine. The alternator shall be confirming to BS - 2613 or IS-4722. Make of Alternator:- Alstom/ Siemens/ Kirloskar Electric. (c) ACOUSTIC ENCLOSURE: Supply & install of Acoustic Enclosure as per following:- (i) DG set shall be fitted with acoustic enclosure suitable for 20 KVA as per manufacturer instruction and confirming to latest CPCB IV+ norms ii) The exhaust system and noise suppressor shall be provide with thermal insulation, to prevent excess heat radiation on the engine and safe for operator.iii) Absorption type non resistance Residential silencer insulated from inside with glass wool shall be provided to suppress exhaust noise from the engine. |
| 72 | (d) CONTROL PANEL:- CPRI approved Alternator control panel along with self regulated AVR system inbuilt, cubical type with internal copper wiring for 20 KVA alternator, 415 V 3 phase , 04 wire, 50 Hz, fabricated out of 14/16 gauge CRCA sheet painted internally and externally with 02 coats of synthetic enamel paint over 01 coat of primer including following accessories as per manufactures design :-(i) Digital Volt meter 0-500 Volts . Make: AE/ Legrand(ii) Digital ammeter AE/ Legrand(iii) Frequency meter digital type built in. Make: AE/ Legrand(iv) Required Nos/ rating/capacity of MCCB as recommended by manufacturer. Make: Legrand/L&T (D-Shine)(v) Set of copper bus bar for suitable capacity.(vi) Set of indicator lamps LED type(Red, Yellow, Blue).(vii) Engine protection and AC alternator protection .(viii) Digital energy meter having facility to show KWH, KW, KVA, power factor reading etc. Make: AE/ Legrand(ix) Power contactor suitable for 20 KVA DG set incl over current, earth fault protection relays, reverse power relay, alarm for high water/lub oil temp and low lub oil pressure complete with cable gland plate for cable entry etc. |
| 73 | (e) OTHER FITTINGS:(i) Battery charger having electric circuit consisting of triods, rectifier, capacitor and resistor etc.Note:- The battery charger should be able to charge the battery at all the time whenever electrical supply given to the battery charger through control panel are electric power point. (f) FUEL TANK of suitable capacity as per manufacturer instructions capable to store 12 hrs running of DG set, as per manufacturer design, with all pipes connecting upto fuel pumps including oil level indicating gauge in ltrs, drain and air vent plug etc.(i) The contractor shall supply 01 Years maint spare for the above Gen Set(iii) Fuel/ oil required for load test shall be arranged by the contractor and cost thereof is deemed to be included in the lump sum amount quoted by the contractor.(g) PCC / RCC foundation as per manufacturers design.Note:- (i) Contractor will satisfactorily conduct load test of DG set for 12 hours including run on 10% overload for 1 hour at their own risk, cost and arrangement.(ii) Testing eqpt will be arranged by the contractor. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
