|
| 1 | Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in-charge. DSR 2023,15.1 |
| 2 | P/Laying integral cement based water proofing treatment BRICK COBA i/c preperation of surface as required for treatment of roofs, consisting of following operations : a) Applying a slurry coat of neat cement using 2-75 kg/sqm of cement admixed with water proofing compound confirming to IS. 2645 i/c adjoining walls upto 300 mm height. b) Laying brick bats with mortar with 50% of cement mortar 1:5(1 cement : 5 coarse sand) admixed with water proofing compound conferming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 admixed with water proofing compound confirming to IS :2645 to required slope i/c rounding of junctions of walls and slabs . c) After 2 days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admuxed with water proofing compound confirming to IS : 2645. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1 : 4 admixed with water proofing compound confirming to IS. 2645 i/c laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300 x 300 mm sqare 3mm drrp. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test with average thickness of 120 mm and minimum thickness at khurra as 65 mm. .(DSR 2023,,22.7.1) |
| 3 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. DSR 2023, 12.22 |
| 4 | M.S. iron work in tubular work such as trusses,built up gates etc i/c cutting,welding & rivetting as required for proper completion of work.(DSR 2023, 10.16.3) |
| 5 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. 8.8.1 Wedge expansion type Fastener with threaded dia 12 mm . DSR 2023, 8.8.1.3 |
| 6 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR 2023, 15.56 |
| 7 | 12 mm cement plaster of mix 1:4 (1cement: 4 coarse sand) Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.DSR 2023, 13.4.1 & 13.21 |
| 8 | Laying & Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :above 40 mm nominal bore Based on DSR 2023,15.44.2 (As per Magh Mela161.40x2=322.80x0.735x1.03=244.38) |
| 9 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.DSR 2023,15.3 |
| 10 | Hire charges of JCB machine i/c drier fuel oil etc. Complete as required. |
| 11 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil. |
| 12 | Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 120 cm girth upto and including 240 cm girth. DSR 2023, 2.33.3 |
| 13 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work: 50 mm dia nominal bore. DSR 2023, 18.12.6 |
| 14 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore .DSR 2023,18.17.4 |
| 15 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore. DSR 2023, 18.12.3 |
| 16 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 50 mm nominal bore. DSR 2023, 18.47.6 |
| 17 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 25 mm nominal bore. DSR 2023, 18.47.3 |
| 18 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR 2023, 15.60 |
| 19 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. DSR 2023, 15.12.1 |
| 20 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) DSR 2023, 6.13.2 |
| 21 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. DSR 2023, 9.20.2 |
| 22 | Approximate cost of I.S.I. marked oxidized iron fittings with screws for doors and windows etc. Excluding hinges complete.(S.I.No.471Prj schedule) |
| 23 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) DSR 2023, 14.5.1 |
| 24 | R.C.C.work in beams,suspended floors, roofs having slope up to 15\\", landing, balconies, shelves,chajjas, lintels, bends, plain window sill, staircases and spiral staircases above plinth level up to floor five level i/c the cost of centering, shuttering, finishing and excluding reinforcement with 1:1.5:3 cement coarse sand and 2cm gauge stone grit i/c supply of all materials,labour and T&P etc. as required for proper completion of the work.(DSR 2023, 5.3) |
| 25 | M.S.(Tor steel or plain) in plain work such as R.C.C. or R.B. work i/c bending for proper shape and i/c supply of steel & its wastage complete.(DSR 2023, 5.22A.1) |
| 26 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. DSR 2023, 13.112.1 |
| 27 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(DSR 2023, 13.80) |
| 28 | Brick work with common burnt clay F.P.S. (non modular) bricks ofclassdesignation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand). DSR 6.1.1 |
| 29 | 12 mm cement plaster of mix 1:4 (1cement: 4 coarse sand) Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.DSR 2023, 13.4.1 |
| 30 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) DSR 2023, 15.2.1 |
| 31 | 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. DSR 2023, 11.4 |
| 32 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. DSR 2023,11.13.1 |
| 33 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm. DSR 2023, 14.77 |
| 34 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR 2023, 13.91 |
| 35 | S/F of 110mm dia. P.V.C. pipe 6.o kg/cm2 i/c bends,tee ,socket etc and pasting solution complete..(Sl.No.32iii,P-87,Ch.-23,Aligarh schedule) |
| 36 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer complete.(DSR 2023, 13.41.1) |
| 37 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand). DSR 2023,13.7.1 |
| 38 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR 2023, 4.1.2 |
| 39 | Painting or varnishing work in small areas on new wood or iron work with one coat of readymixed priming paint and two coats of approved superior quality ready mixed paint or varnish i/c supply of all materials,labour and T&P etc.required for the proper completion of the work..(DSR 2023, 13.62.1) |
| 40 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. DSR 2023, 5.9.3 |
| 41 | Supply and fixing of vitrified tiles(Kajaria, Bell, J & J or Somani) in flooring or skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry ,jointing and polishing complete i/c supply of all materials,labour and T&P etc.required for proper completion of the work.(DSR 2023, 11.41A.1.1) |
| 42 | S/F of anodized aluminium work for partition door and sliding window with standard built up tubular section having 1.5mm thick aluminium section of approved make ISI mark 20 microns anodizing fixed with fasteners, nut,rowel plug screws and fixing with aluminium clip , cleat angle, aluminium beading with 5mm thick glass or 12mm thick both side laminated board ISI mark .The rate will including cost of materials,fixtures etc.,handles,locks, screw necessary bending for proper completion of the work.as per direction of Engineer in Charge.(Sl.No.36A,Ch.9,Pg.5,Mnpr SOR22) |
| 43 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 fine sand derived from natural sources :10graded stoneaggregate 40 mm nominal size derived from natural sources) DSR 2023, 4.1.11 |
| 44 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from naturalsources : 4 graded stone aggregate 12.5mm nominal size derived fromnatural sources ) (DSR 2023,4.10) |
| 45 | Construction of granular sub-based by providing close graded with Material conforming to Grade-II (size range 53mm to 0.075mm) having CBR Value-25 specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to wor ksite, for all leads & lifts, spreading in uniform layers of specified thickness with motor garder on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. (DSR 16.78.2) |
| 46 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.DSR 2023, 16.91.2 |
| 47 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) DSR 2023, 15.2.2 |
| 48 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) DSR 2023, 5.1.2 |
| 49 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. sqm 669.5 DSR 2023, 5.9.2 |
| 50 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.DSR 2022, E&M, 1.8.3 |
| 51 | S/F of power plug with 15A/250V flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mmx100mmx50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.(S.I.No. 1139 ) |
| 52 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. DSR 2022 E&M, 1.14.2 |
| 53 | Supply & Fixing of LED tube light batten fitting suitable for 18-22 watt LED tube light on surface Complete in all respect. CAT-AA (S.I.No. 23.08, Pg.16, SOR Elect.2024) |
| 54 | S/Fixing of 16Amp. 240 V SPN metal clad rewirable type switch fuse unit on MDFEG/ Teak wood board of cat. B complete in all respects.(S.I.No. 301) |
| 55 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 2 X 4 sq. mm earth wire. DSR 2022 E&M, 1.14.3 |
| 56 | Brick work with common burnt clay F.P.S.(Non modular) bricks of class designation 100 in super structure above plinth level in1:4 cement and coarse sand mortar i/c supply of all materials,labour,T&P etc.complete.(DSR 2023, 6.4.1) |
| 57 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar. DSR 2023, 15.7.4 |
| 58 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): From brick work in cement mortar. DSR 2023, 15.8.3 |
| 59 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) DSR 2023,13.16.1 |
| 60 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster. DSR 2023, 13.9.2 |
| 61 | Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 62 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. DSR 2023, 2.27 |
| 63 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. DSR 2023, 11.3.1 |
| 64 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from naturalsources : 4 graded stone aggregate 20 mm nominal sizederived from natural sources) DSR 2023, 4.1.3 |
| 65 | Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete : Red sand stone slab 40 to 50 mm thick DSR 2023, 12.23.1.1 |
| 66 | P/F angle Tee iron frames for door, windows and ventilators of M.S.angle sections of size 35x35x5 mm , joints mitred and welded by angle iron 35x35x5mm or 35x5mm flat pieces to the existingTee iron frame or to the wall with dash fastener, i/c fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per direction of Engineer in Charge (DSR 2023, 10.13.1) |
| 67 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever) conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required: White VitreousChina Orissa pattern W.C. pan of size580x440 mm with integral type foot rests(DSR 2023, 17.1.1) |
| 68 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required : W.C. pan with ISI marked white solid plastic seat and lid(DSR 2023, 17.2.1) |
| 69 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in charge. .(DSR 2023, 17.16A) |
| 70 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conformingto IS : 15622, of approved make, in all colours, shades, except White,Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sq.m including pointing the joints with white cement and matchingpigments etc., complete.(DSR 2023, 11.38) |
| 71 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(DSR 2023, 18.48) |
| 72 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes. DSR 2023, 18.8.1 |
| 73 | S/F of 15mm dia.C.I. bib cock of approved quality complete. |
| 74 | S/F of 75mm dia. P.V.C. pipe i/c bends,tee ,socket etc and pasting solution complete.(Sl. No.32i,P-87,Ch.23) |
| 75 | Finishing walls with 100% Premium acrylic emulsion paint havingVOClessthan 50 gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance, dirt resistance exterior paint of requiredshade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10sqm. Over and including priming coat of exterior primerapplied @ 0.90 litre/10 sqm. (DSR 2023, 13.48A.1) |
| 76 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes(DSR 2023, 18.7.3) |
| 77 | P/F 15mm dia. PVC.union of approved quality complete. |
| 78 | Providing & fixing PVC gate valve of approved quality (screwed end) 25 mm nominal bore. |
| 79 | P/F factory made ISI marked steel glazed doors , windows and ventilators and excluding cost of glass panes but i/c cost of all materials, its fabrication, nuts and bolts , holdfasts, labour and T&P etc. Required for proper completion of the work and also i/c cost of handles, stays etc. all complete as per direction of Engineer in Charge (DSR 2023,,10.11.1) |
| 80 | Fixing door chaukhats( wood/Metal) in existing opening i/c embedding chaukhats in floors or walls cutting masonary for holdfasts, embedding holdfasts in cement concrete blocks of size 15x10x10 cm with cement concrete in 1:3:6 (1cement, 3 coarse sand and 6 graded stone grit 20mm size , all complete as per direction of E/I complete(DSR 2023,,14.2.1) |
| 81 | Fixing window chaukhats( wood/Metal) in existing opening i/c embedding chaukhats in floors or walls cutting masonary for holdfasts, embedding holdfasts in cement concrete blocks of size 15x10x10 cm with cement concrete in 1:3:6 (1cement, 3 coarse sand and 6 graded stone grit 20mm size , all complete as per direction of E/I complete(DSR 2023,,14.2.2) |
| 82 | P/Fsteel work welded in built up sections/framed work in gratings,guard bar, ladder and stircase railing of approved quality and drawing i/c supply of all materials, labour & T&P etc. complete as per direction of Engineer in Charge (DSR 2023,,10.25.2) |
| 83 | Making connection with PVC water storage tank with G.I. inlet and outlet i/c supply of tank nipple etc. as required complete in all respects. |
| 84 | Constructing masonry Chamber 60x60x75 cm inside, in brick workin cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameterand 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mmnominal size ) , i/c necessary excavation, foundation concrete 1:5:10(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominalsize) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick, finished with a floating coat of neat cementcomplete as per standard design :With common burnt clay F.P.S.(non modular) bricksof class designation 7.5 (DSR 2023,18.33.1) |
| 85 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap. DSR 2023, 17.7.4 |
| 86 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm. DSR 2023, 17.32.2 |
| 87 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia. DSR 2023, 17.28.1.1 |
| 88 | S & F surface/Flush mounting 4ways TPN distribution board with additional metal door without MCB of Cat.A complete in all respect,as directed at site by Engineer in charge. (DSR 2022E&M, 2.4.2) |
| 89 | S & F surface/Flush mounting 6 ways SPN distribution board with additional metal board without MCB of Cat. A complete in all respect,as directed at site by Engineer in charge. (DSR 2022E&M, 2.3.1) |
| 90 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.DSR 2022, E&M, 1.8.3 |
| 91 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire.& Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.3 pin 5/6 amp socket outlet (DSR 2022E&M, 1.14.1+1.24.4) |
| 92 | Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with one number 2.5 sq. mm. multistrand copper conductor cable as earth continuity wire drawn in conduit. complete in all respect.(DSR 2022E&M, 1.14.3) |
| 93 | Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with one number 1.5.5 sq. mm. multistrand copper conductor cable as earth continuity wire drawn in conduit. complete in all respect.(DSR 2022E&M, 1.14.2) |
| 94 | S&F of 32Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle iron bracket of cat.Bcomplete in all respect.(DSR 2022E&M, 3.2.2) |
| 95 | Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.(DSR 2022E&M, 1.30) |
| 96 | Supply and fixing of electronic fan dimmer, 300/400 watt, ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.( S.I. No.1139,Pg.181) |
| 97 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified (S.I.No.725B,Pg.139) |
| 98 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.single pole .DSR 2022 E/M, 2.10.1 |
| 99 | S/F of factory wired,18-22 watt LED batten fitting Category AAA complete in all respect.(S.I.No. 23.08) |
| 100 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 75 to 90 Watt. Confirming to IP 65 protection of CAT-AAA complete in all respect. (S.I.No.23.16, Pg. 17) |
| 101 | Supply & Fixing of 40 - 50 Watt LED Surface Mounting weather proof flood light Luminaire with PC Housing and opal finish cover confirming to IP 65 Complete in all respect. CAT-AAA (S.I.No. 23.22) Please Enable Macros to View BoQ information |
